First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup Instruction Manual

1. Introduction and Overview

The First Alert SMI100-AC Hardwire Interconnect Smoke Alarm with Battery Backup is designed to provide early warning in the event of a home fire emergency. This alarm utilizes Precision Detection advanced sensing technology, complying with new industry standards to reduce nuisance alarms while ensuring reliable fire detection. Its hardwire interconnectivity means that when one alarm sounds, all compatible alarms in your system will activate, enhancing overall home safety. The integrated battery backup ensures continuous protection even during power outages.

2. Негизги өзгөчөлүктөрү

• Так аныктоо технологиясы: Advanced sensing technology for early warning and reduced nuisance alarms.
• Hardwire Interconnect: When one alarm sounds, all compatible alarms in the system will activate.
• Батареянын камдык көчүрмөсү: A 9V alkaline battery provides continuous protection during power outages.
• Ойготкучтун көрсөткүчү: Visually identifies the unit that initiated the alarm.
• Тез туташуу сайгычы: Facilitates easy installation without the need for rewiring.

3. Пакеттин мазмуну

Пакет төмөнкү нерселерди камтыйт:

• First Alert SMI100-AC Smoke Alarm
• Easy Adapter Plug
• 9V щелочтуу батарейка
• Кронштейн орнотуу
• Бурамалар жана анкерлер
• User Manual

4. Орнотуу жана орнотуу

1. Биринчи коопсуздук: Before beginning installation, ensure the power to the area where the smoke alarm will be installed is turned off at the circuit breaker.
2. Монтаждоо жери: Install smoke alarms on every level of your home and in every bedroom. Refer to the diagram below for recommended placement. Avoid installing near windows, doors, or areas with high airflow, which can interfere with smoke detection.
   

   Image: Diagram showing recommended placement of smoke alarms, carbon monoxide alarms, and fire extinguishers in a typical home layout, including bedrooms, hallway, living room, kitchen, basement, and garage.
3. Монтаждык кронштейн: Attach the mounting bracket to the electrical box using the provided screws and anchors. Ensure the bracket is securely fastened to the ceiling or wall.
4. Зымдар: Connect the Easy Adapter Plug to your home's existing 120V AC electrical wiring. The alarm is designed for standard hardwire connections.
   

   Сүрөт: Артка view of the First Alert SMI100-AC smoke alarm showing the wiring connection port.

5. Батарея орнотуу: Insert the included 9V alkaline battery into the battery compartment on the back of the alarm. Ensure correct polarity. If there is a battery activation tab, pull it out to activate the battery.
6. Сигнализацияны тиркөө: Түтүн сигнализациясын орнотуу кронштейнине тегиздеп, ал ордуна бекем бекитилгенге чейин саат жебеси боюнча бураңыз.
7. Күчтү калыбына келтирүү: Turn on power at the circuit breaker. The green power indicator light on the alarm should illuminate, indicating it is receiving AC power.
8. Сыноо ойготкуч: Press and hold the 'Test/Silence' button on the alarm for a few seconds until the alarm sounds. All interconnected alarms should also sound. Release the button to silence the alarm. Test weekly to ensure proper function.

5. Иштөө нускамалары

• Күч көрсөткүчү: A green LED light on the alarm indicates that the unit is receiving AC power and the battery backup is active.
• Ойготкучтун көрсөткүчү: When smoke is detected, the alarm will emit a loud siren, and a red LED will flash rapidly. In an interconnected system, all compatible alarms will sound. The specific unit that detected the smoke will have its red LED flashing more frequently to help identify the source.
• Унчукпоо өзгөчөлүгү: To temporarily silence a nuisance alarm (e.g., from cooking smoke), press the 'Test/Silence' button. The alarm will silence for approximately 10 minutes before resetting. If smoke is still present after the silence period, the alarm will reactivate.

6. Техникалык тейлөө

• Кадимки тестирлөө: Test your smoke alarm weekly by pressing the 'Test/Silence' button to ensure it is functioning correctly.
• Тазалоо: Dust and debris can affect alarm performance. Gently vacuum the alarm's cover and vents monthly using a soft brush attachment. Do not paint the alarm.
• Батареяны алмаштыруу: Replace the 9V alkaline battery annually, or immediately if the low battery chirp sounds.
• Бирдикти алмаштыруу: Smoke alarms have a limited lifespan. Replace the entire unit at least every 10 years from the date of manufacture. The manufacture date is located on the back of the alarm.
  

  Image: Visual guide for regular testing and replacement of smoke alarms every 10 years.

7. Кыйынчылыктарды

• Жалган ойготкучтар: If the alarm sounds without apparent smoke, ensure the area is clear of steam, cooking fumes, or excessive dust. Use the silence feature if it's a nuisance alarm.
• Intermittent Chirping: A single chirp every 60 seconds usually indicates a low battery. Replace the battery immediately.
• Кубат жок: If the green power indicator is off, check the circuit breaker and ensure the alarm is properly connected to the hardwire.
• Сигнализация текшерилбей жатат: If the alarm does not sound when the test button is pressed, ensure the battery is correctly installed and fully charged, and that the unit is receiving AC power. If the issue persists, the unit may need to be replaced.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For customer service or technical support regarding your First Alert SMI100-AC smoke alarm, please contact First Alert directly. You can reach their Customer Service Team at 1-800-323-9005 же алардын кызматына барат webсайтында firstalert.com.