Varmilo VPE87

Varmilo VPE87 Chang'e TKL механикалык клавиатурасы колдонуучунун колдонмосу

Model: VPE87

Introduction

The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

Пакеттин мазмуну

  • Varmilo VPE87 Mechanical Keyboard
  • USB-C Cable
  • 2.4 GHz Wireless Receiver (typically stored in keyboard)
  • Баскыч капкагын тартуучу (кошулушу мүмкүн)
  • Которгучту тартуучу (кошулушу мүмкүн)

Жайгашуу

Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.

1. Physical Connection and Initial Charge

Close-up of the USB-C port on the Varmilo VPE87 keyboard, showing the cable inserted into the 3-way cord channel.

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.

  1. Берилген USB-C кабелин клавиатуранын USB-C портуна туташтырыңыз.
  2. Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
  3. For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).

2. Баскычтоптун бурчун жөндөө

Side profile view of the Varmilo VPE87 keyboard, showing the adjustable kickstand extended to elevate the typing angle.

Сүрөт: Side profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.

The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.

Иштөө нускамалары

Байланыш режимдери

The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.

Зымдуу режим

  • Connect the USB-C cable from the keyboard to your computer.
  • Клавиатура сиздин операциялык системаңыз тарабынан автоматтык түрдө таанылат.
  • This mode also charges the keyboard's internal battery.

Bluetooth режими

  • Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
  • Түзмөгүңүздө (компьютер, планшет, смартфон) Bluetooth'ду иштетиңиз жана жаңы түзмөктөрдү издеңиз.
  • Select "Varmilo VPE87" (or similar name) from the list of available devices.
  • Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.

2.4 ГГц зымсыз режим

  • Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
  • USB ресиверди компьютериңиздеги жеткиликтүү USB портуна сайыңыз.
  • Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
  • Баскычтоп автоматтык түрдө ресиверге туташып турушу керек.

Арткы жарыкты башкаруу

Varmilo VPE87 keyboard with its white LED backlight illuminated, showing the keys clearly visible in a dark environment.

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.

The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:

  • Fn + Arrow Up: Арткы жарыктын жарыктыгын жогорулатыңыз.
  • Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
  • Fn + башка баскычтар: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.

Hotswap Sockets (Switch Customization)

Жогорудан төмөн view of the Varmilo VPE87 mechanical keyboard, showcasing its full layout with unique keycap designs and the overall aesthetic.

Сүрөт: Жогорку view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.

The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.

  1. Баскыч капкагын алып салуу: Use a keycap puller to gently remove the desired keycap.
  2. Которуштурууну алып салуу: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
  3. Жаңы которгуч киргизүү: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
  4. Баскыч капкагын алмаштыруу: Баскыч капкагын кайра жаңы которгучка коюңуз.

Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.

Башка өзгөчөлүктөр

  • Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
  • 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.

Техникалык тейлөө

Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.

  • Клавиатураны тазалоо:
    • Use a keycap puller to remove keycaps.
    • Wipe keycaps with a damp кездеме жана жумшак самын эритмеси. Катуу химиялык заттардан алыс болуңуз.
    • Ensure keycaps are completely dry before reattaching.
  • Баскычтоптун корпусун тазалоо:
    • Клавиатуранын бетин сүртүү үчүн жумшак, кургак чүпүрөктү колдонуңуз.
    • Ачкычтардын ортосундагы чаң жана таштанды үчүн кысылган абаны колдонуңуз.
  • Сактагыч: Клавиатураны күн нурунан жана экстремалдык температурадан алыс, салкын, кургак жерде сактаңыз.
  • Суюктуктар: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.

Проблемаларды чечүү

If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:

КөйгөйЧечим
Keyboard not responding in Wired Mode.
  • USB-C кабели клавиатурага жана компьютерге бекем туташып турганын текшериңиз.
  • Компьютериңиздеги башка USB портун колдонуп көрүңүз.
  • Башка USB-C кабелин колдонуп көрүңүз.
  • Ensure the keyboard is switched to Wired mode if it has a physical mode switch.
Bluetooth аркылуу туташуу мүмкүн эмес.
  • Ensure the keyboard is in Bluetooth pairing mode (refer to operating instructions).
  • Түзмөгүңүздө Bluetooth иштетилгенин текшериңиз.
  • Түзмөгүңүздүн Bluetooth жөндөөлөрүнөн клавиатуранын мурунку жупташтырууларын алып салып, кайра жупташтырып көрүңүз.
  • Баскычтоптун батареясы заряддалганын текшериңиз.
  • Баскычтопту да, түзмөгүңүздү да өчүрүп-күйгүзүп көрүңүз.
2.4 ГГц зымсыз байланыш туруксуз же иштебей жатат.
  • Ensure the 2.4 GHz USB receiver is securely plugged into a USB port.
  • Башка USB портун колдонуп көрүңүз.
  • Ensure the keyboard is in 2.4 GHz wireless mode.
  • Move the keyboard closer to the receiver to reduce interference.
  • Баскычтоптун батареясы заряддалганын текшериңиз.
Арткы жарык иштебейт же күңүрт.
  • Press Fn + Arrow Up to increase brightness.
  • Ensure the keyboard battery is charged, as low battery can affect backlight performance.
A specific key is not registering.
  • If the keyboard has hotswap sockets, gently remove the keycap and switch for the problematic key. Reinsert the switch firmly, ensuring the pins are straight and fully seated.
  • Мүмкүн болсо, башка которгуч менен текшериңиз.
  • Clean any debris around the switch.

Техникалык шарттар

ӨзгөчөлүкДеталь
БрендVarmilo
МоделVPE87
Keyboard DescriptionМеханикалык
Байланыш технологиясыBluetooth, USB-C (Wired), 2.4 GHz Wireless
Ачкычтардын саны87
Арткы жарыктандырууАк LED (бир түстүү)
ӨзгөчөлүктөрBacklit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel
Шайкеш түзмөктөрНоутбук, компьютер, смартфон, планшет
Color (Switches)Kailh Prestige Clicky (as per product listing)

Кепилдик жана колдоо

Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webсайт.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webсайты же продуктуну сатып алган сатуучу аркылуу.

Visit the official Varmilo Store for more information: Varmilo Store on Amazon

© 2023 Varmilo. All rights reserved.

Бул колдонмо маалыматтык максаттар үчүн гана. Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.