Introduction
Thank you for choosing the NEXX X.Wed 2 Helmet. This manual provides essential information for the proper use, maintenance, and care of your helmet. Please read it thoroughly before using your helmet to ensure maximum safety and performance. The NEXX X.Wed 2 is a versatile helmet designed for various riding conditions, offering advanced protection and comfort.
Figure 1: NEXX X.Wed 2 Helmet, Wild Country Light Sand/Grey MT. This image displays the helmet's design, including the peak, main visor, and chin bar, highlighting its multi-terrain aesthetic.
Коопсуздук маалыматы
Your NEXX X.Wed 2 helmet is designed to meet stringent safety standards. It complies with DOT FMVSS 218 regulations, ensuring a high level of protection. Always wear a properly fitted helmet when riding. Never modify your helmet, as this can compromise its protective capabilities.
Маанилүү: A helmet cannot protect against all possible impacts. For maximum protection, the helmet must fit properly and be securely fastened. Replace your helmet immediately after any impact, even if visible damage is not apparent.
Негизги өзгөчөлүктөрү
- X-MATRIX Shell: Constructed from multiaxial fiberglass, 3D organic fibers, special aramid fibers, and carbon reinforcement for superior strength and lightweight performance.
- DOT FMVSS 218 Certified: Meets rigorous safety standards.
- X.MART DRY Fabrics: Advanced interior lining for moisture-wicking and comfort.
- 80% Tint Inner Sun Visor: Integrated sun visor for quick adaptation to changing light conditions.
- Air Dynamic System: Features 3 inlets and 4 outlets for optimal airflow and ventilation.
- Pinlock Ready Visor: Main visor is prepared for Pinlock anti-fog inserts (sold separately).
- Double D-Ring Buckle: Secure and reliable retention system.
- Emergency Strap V2: Designed for quick and safe helmet removal in emergencies.
- Panoramic Eye Port: Provides a wide field of vision.
- 3D Lining and Cheek Pads: Гигиена жана ыңгайлуулук үчүн алып салууга жана жууганга болот.
- Prepared for X-COM – NEXX Intercom System: Integrated design for easy installation of communication systems.
- PC Lexan Shield Clear: Main visor with anti-fog position and Super Lock mechanism.
- X-Block Quick Release System: For easy visor removal.
- Chin Wind Stopper: Reduces wind noise and turbulence.
- Night Vision - Reflectors: Жарык аз шарттарда көрүнүүнү жакшыртат.
- Aerodynamic Shell & Rim: Optimized for stability at speed.
- Ergo Padding System: Customizable fit for various head shapes.
- Peak Extensor: Adjustable peak for sun protection.
- Action Camera Support: Integrated mounts on top and sides for action cameras.
- Prepared for Quick Strap: For goggle retention.
- Special Chin Shape: Designed to reduce breast injury risk from frontal impacts.
Орнотуу жана баштапкы колдонуу
1. Helmet Fit
Ensure the helmet fits snugly around your head without causing pressure points. It should not move freely when you shake your head. The cheek pads should press firmly against your cheeks. If the fit is too loose, consider using the Ergo Padding System for a more customized fit or a different size helmet.
2. Securing the Double D-Ring Buckle
- Боону эки D-шакекче аркылуу өткөрүңүз.
- Loop the strap back through the first D-ring only.
- Pull the strap tight against your throat. Ensure the strap is snug and comfortable.
3. Visor Installation/Removal (X-Block Quick Release System)
To remove the main visor, open it fully, then press the release buttons on both sides of the visor mechanism. Gently pull the visor away from the helmet. To install, align the visor tabs with the slots on the helmet's mechanism and push until they click into place. Ensure both sides are securely fastened before riding.
4. Adjusting the Peak Extensor
The peak can be extended or retracted to optimize sun protection. Loosen the screws on the sides of the peak, adjust to the desired position, and then re-tighten the screws firmly.
Operating Your Helmet
1. Using the Inner Sun Visor
The 80% tint inner sun visor can be deployed or retracted using the slider mechanism located on the left side of the helmet. Slide it down to engage the sun visor and up to retract it. Do not use the sun visor in low light conditions or at night.
