Torin AT82001B-2 Гидравликалык пол домкраттары жана домкрат тирөөчтөрүнүн айкалышкан колдонуучу колдонмосу

1. Продукт бүтүп калдыview

This manual provides essential instructions for the safe and effective use of your Torin AT82001B-2 Hydraulic Floor Jack and Jack Stands Combo. This combo includes one 2-ton (4,000 lb) hydraulic floor jack and two 2-ton (4,000 lb) jack stands, designed for lifting and supporting most passenger vehicles. Constructed from heavy-duty steel, these tools are built for durability and reliable performance in automotive maintenance tasks.

Figure 1: Torin AT82001B-2 Hydraulic Floor Jack and Jack Stands Combo. This image displays the complete set, including the black hydraulic floor jack with a yellow handle and two black jack stands.

2. Коопсуздук боюнча маанилүү маалымат

ЭСКЕРТҮҮ: Read, understand, and follow all instructions and warnings provided in this manual before using this product. Failure to do so may result in property damage, serious injury, or death. Keep this manual for future reference.

• Never exceed the rated capacity: The floor jack and jack stands are rated for 2 tons (4,000 lbs) each. Do not attempt to lift or support loads heavier than this capacity.
• Use on hard, level surface: Always operate the jack and place jack stands on a hard, level surface capable of supporting the load. Avoid soft ground, asphalt, or uneven surfaces.
• Chock wheels: Before lifting, always chock the wheels that are not being lifted to prevent unintended movement of the vehicle.
• Lift only on vehicle manufacturer's recommended lift points: Consult your vehicle's owner's manual for proper lifting points.
• Use jack stands for support: The hydraulic floor jack is a lifting device only. Immediately after lifting, transfer the load to appropriately rated jack stands. Never work under a vehicle supported only by a hydraulic jack.
• Center the load: Ensure the load is centered on the jack saddle and jack stand saddles. Off-center loads can cause instability.
• Integrated overload protection: The floor jack is equipped with an integrated overload protection valve to prevent lifting items beyond its capacity. Do not attempt to bypass or modify this safety feature.
• Ачык кармаңыз: Keep hands, feet, and other body parts clear of moving parts and pinch points during operation.
• Ар бир колдонуудан мурун текшерүү: Before each use, inspect the jack and jack stands for any signs of damage, leaks, or wear. Do not use if damaged.
• Туура сактоо: Store the jack and jack stands in a clean, dry place, away from moisture and corrosive materials.

3. Кутуда эмне бар

Your Torin AT82001B-2 package includes the following components:

• 1 x Hydraulic Floor Jack (2 Ton / 4,000 lb capacity)
• 2 x Jack Stands (2 Ton / 4,000 lb capacity each)
• 2 x User Manuals (this document)

Figure 2: The 2-Ton Hydraulic Floor Jack. This image shows the black hydraulic floor jack with its yellow carrying handle and wheels.

Figure 3: A pair of 2-Ton Jack Stands. This image displays two black jack stands, highlighting their adjustable height mechanism.

4. Орнотуу жана даярдоо

4.1. Floor Jack Preparation

1. Тутканы чогултуу: Insert the handle into the handle socket on the floor jack. Secure it according to the manufacturer's instructions (if applicable, some handles are two-piece).
2. Purge Air (Bleeding): Биринчи жолу колдонуудан мурун же домкрат көпкө сакталып турган болсо, гидравликалык системадан абаны чыгаруу зарыл болушу мүмкүн.
   • Аны ачуу үчүн, ачуучу клапанды саат жебесине каршы бир толук айлануу менен буруңуз.
   • Pump the handle rapidly 10-15 times without a load.
   • Turn the release valve clockwise to close it. The jack should now operate smoothly.
3. Гидравликалык суюктукту текшерүү: Ensure the hydraulic fluid level is adequate. Refer to the maintenance section for details on checking and refilling fluid.

4.2. Jack Stand Preparation

The jack stands are ready for use out of the box. Familiarize yourself with the height adjustment mechanism:

• To adjust height, lift the handle on the ratchet bar and slide the bar to the desired height.
• Ensure the ratchet bar is fully engaged in the base's teeth before placing any load.

Figure 4: Close-up of a Jack Stand's Adjustment Handle. This image highlights the mechanism for adjusting the height of the jack stand.

