User Manual

1. Киришүү

This manual provides detailed instructions for the setup, operation, and maintenance of your Waytronic Infrared Motion Sensor Activated Sound Speaker. This device is designed to detect motion and play a pre-recorded or custom voice message, serving various purposes such as greeting visitors, providing security alerts, or acting as a reminder.

2. Продукциянын өзгөчөлүктөрү

The Waytronic Infrared Motion Sensor Activated Sound Speaker offers the following key functionalities:

• Customizable Voice Recording: Equipped with a built-in microphone, allowing users to record and customize their own voice messages. Recording is initiated by pressing a button.
• Кеңейтилген жаздыруу кубаттуулугу: Supports recording up to 130 seconds, with the ability to segment recordings.
• Кең кыймылды аныктоо: Features a detection range with a 120-degree horizontal and 60-degree vertical angle.
• Жөнгө салынуучу Көлөмү: Provides two distinct volume levels for clear audio output.
• Ийкемдүү кубат параметрлери: Can be powered by three AAA dry batteries or a DC5V USB power supply.
• Easy Re-recording: Messages can be re-recorded as many times as needed, simply by pressing a button.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Infrared Motion Sensor Activated Sound Speaker (Black)
• Монтаждоо бурамалар
• Ball Mounting Accessories
• Колдонуучунун Колдонмосу (бул документ)

4. Продукт бүтүп калдыview

4.1-сүрөт: Алдыңкы жана каптал view of the Waytronic Infrared Motion Sensor Activated Sound Speaker. The front features the PIR sensor and speaker grille, while the side shows the mounting bracket.

4.2-сүрөт: Детальдуу алдыңкы view of the speaker with key components labeled: PIR Sensor, Volume/ON/OFF switch, Button A (Record), Button B (Play/Stop), and the built-in speaker/microphone. The ball mounting accessory is also shown.

4.3-сүрөт: Арткы view of the speaker showing the Screw Mounting Hole, Bracket Mounting points, and the Battery Case for three AAA batteries.

4.4-сүрөт: Side view illustrating the USB port for power supply (DC5V) and the 360-degree rotatable mounting bracket.

5. Орнотуу

1. Электр камсыздоо:
   • Insert three AAA batteries into the battery case located on the back of the device (refer to Figure 4.3). Ensure correct polarity.
   • Alternatively, power the device using a DC5V USB cable connected to the USB port on the side (refer to Figure 4.4).
2. Монтаждоо жери:
   • Choose an indoor location such as a front door, corridor, or shop entrance.
   • For optimal performance and to prevent false triggers, avoid areas with direct sunlight, significant temperature variations, or proximity to air conditioners and heaters.
3. Аппаратты орнотуу:
   • Use the provided mounting screws and ball mounting accessories to secure the speaker to a wall or surface. The ball mounting allows for 360-degree rotation to adjust the detection angle.
   • Ensure the PIR sensor (Figure 4.2) faces the area where motion detection is desired.

6. Операция

6.1. Recording a Message

1. Ensure the device is powered on using the Volume/ON/OFF switch (Figure 4.2).
2. Басып кармап туруңуз Button A (Record). The indicator light may change to confirm recording mode.
3. Speak clearly into the built-in microphone (located near the speaker grille, Figure 4.2). The maximum recording time is 130 seconds.
4. бошотуу А баскычы to stop recording. A successful recording typically requires more than 3 seconds of audio.
5. To re-record, simply repeat the process. The new recording will overwrite the previous one.

6.2. Playing a Message

1. After recording, the device is ready to play the message upon motion detection.
2. To manually play the current message, press Button B (Play/Stop). Press again to stop playback.

6.3. Үндү тууралоо

колдонуу Volume/ON/OFF switch (Figure 4.2) to select between two volume levels. Slide the switch to the desired position.

6.4. Motion Detection

Once powered on and a message is recorded, the device will automatically play the message when motion is detected within its 120-degree horizontal and 60-degree vertical detection range.

6.1-сүрөт: This diagram illustrates that audio files are changed via button recording, not through USB data cable or TF card.

7. Тиркемелер

The Waytronic Motion Sensor Speaker can be utilized in various scenarios:

• Greeting Visitors: Place at an entrance to play a welcoming message.
• Security Reminder: Record a warning message to deter intruders or remind individuals of security protocols.
• Daily Audio Reminders: Use for personal reminders in homes or offices.
• Sale Advertising: Play promotional messages in retail environments.
• Animal Deterrent: Record sounds to discourage animals from entering certain areas.
• Event Enhancement: Integrate into festive displays or haunted house setups for interactive sound effects.

7.1-сүрөт: Examples of applications including entrance door greeting, celebrating festivals, and home daily reminders.

7.2-сүрөт: The speaker used to greet visitors upon entry.

7.3-сүрөт: The speaker playing a security message to an approaching individual.

7.4-сүрөт: The speaker used to deter animals, such as a lemur, with an audible message.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Коопсуздук маалыматы

• Аппаратты экстремалдык температурага, түз күндүн нуруна же жогорку нымдуулукка дуушар кылбаңыз.
• Аппаратты суудан жана башка суюктуктардан алыс кармаңыз.
• Түзмөктү өз алдынча ачууга же оңдоого аракет кылбаңыз. Тейлөө үчүн квалификациялуу адистерге кайрылыңыз.
• Dispose of batteries according to local regulations. Do not mix old and new batteries or different types of batteries.
• Keep out of reach of children to prevent accidental ingestion of small parts or batteries.

11. Кардарларды колдоо кызматы

If you have any questions or encounter issues with your Waytronic Infrared Motion Sensor Activated Sound Speaker, please contact our customer support team. We are committed to assisting you within 24 hours.

Колдоо үчүн, кириңиз Waytronic Store on Amazon же сатып алууңуз менен берилген байланыш маалыматын караңыз.