DORHEA Wireless Remote Control Switch 30A Relay Switch User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your DORHEA Wireless Remote Control Switch. This device is designed to provide convenient remote control for various electrical equipment, offering flexibility and enhanced control in smart home, industrial, and security applications.

2. Продукциянын өзгөчөлүктөрү

• Жогорку которуу жөндөмдүүлүгү: Built-in power relay with 30A switching capacity for stable and reliable performance.
• Кеңейтилген диапазон: Utilizes RF technology to transmit signals through walls, floors, and doors, with an effective range of 100 to 328 feet (30 to 100 meters) without obstacles.
• Secure Learning Code: Features a high-security learning code with low repetitive rates and a re-learn mode. Old codes can be deleted and new ones learned, ensuring control even if a remote is lost.
• Ийкемдүү иштөө режимдери: Supports Momentary, Toggle, and Latched working modes, allowing customization for various applications.
• Кеңири колдонуу: Suitable for controlling lighting, fans, small appliances, air conditioners, heaters, audio systems, security alarms, and more.

3. Пакеттин мазмуну

• 1 x зымсыз алыстан башкаруу
• 1 x 30A Relay Receiver Switch

Image: The DORHEA wireless remote control and the 30A relay receiver unit, showing their compact design.

4. Техникалык шарттар

Image: Detailed dimensions of the remote control (61mm x 28mm) and the receiver unit (65mm x 43mm x 29mm).

5. Коопсуздук маалыматы

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

• Электр коркунучу: Installation should only be performed by a qualified electrician or knowledgeable individual. Ensure power is disconnected at the circuit breaker before any wiring.
• Тtage Шайкештик: тtage of your electrical system matches the operating voltage range of the switch (AC 100V-240V).
• Жүктөө жөндөмдүүлүгү: Do not exceed the maximum load current of 30 Amps. Overloading can cause overheating and fire.
• Туура зымдар: Ensure all wire connections are secure and correctly terminated to prevent short circuits or loose connections.
• Экологиялык шарттар: Аппаратты нымдуулукка, экстремалдык температурага же коррозиялуу чөйрөгө тийгизбеңиз.

6. Орнотуу жана зымдар

The receiver unit must be wired into your electrical circuit. Always ensure power is OFF before beginning installation.

6.1 Basic Wiring Overview

Image: A simplified diagram showing the input and output connections for the receiver unit and its connection to a load (e.g., a light bulb).

6.2 Wiring for Single Phase 110V/120V Application

1. Connect the red wire from your AC input to the 'L' terminal of the receiver's AC Input.
2. Connect the black wire from your AC input to the 'N' terminal of the receiver's AC Input.
3. Connect the red wire from the receiver's AC Output 'L' terminal to the 'L' terminal of your equipment/load.
4. Connect the black wire from the receiver's AC Output 'N' terminal to the 'N' terminal of your equipment/load.
5. Ensure the green ground wire from your input connects to the equipment's green ground wire.

Image: Detailed wiring diagram for connecting the receiver in a single-phase 110V/120V electrical system, showing input, output, and load connections.

6.3 Wiring for Single Phase 240V or 3 Phase Voltage Application (with AC Contactor)

Жогорку том үчүнtage or 3-phase applications, an external AC Contactor is required to handle the main load. The wireless switch will control the contactor's coil.

1. Connect the red wire from your AC input (e.g., L1) to the 'L' terminal of the receiver's AC Input.
2. Connect the black wire from your AC input (e.g., L2 or Neutral) to the 'N' terminal of the receiver's AC Input.
3. Connect the red wire from the receiver's AC Output 'L' terminal to one side of the AC Contactor's coil (e.g., A1).
4. Connect the black wire from the receiver's AC Output 'N' terminal to the other side of the AC Contactor's coil (e.g., A2).
5. Wire the main 240V or 3-phase power through the main contacts of the AC Contactor to your equipment/load.