5. Иштөө нускамалары

Always follow the safety guidelines in Section 2 before proceeding.

5.1. Lifting a Vehicle with the Floor Jack

1. Унаа даярдоо: Park the vehicle on a hard, level surface. Engage the parking brake and place the transmission in "Park" (automatic) or a low gear (manual). Chock the wheels that will remain on the ground.
2. Жектин кызматы: Locate the vehicle manufacturer's recommended lifting point. Position the floor jack so its saddle is directly under this point. Ensure the load will be centered on the saddle.
3. Унаа көтөрүү: Turn the release valve clockwise until it is firmly closed. Pump the jack handle up and down to raise the vehicle to the desired height. Do not raise the vehicle higher than necessary.
4. Insert Jack Stands: Once the vehicle is lifted, immediately place jack stands under the vehicle's frame or other manufacturer-specified support points, adjacent to the jack. Adjust the jack stands to the appropriate height, ensuring the ratchet bar is fully engaged.
5. Lower onto Jack Stands: Slowly turn the release valve counter-clockwise to gradually lower the vehicle onto the jack stands. Ensure the vehicle is securely seated on both jack stands before removing the floor jack.
6. Джекти алып салуу: Once the vehicle is safely supported by the jack stands, remove the floor jack.

Figure 5: Close-up of the Floor Jack Saddle. This image shows the circular saddle where the vehicle's lifting point should be placed.

5.2. Унааны түшүрүү

1. Жектин кызматы: Place the floor jack saddle under the vehicle's lifting point, ensuring it is centered.
2. Lift Slightly: Turn the release valve clockwise to close it, then pump the jack handle a few times to lift the vehicle slightly off the jack stands.
3. Джек стенддерин алып салыңыз: Домкрат таянычтарын унаанын астынан этияттык менен алып салыңыз.
4. Төмөнкү унаа: Slowly turn the release valve counter-clockwise to gradually lower the vehicle to the ground. Once fully lowered, remove the floor jack and wheel chocks.

6. Техникалык тейлөө

6.1. Жалпы тейлөө

• Тазалоо: Keep the jack and jack stands clean. Wipe off any oil, grease, or dirt after each use.
• Майлоо: Periodically lubricate moving parts (e.g., pivot points, wheels) with light machine oil.
• Сактагыч: Store the jack in a fully lowered position in a clean, dry area. Store jack stands in a dry area.

6.2. Hydraulic Fluid Check and Refill (Floor Jack)

Check the hydraulic fluid level every three months or if the jack's performance degrades.

1. Position the jack on a level surface and fully lower it.
2. Locate and remove the oil filler plug (usually a rubber stopper).
3. The fluid level should be just below the filler hole. If low, add high-quality hydraulic jack oil. Do not use brake fluid or motor oil.
4. Толтургуч сайгычты алмаштырыңыз.
5. Purge any air from the system as described in Section 4.1.

7. Кыйынчылыктарды

8. Техникалык шарттар

• Модел: AT82001B-2
• Түрү: Hydraulic Floor Jack & Jack Stands Combo
• Floor Jack Capacity: 2 Ton (4,000 lb)
• Jack Stand Capacity: 2 Ton (4,000 lb) per pair
• Floor Jack Lift Range: Approximately 5-1/4" to 13-3/8" (13.3 cm to 34 cm)
• Jack Stand Adjustable Height: 10-13/16" to 16-9/16" (27.5 cm to 41.6 cm)
• Материал: Оор жүк ташуучу болот
• Түсү: Кара
• Элемент Салмагы: Болжол менен 31.7 фунт
• Product Dimensions (Floor Jack): Болжол менен 18 x 13.5 x 9.1 дюйм

Figure 6: Floor Jack Dimensions. This image illustrates the key measurements of the hydraulic floor jack, including its minimum and maximum lift height.

Figure 7: Jack Stand Dimensions. This image shows the adjustable height range of the jack stands.

9. Кепилдик жана колдоо

This Torin AT82001B-2 Hydraulic Floor Jack and Jack Stands Combo includes a limited 1-year manufacturer warranty.

For warranty claims, technical support, or inquiries regarding parts and service, please contact Torin customer service. Refer to the product packaging or the official Torin webакыркы байланыш маалыматы үчүн сайт.

Өндүрүүчү: Торин

UPC: 810104649759