NEWTRY Automatic Chicken Coop Door Opener

Introduction

Сатып алганыңыз үчүн рахматasing the NEWTRY Automatic Chicken Coop Door Opener. This device is designed to provide a convenient and secure solution for managing your chicken coop, featuring automatic opening and closing based on time or light conditions, an anti-pinch safety mechanism, and solar power capabilities. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Image: The NEWTRY Automatic Chicken Coop Door installed on a coop, showing chickens using a ramp to enter and exit. The door features adjustable opening angles.

Коопсуздук маалыматы

• Always ensure the power is disconnected before performing any maintenance or installation.
• Keep children and pets away from the moving door to prevent injury.
• Do not attempt to modify the device. Unauthorized modifications may cause damage or injury and void the warranty.
• Ensure the solar panel is securely mounted and positioned for optimal sunlight exposure.
• Use only the specified batteries and power adapter.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Automatic Chicken Coop Door Unit
• Күн панели (10 Вт)
• Алыстан башкаруу
• 4 x AA Rechargeable Batteries (780mAh NiMH)
• Батарея заряддагыч
• Кубаттуу адаптер
• Монтаждоочу жабдык
• User Manual

Image: A visual representation of all components included in the package, such as the door unit, solar panel, remote control, batteries, charger, and adapter.

Жайгашуу

1. Installation of the Door Unit

1. Choose a suitable location on your chicken coop for the door. Ensure there is enough space for the door to pivot open and close freely.
2. Mark and cut an opening in the coop wall that matches the dimensions of the door frame (approximately 12.4 x 15.75 inches).
3. Secure the door unit to the coop wall using the provided mounting hardware. Ensure it is level and firmly attached.

Image: The automatic chicken coop door installed on a wooden coop, highlighting its dimensions (26cm door height, 24cm door width, 40cm total height, 31.5cm total width).

2. Электр кубатын кошуу

The door unit supports three power supply methods:

• Күн кубаты: Connect the solar panel cable to the designated port on the door unit. Mount the solar panel in a location that receives maximum direct sunlight throughout the day.
• Аккумуляторлор: Insert the 4 included AA NiMH rechargeable batteries into the battery compartment.
• Кубаттуу адаптер: Connect the power adapter to the door unit and a standard electrical outlet. This can be used for continuous power or to charge the batteries.

Image: A diagram illustrating the three power supply options: solar panel, rechargeable batteries with charger, and direct power adapter connection.

3. Initial Power-Up and Angle Setting

After connecting a power source, the display will light up. To set the door's opening angle:

1. Completely disconnect the power from the unit.
2. Reconnect the power. The display will show the current angle setting.
3. Use the up/down arrows to adjust the angle (e.g., 30° to 180°).
4. Press the 'Settings' button to confirm.

Video: This video demonstrates how to set the opening angle and local time on the control panel, as well as how to select different operating modes.

Операция

1. Control Panel Overview

The control panel features a display and several buttons for settings and manual control:

• Орнотуулар баскычы: Жөндөөлөрдү киргизүү жана ырастоо үчүн колдонулат.
• Өйдө/төмөн жебелер: Used to adjust values or navigate options.
• Сыноо баскычы: Manually opens or closes the door for testing.
• Үйрөнүү баскычы: Used for pairing the remote control.

2. Setting Local Time

Press the 'Settings' button until the time display flashes. Use the up/down arrows to set the current local time (hour and minute), then press 'Settings' to confirm each value.

3. Setting Operating Modes

The door offers four operating modes:

• T-T Mode (Time-Time): The door opens and closes at specific set times.
• L-L Mode (Light-Light): The door opens and closes based on detected light levels (lumen value).
• T-L Mode (Time-Light): The door opens at a set time and closes based on light levels.
• L-T Mode (Light-Time): The door opens based on light levels and closes at a set time.

To select a mode, press the 'Settings' button until the mode indicator flashes. Use the up/down arrows to cycle through modes, then press 'Settings' to confirm. Follow the on-screen prompts to set the specific open/close times or lumen values for your chosen mode.

Image: A detailed diagram explaining the four different operating modes (Time-Time, Light-Light, Time-Light, Light-Time) and how to set them.

4. Алыстан башкарууну колдонуу

The remote control allows you to manually open or close the door from up to 40 meters (131 feet) away. To pair the remote control, press the 'Learn' button on the door unit and follow the instructions.

Image: The remote control and the door unit's control panel, highlighting the 'Test' and 'Learn' buttons for manual and remote operation.

5. Anti-Pinch Safety Feature

The door is equipped with a sensitive infrared sensor. If an obstruction (like a chicken) is detected while the door is closing, it will stop and reopen. After a 2-minute delay, it will attempt to close again. This ensures the safety of your poultry.

Image: A sequence illustrating the anti-pinch mechanism: the door closes, stops upon sensing an object, reopens, waits 2 minutes, and then attempts to close again.

Video: This video demonstrates the solar panel connection, battery charging, light sensor functionality, IP45 waterproof rating, operation in extreme temperatures, and the anti-pinch safety feature.

Техникалык тейлөө

• Тазалоо: Regularly clean the door unit, especially the light sensor and the moving parts, to ensure smooth operation. Use a soft, damp кездеме. Катуу химиялык заттарды колдонбоңуз.
• Күн панели: Keep the solar panel clean from dust, dirt, and debris to maintain optimal charging efficiency.
• Батареялар: The included NiMH batteries are rechargeable. If using the solar panel, they will recharge automatically. If using the power adapter, ensure it is connected to charge the batteries periodically. Replace batteries if they no longer hold a charge.
• Байланыштары: Кабелдик туташуулар коопсуз жана бузулбашы үчүн мезгил-мезгили менен текшерип туруңуз.

Проблемаларды чечүү

• Door not opening/closing:
  • Check power supply: Ensure batteries are charged or the power adapter/solar panel is connected and functioning.
  • Verify settings: Confirm that the time or light sensor settings are correctly configured for the desired operation.
  • Check for obstructions: Clear any debris or obstructions in the door's path.
• Пульт иштебей жатат:
  • Пульттун батарейкалары түгөнүп калбасын текшериңиз.
  • Re-pair the remote control with the door unit using the 'Learn' button.
  • Check the distance: The remote has a range of approximately 40 meters.
• Inaccurate light sensor operation:
  • Clean the light sensor on the door unit.
  • Adjust the lumen value setting to match your desired light conditions for opening/closing.

Техникалык шарттар

Кепилдик жана колдоо

NEWTRY products are designed for durability and performance. For specific warranty details, please refer to the warranty card included in your package or visit the official NEWTRY website. If you encounter any issues or require technical assistance, please contact NEWTRY customer support through the contact information provided on our webсайт же сатып алуу платформаңыз.