Image: Detailed wiring diagram for controlling a 240V or 3-phase load using an external AC Contactor, with the wireless switch activating the contactor's coil.

7. Иштөө режимдери

The receiver supports three primary operating modes: Momentary, Toggle, and Latched. The specific mode is set during the pairing process.

7.1 Убакыт режими

In Momentary mode, the relay activates only while the remote button is pressed and held. Releasing the button deactivates the relay.

• Операция: Press and hold remote button → Relay ON; Release remote button → Relay OFF.
• Колдонмо: Ideal for applications requiring temporary activation, such as electric door openers or momentary pump control.

7.2 Которуу режими

In Toggle mode, each press of the remote button alternates the relay state between ON and OFF.

• Операция: Press remote button → Relay ON; Press same button again → Relay OFF.
• Колдонмо: Suitable for standard ON/OFF control of lights, fans, or other appliances.

7.3 Кулпуланган режим

Latched mode requires two distinct buttons on the remote. One button turns the relay ON, and another button turns it OFF.

• Операция: Press Button A → Relay ON; Press Button B → Relay OFF.
• Колдонмо: Useful for specific ON/OFF controls where distinct buttons are preferred, such as roller blind doors (up/down).

8. Pairing Remote Control (Learning Mode)

To pair a remote control with the receiver and set its operating mode:

1. Momentary Mode Setup:
   • Press the learning button on the receiver бир жолу. The LED indicator will flash once.
   • Immediately press the desired button on your remote control. The LED indicator will flash multiple times, indicating successful pairing in Momentary mode.
2. Toggle Mode Setup:
   • Press the learning button on the receiver эки жолу. The LED indicator will flash twice.
   • Immediately press the desired button on your remote control. The LED indicator will flash multiple times, indicating successful pairing in Toggle mode.
3. Latched Mode Setup:
   • Press the learning button on the receiver үч жолу. The LED indicator will flash three times.
   • Immediately press the 'ON' button (e.g., Button A) on your remote control.
   • After 3 seconds, press the 'OFF' button (e.g., Button B) on your remote control. The LED indicator will flash multiple times, indicating successful pairing in Latched mode.

9. Кабыл алгычты баштапкы абалга келтирүү

To clear all paired remote controls from the receiver's memory:

1. Long press the learning button on the receiver for approximately 8 секунд.
2. The LED indicator will flash rapidly and then turn off, indicating that all previously learned transmitters have been cleared.
3. After a reset, all remote controls will no longer function and must be re-paired using the learning procedure described in Section 8.

10. Тиркемелер

The DORHEA Wireless Remote Control Switch offers versatile applications, including but not limited to:

• Lighting control (indoor and outdoor)
• Желдетүүчү башкаруу
• Pump control (e.g., irrigation systems, water features)
• Garage door and roller blind door control
• Industrial electrical equipment activation
• Security systems and anti-theft alarms
• Holiday decorations and charging devices
• Remote control for workshop vacuums or other electronic devices

Сүрөт: Мисamples of common applications, including controlling outdoor fountains, garage doors, home lighting, and irrigation systems.

11. Техникалык тейлөө

The DORHEA Wireless Remote Control Switch is designed for minimal maintenance. Follow these guidelines to ensure longevity:

• Тазалоо: Түзмөктү кургак, жумшак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
• Текшерүү: Зымдардын туташууларынын бекемдигин жана эскирүү же бузулуу белгилерин мезгил-мезгили менен текшерип туруңуз.
• Батареяны алмаштыруу: If the remote control's range decreases or it becomes unresponsive, replace its battery (type not specified, typically a small coin cell or A27/23A type).
• Курчап турган чөйрө: Ensure the receiver is installed in a dry, protected location away from direct sunlight, moisture, and extreme temperatures.

12. Кыйынчылыктарды

13. Кепилдик жана колдоо

DORHEA products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt for warranty claims.