TC Electronic JIMS 800 PREAMP Гитара педалы

1. Киришүү

The TC Electronic JIMS 800 PREAMP is a twin-channel guitar preamp pedal designed to deliver classic, guitar-driven rock tones. Utilizing advanced TC Ampworx component-based modeling technology, this compact pedal encapsulates the sound and feel of an iconic 80s guitar amplifier. It features independent channel controls, pre/post boost functionality, and dedicated outputs for DI and headphones, offering versatile usage for practice, recording, and live performance.

2. Коопсуздук маалыматы

• Always use a regulated 9V DC power supply with a center-negative polarity and a minimum current rating of 300mA. Incorrect power supplies can damage the unit and void the warranty.
• Do not expose the pedal to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the pedal to severe impacts.
• Do not attempt to open the enclosure or modify the internal circuitry. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the pedal during operation.

3. Пакеттин мазмуну

Your TC Electronic JIMS 800 PREAMP package should contain the following:

• JIMS 800 PREAMP Гитара педалы
• Ыкчам баштоо колдонмосу (эгер камтылган болсо)

Note: A power supply is not included and must be purchased separately.

4. Продукциянын өзгөчөлүктөрү

• Twin-Channel Preamp: Offers two distinct channels for versatile tonal options.
• Көз карандысыз каналды башкаруу: Each channel features dedicated controls for precise tone shaping.
• Pre/Post Boost: Provides an added gain boost that can be applied before or after the preamp бөлүм.
• Dedicated Outputs: Includes outputs for DI (Direct Injection) and headphones for flexible connectivity.
• Жогорку жыштыктагы кан агуу схемасы: Smooths out sharp tones for a more pleasant listening experience.
• Authentic Cab Simulation: Features precise convolution-based IR technology for a classic G12-65 4x12 cab speaker sound.
• Versatile Tonestack: Combines the iconic tone control layout of the original amp with modern versatility.
• Added Gain Power: A subtle additional gain boost on the second channel pushes your sound without compromising the original amp's feel.

5. Башкаруу элементтери жана байланыштар

Сүрөт 1: Алдыңкы панелдин башкаруу элементтери

• GAIN баскычы: Adjusts the input gain and distortion level of the selected channel.
• BOOST баскычы: Controls the level of the independent boost function.
• LEVEL баскычы: Sets the overall output volume of the pedal.
• BASS баскычы: Adjusts the low-frequency response of the tone.
• MID баскычы: Adjusts the mid-range frequency response of the tone.
• TREBLE баскычы: Adjusts the high-frequency response of the tone.
• BOOST бут өчүргүч: Activates or deactivates the boost function. An LED indicates its status.
• CHANNEL Footswitch: Switches between the two preamp channels. An LED indicates the active channel.
• ТЕЛЕФОНДОР уячасы: 3.5mm stereo output for headphones, featuring cab simulation.

Сүрөт 2: Арткы панелдик байланыштар

• IN Jack: 1/4" mono input for your guitar.
• OUT Jack: 1/4" mono output to your ampкөтөргүч же башка педалдар.
• DI Jack: XLR output for direct connection to a mixing desk or audio interface, with cab simulation.
• PRESENCE баскычы: Adjusts the high-frequency contour, adding clarity or bite.
• PRE/POST Switch: Determines whether the boost is applied before (PRE) or after (POST) the preamp бөлүм.
• 9V DC киргизүү: Power input for a 9V DC, center-negative power supply (300mA minimum).
• USB порт: USB 2.0 Type B port for firmware updates and potential future functionalities.