2. Adjusting Ventilation (Air Dynamic System)
The helmet features multiple adjustable vents for optimal airflow:
- Эяк желдеткичи: Located on the front of the chin bar. Slide the control to open or close for airflow to the face and visor.
- Үстүнкү желдеткичтер: Located on the crown of the helmet. Slide the controls to open or close for airflow over the scalp.
- Rear Extractors: These are passive vents that work with the front vents to draw hot air out of the helmet. Ensure they are not obstructed.
3. Action Camera Mounts
The helmet includes integrated mounts on the top and sides for attaching action cameras. Ensure your camera is securely fastened before riding. Refer to your camera's manual for specific mounting instructions.
Техникалык тейлөө жана кам көрүү
1. Кабыктарды тазалоо
Туулганын кабыгын жумшак, d менен тазалаңызamp cloth and mild soap. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the shell material and graphics. Rinse thoroughly with clean water and dry with a soft cloth.
2. Visor Cleaning
Remove the visor for cleaning. Wash with lukewarm water and mild soap. Use a soft cloth or sponge. Do not use abrasive materials. Rinse thoroughly and allow to air dry or gently pat dry with a microfiber cloth. Avoid wiping the visor when dry, as this can scratch the surface.
3. Interior Lining Care (X.MART DRY Fabrics)
The 3D lining and cheek pads are removable and washable. Gently detach them from the helmet. Hand wash with mild soap and cool water. Do not machine wash or tumble dry. Allow them to air dry completely before re-installing into the helmet. Ensure all components are dry to prevent mildew.
4. Сактоо
Туулгаңызды салкын, кургак, күн нуру түз тийбеген жана өтө жогорку температурадан алыс жерде сактаңыз. Аны чаңдан жана чийиктен коргоо үчүн туулга баштыгын колдонуңуз.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Көз айнекти тумандатуу | Аба агымынын жетишсиздиги, температуранын айырмасы | Open chin vent, slightly open visor to anti-fog position, consider installing a Pinlock insert. |
| Туулга өтө тар/бош сезилет | Incorrect size, improper padding adjustment | Ensure correct size. Utilize the Ergo Padding System for minor adjustments. If still uncomfortable, the helmet size may be incorrect. |
| Ашыкча шамалдын ызы-чуусу | Vents open, chin wind stopper not installed/seated correctly | Close unused vents. Ensure chin wind stopper is properly installed. Check visor seal. |
Техникалык мүнөздөмөлөр
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | X.Wed 2 |
| Shell Material | X-MATRIX (multiaxial fiberglass, 3D organic fibers, aramid fibers, carbon reinforcement) |
| Коопсуздук стандарты | DOT FMVSS 218 |
| Салмагы (болжол менен) | 1400gr (Street Version) / 1500gr (Dual Version) |
| Ички подкладка | X.MART DRY fabrics, removable and washable 3D lining and cheek pads |
| Сактоо системасы | Double D-Ring buckle |
| Main Visor | PC Lexan Shield Clear with Anti-Fog position and Super Lock, Pinlock ready |
| Ички күн коргоочу | 80% Tint |
| Вентиляция | Air Dynamic System (3 inlets, 4 outlets), Chin Ventilation |
| Өзгөчөлүктөр | Emergency Strap V2, Panoramic Eye Port, X-Block Quick Release System, Chin Wind Stopper, Night Vision - Reflectors, Aerodynamic Shell & Rim, Ergo Padding System, Peak Extensor, Action Camera Support (top and sides), Prepared for X-COM and Quick Strap. |
Кепилдик жана колдоо
For specific warranty information regarding your NEXX X.Wed 2 helmet, please refer to the warranty card included with your purchase or visit the official NEXX Helmets website. For technical support, spare parts, or any other inquiries, please contact your authorized NEXX dealer or the manufacturer's customer service department.
Онлайн ресурстар: For additional information, FAQs, and product updates, please visit the official NEXX Helmets webсайт.
