BONTEC Single Monitor Arm Desk Mount User Manual

1. Киришүү

Thank you for choosing the BONTEC Single Monitor Arm Desk Mount. This product is designed to enhance your workspace ergonomics and efficiency by providing a flexible and stable mounting solution for your monitor. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor arm. Please read it thoroughly before beginning installation and keep it for future reference.

Figure 1: ашыкview of the BONTEC Single Monitor Arm Desk Mount, showcasing its adjustable arm and dual mounting options (C-clamp and grommet base).

2. Коопсуздук маалыматы

Please observe the following safety precautions to prevent injury or damage to your equipment:

• Салмак сыйымдуулугу: Do not exceed the maximum weight capacity of 19.8 lbs (9 kg). Overloading can cause instability and potential damage.
• Экрандын өлчөмү: This mount is designed for screens between 13 and 34 inches.
• VESA шайкештиги: Ensure your monitor has VESA 75x75mm or 100x100mm mounting holes.
• Үстөлдүн калыңдыгы: Verify your desk thickness is within the specified range for C-clamp (0.39" to 3.35" / 10mm to 85mm) or Grommet base (0.39" to 3.35" / 10mm to 85mm, hole diameter 0.39" to 2.36" / 10mm to 60mm).
• Ассамблея: Assemble the product exactly as instructed. Improper assembly can lead to product failure.
• Кыймылдуу бөлүктөр: Be aware of pinch points when adjusting the arm. Keep hands clear of moving parts.
• Газ булагы: The gas spring is under high pressure. Do not attempt to disassemble it. Adjust tension carefully as per instructions.

3. Пакеттин мазмуну

Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact BONTEC customer support.

• Монитор курал ассамблеясы
• Desk Clamp База
• Grommet Негизги компоненттери
• VESA плитасы
• Аппараттык комплект (бурамалар, шайбалар, алты бурчтуу ачкычтар)
• Instruction Manual

4. Техникалык шарттар

Figure 2: The monitor arm is compatible with screens from 13 to 34 inches and supports up to 19.8 lbs, featuring VESA 75x75mm and 100x100mm patterns.

5. Орнотуу жана орнотуу

The BONTEC monitor arm offers two installation methods: C-clamp and Grommet base. Choose the method best suited for your desk.

5.1 Орнотуу вариантын тандаңыз

Figure 3: Illustration of the two available installation methods: Desk Clamp (C-clamp) and Grommet Base, along with their respective desk thickness and hole diameter requirements.

5.1.1 C-Clamp Орнотуу

1. C-cl тиркеңизamp to the main pole of the monitor arm.
2. C-clamp on the edge of your desk, ensuring it is stable and secure.
3. Клamp screw until the mount is firmly attached to the desk. The C-clamp includes silicone sleeves and an EVA pad to protect your desk surface.

5.1.2 Тырмактын негизин орнотуу

1. If your desk has a grommet hole, insert the grommet base components through the hole.
2. Берилген жабдыктарды колдонуп, столдун астындагы рычагдын негизин бекитиңиз.
3. Attach the main pole of the monitor arm to the secured grommet base.

5.2 Мониторду тиркөө

The VESA plate is detachable for easy monitor attachment.

Figure 4: Step-by-step guide for attaching the VESA plate to your monitor and then securely mounting it onto the monitor arm. Hand screws are used for convenience.

1. Remove the VESA plate from the monitor arm by lifting it up.
2. VESA плитасын мониторуңуздун артындагы (75x75мм же 100x100мм) орнотуу тешиктерине тууралаңыз.
3. Secure the VESA plate to the monitor using the appropriate screws from the hardware kit. Hand screws are provided for easy installation without a screwdriver.
4. Carefully slide the monitor with the attached VESA plate onto the monitor arm until it clicks securely into place.

6. Иштөө нускамалары

The BONTEC monitor arm features a gas spring system for smooth and effortless adjustments.

6.1 Монитордун абалын тууралоо

Figure 5: The monitor arm offers extensive flexibility with ±90° tilt, ±90° swivel, and full 360° rotation for optimal viewбурчтар.

• Россия: Gently push or pull the top or bottom of your monitor to achieve the desired vertical angle (±90°).
• Айлануучу: Мониторду тууралоо үчүн горизонталдуу буруңуз viewing angle left or right (±90°).
• Айлануу: Пейзаждык жана тигинен багыттардын ортосунда которулуу үчүн мониторду 360° буруңуз.
• Бийиктигин тууралоо: The gas spring arm allows you to effortlessly raise or lower your monitor to your preferred ergonomic height, up to a maximum of 25 inches from the tabletop.
• Кеңейтүү: Extend or retract the arm to adjust the distance of your monitor from your eyes, up to a maximum extension of 22.44 inches.

Figure 6: The monitor arm facilitates easy transition between sitting and standing positions, promoting ergonomic posture and reducing strain during long work sessions.

6.2 Газ пружинасын чыңоону жөндөө

The gas spring tension may need adjustment to properly support your monitor's weight. The arm features a robust 750 N·m gas spring.

Figure 7: The monitor arm is equipped with a powerful 750 N·m gas spring, ensuring stable and smooth adjustments for monitors up to 19.8 lbs.

1. If the monitor sags or does not stay in position, increase the tension. Use the provided Allen key to turn the adjustment screw (usually located on the arm near the VESA plate or main pole) clockwise.
2. If the monitor floats up or is difficult to push down, decrease the tension. Turn the adjustment screw counter-clockwise.
3. Adjust gradually and test the arm's movement until the monitor stays in place at any desired height.

6.3 Кабелди башкаруу

The monitor arm includes integrated cable management clips to keep your workspace tidy.

Figure 8: Utilize the built-in cable management system to route and conceal monitor cables, reducing clutter and maintaining a clean, organized desk.

Route your display and power cables through the clips or channels along the arm to maintain a clean and organized workspace.

7. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө мониторуңуздун узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.

• Тазалоо: Wipe the arm with a soft, damp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Текшерүү: Бардык бурамаларды жана туташууларды бекем жана бекем экенин текшерүү үчүн мезгил-мезгили менен текшерип туруңуз. Зарыл болсо, кайра бекемдеңиз.
• Газ булагы: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.

8. Кыйынчылыктарды

If you encounter issues with your monitor arm, refer to the following common problems and solutions:

• Monitor Sags or Does Not Stay Up:
  • The monitor may be too heavy for the current gas spring tension. Increase the gas spring tension by turning the adjustment screw clockwise.
  • Ensure the monitor's weight is within the specified range (6.6 - 19.8 lbs).
• Monitor Floats Up or is Difficult to Push Down:
  • The gas spring tension is too high for the monitor's weight. Decrease the gas spring tension by turning the adjustment screw counter-clockwise.
• Arm is Loose or Wobbly:
  • Бардык орнотуу бурамаларын текшериңиз (C-clamp/grommet base and VESA plate) and tighten them securely.
  • Ensure the desk surface is stable and thick enough for the chosen mounting method.
• Monitor Does Not Tilt/Swivel Smoothly:
  • Check for any obstructions.
  • Ensure all pivot points are free of debris. Do not lubricate.

9. Кепилдик жана колдоо

BONTEC products are manufactured with high-quality materials and craftsmanship. For any questions, concerns, or warranty claims, please contact BONTEC customer support through the retailer where you purchased the product or visit the official BONTEC webбайланыш маалыматы үчүн сайт.

Please have your model number (GDM7503) and purchase details ready when contacting support.