6. Орнотуу

1. Кубат туташуу: Connect a 9V DC, center-negative power supply (minimum 300mA) to the 9V DC input jack on the rear panel.
2. Гитара туташуу: Connect your guitar to the 'IN' jack on the rear panel using a standard 1/4" instrument cable.
3. Чыгуу туташуу:
   • Гитарага туташуу үчүн amplifier, connect the 'OUT' jack to your amp's input.
   • For direct recording or live sound, connect the 'DI' XLR output to a mixing console or audio interface. This output includes cab simulation.
   • For silent practice, connect headphones to the 'PHONES' 3.5mm stereo jack. This output also includes cab simulation.
4. Баштапкы жөндөөлөр: Before powering on, set all knobs (GAIN, BOOST, LEVEL, BASS, MID, TREBLE, PRESENCE) to their 12 o'clock (noon) position. Ensure the PRE/POST switch is set to your desired boost placement.

7. Иштөө нускамалары

7.1 Каналды алмаштыруу

басыңыз КАНАЛ footswitch to toggle between the two distinct preamp channels. The corresponding LED will illuminate to indicate the active channel.

7.2 Gain and Level Adjustment

• колдонуу АЛУУ knob to control the amount of overdrive and distortion for the selected channel. Higher settings will yield more saturated tones.
• тууралаңыз LEVEL knob to set the overall output volume of the pedal. Ensure the output level is appropriate for your ampөмүр же жаздыруучу түзмөк.

7.3 Tone Shaping (EQ)

The JIMS 800 PREAMP features a versatile 3-band EQ:

• Бас: Controls the low-end frequencies, adding warmth or tightness.
• ОРТО: Adjusts the mid-range frequencies, affecting the presence and punch of your tone.
• ҮЧТҮҮ: Controls the high-end frequencies, adding brightness or smoothness.
• КАТЫШУУ: (Rear Panel) Fine-tunes the very high frequencies, adding sparkle or cutting harshness.

7.4 Boost функциясы

• колдонуу BOOST knob to set the desired amount of boost.
• басыңыз BOOST footswitch to engage or disengage the boost.
• The АЛДЫН АЛА БИЛДИРҮҮ switch on the rear panel determines where the boost is applied in the signal chain. 'PRE' applies the boost before the preamp, көбөйтүүasing saturation. 'POST' applies the boost after the preamp, primarily increasinг көлөмү.

7.5 Cab Simulation

The DI and PHONES outputs feature an authentic G12-65 4x12 cab simulation, providing a studio-quality speaker cabinet sound directly from the pedal. This is ideal for recording or connecting directly to a PA system without needing a physical amplifier or cabinet.

8. Техникалык тейлөө

• Тазалоо: Use a soft, dry cloth to clean the pedal's exterior. Do not use abrasive cleaners or solvents.
• Сактагыч: Педальды көпкө чейин колдонбогондо, аны салкын, кургак жерде, күндүн түз нурунан жана өтө жогорку температурадан алыс сактаңыз.
• Программалык камсыздоонун жаңыртуулары: TC электрондук капкагын мезгил-мезгили менен текшерип туруңуз website for any available firmware updates for your JIMS 800 PREAMP via the USB port.

9. Кыйынчылыктарды

• Үн жок:
  • Электр кубаты туура туташтырылганын жана иштешин текшериңиз.
  • Check all instrument cables for proper connection and integrity.
  • Verify the LEVEL knob is not set to minimum.
  • If using DI or headphones, ensure the receiving device (mixer, interface, headphones) is properly connected and its volume is up.
• Poor Tone/Unwanted Noise:
  • Check your guitar's pickups and wiring.
  • Experiment with the GAIN and EQ (BASS, MID, TREBLE, PRESENCE) settings.
  • Ensure you are using a clean, regulated power supply. Unregulated or noisy power supplies can introduce hum.
  • Туташуулардын бузулушун жокко чыгаруу үчүн ар кандай кабелдер менен сынап көрүңүз.
• Boost Function Not Working:
  • Ensure the BOOST knob is turned up from minimum.
  • Check the BOOST footswitch LED to confirm it's engaged.

10. Техникалык шарттар

11. Кепилдик жана колдоо

TC Electronic products are designed for reliability and performance. For information regarding warranty coverage, technical support, and service, please visit the official TC Electronic webсайтка же түздөн-түз кардарларды колдоо менен байланышыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Official TC Electronic Webсайт: www.tcelectronic.com