Swan B0CL9WRXMF

Swan Nordic 40cm Tripod Pedestal Fan Instruction Manual

Model: B0CL9WRXMF

Introduction

Сатып алганыңыз үчүн рахматasing the Swan Nordic 40cm Tripod Pedestal Fan. This manual provides important information regarding the assembly, operation, maintenance, and safety of your new fan. Please read these instructions carefully before use and retain them for future reference.

Swan Nordic 40cm Tripod Pedestal Fan, front view

Сүрөт: алдыңкы view of the Swan Nordic 40cm Tripod Pedestal Fan, showcasing its grey finish and wooden tripod legs.

Маанилүү коопсуздук нускамалары

Өрт, электр шок же жаракат алуу коркунучун азайтуу үчүн ар дайым төмөнкү коопсуздук чараларын аткарыңыз:

  • VoltagРейтинг этикеткасында көрсөтүлгөн e сиздин электр энергиясы менен камсыз кылуу көлөмүнө дал келетtage.
  • Do not operate any fan with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
  • Unplug the fan from the outlet when not in use, before cleaning, or before moving.
  • Желдеткичти, сайгычты же шнурду сууга же башка суюктуктарга салбаңыз.
  • Балдардын желдеткич менен ойношуна жол бербеңиз. Кандайдыр бир шайманды балдар колдонгондо же алардын жанында колдонгондо, катуу көзөмөл зарыл.
  • кыймылдуу бөлүктөргө тийбегиле.
  • Жарылуучу жана/же күйүүчү түтүн бар жерде желдеткичти иштетпеңиз.
  • Вентилятор оодарылып кетпеши үчүн, аны туруктуу, тегиз жерге коюңуз.
  • Вентилятор иштеп жатканда, торчого манжаларыңызды же башка буюмдарды киргизбеңиз.

Пакеттин мазмуну

Please check the contents of the box. If any items are missing or damaged, contact your retailer.

  • Fan Head Assembly (including motor, blades, and grilles)
  • Башкы полюс
  • Tripod Leg Assembly (3 wooden legs and connecting bracket)
  • Fixing Screws and Washers
  • Instruction Manual

Ассамблея жана орнотуу

Follow these steps to assemble your pedestal fan:

  1. Attach Tripod Legs: Carefully attach the three wooden tripod legs to the main pole's connecting bracket using the provided screws and washers. Ensure they are securely tightened to form a stable base.
  2. Insert Main Pole: Insert the main pole into the assembled tripod base. Secure it with any provided locking mechanisms or screws.
  3. Mount Fan Head: Place the fan head assembly onto the top of the main pole. Ensure it clicks into place or is secured with the designated screw/knob.
  4. Позициялоо: Place the assembled fan on a firm, level surface. Ensure there is adequate space around the fan for proper air circulation and to prevent obstruction of the grilles.
Swan Nordic 40cm Tripod Pedestal Fan in a room setting

Image: The Swan Nordic 40cm Tripod Pedestal Fan positioned in a modern living space, demonstrating its stable tripod base.

Иштөө нускамалары

This section details how to use your fan.

Powering On and Speed Control

  1. Кубатка туташуу: Plug the fan's power cord into a suitable electrical outlet.
  2. Ылдамдыкты тандоо: Locate the rotary switch on the motor housing at the back of the fan head. Turn the switch to select your desired speed setting:
    • "O": Өчүк
    • "Мен": Төмөн ылдамдык
    • "II": Орто ылдамдык
    • "III": Жогорку ылдамдык
Close-up of the fan's rotary switch and oscillation pin

Сүрөт: деталдуу view of the fan's control panel, showing the rotary switch for speed selection and the oscillation pull-pin.

Термелүү функциясы

The fan features an oscillation function to distribute air over a wider area.

  • To Start Oscillation: Push down the oscillation pin located on top of the motor housing.
  • To Stop Oscillation: Pull up the oscillation pin. The fan will then blow air in a fixed direction.

Эңкейүү бурчун тууралоо

The fan head can be tilted to direct airflow upwards or downwards.

  • Тууралоо үчүн: Loosen the tilt adjustment knob located on the side of the fan head support. Adjust the fan head to the desired angle, then securely tighten the knob to fix its position.
Hand adjusting the fan's rotary speed switch

Image: A hand demonstrating the operation of the rotary switch to select fan speed.

Тейлөө жана тазалоо

Үзгүлтүксүз тазалоо жана техникалык тейлөө желдеткичиңиздин оптималдуу иштешин камсыздайт жана анын иштөө мөөнөтүн узартат.

  • Ар дайым желдеткичти сууруп туруңуз тазалоодон мурун электр розеткасынан.
  • Тышкы тазалоо: жумшак колдонуу, damp вентилятордун сырткы беттерин сүртүүчү чүпүрөк. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
  • Тор жана бычактар: Dust can accumulate on the grilles and blades. Use a vacuum cleaner with a brush attachment or a soft, dry cloth to remove dust. For thorough cleaning, the front grille may be removed by unscrewing the retaining clips/screws (refer to assembly instructions in reverse). Ensure all parts are dry before reassembling and operating.
  • Сактагыч: Узак мөөнөткө колдонулбаганда, желдеткичти салкын, кургак жерде, эң жакшысы баштапкы таңгагында сактаңыз.

Проблемаларды чечүү

Эгер күйөрманыңызда көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

КөйгөйМүмкүн себепЧечим
Желдеткич күйбөйт.Электр энергиясы жок.
Вентилятор сайылган эмес.
Speed switch is OFF.
Электр розеткасын текшериңиз.
Сайгыч толугу менен киргизилгенин текшериңиз.
Turn the speed switch to I, II, or III.
Алсыз аба агымы.Төмөн ылдамдыкты жөндөө.
Торчолор же бычактар ​​кир.
Ылдамдык жөндөөсүн жогорулатыңыз.
Clean the grilles and blades as per maintenance instructions.
Желдетүүчү ызы-чуу.Бош бөлүктөр.
Вентилятор тегиз жерде эмес.
Check all screws and connections are tight.
Желдеткичти туруктуу, тегиз жерге коюңуз.
Термелүү иштебейт.Oscillation pin not engaged.Push down the oscillation pin firmly.

Бул чечимдерди колдонуп көргөндөн кийин көйгөй чечилбесе, кардарларды колдоо менен байланышыңыз.

Техникалык шарттар

  • Бренд: Swan
  • Модел: Nordic 40cm Tripod Pedestal Fan
  • Power / Wattage: 50 ватт
  • Тtage: 220 вольт (AC)
  • Ылдамдыктардын саны: 3
  • Материал: Metal (housing), Wood (tripod legs)
  • Элемент Салмагы: 5.5 кг
  • Продукциянын өлчөмдөрү: Approximately 50D x 50W centimetres
  • Өзгөчөлүктөр: Adjustable tilting head, Oscillation function, High quality metal housing, Tripod legs, Rotary switch.

Кепилдик жана колдоо

Specific warranty details are typically provided with your purchase documentation or can be found on the manufacturer's official webсайт. Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.

For technical support, spare parts, or service, please contact Swan customer service through their official channels. Contact information can usually be found on the product packaging or the brand's webсайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.