RECOIL REQ7 7-Band Car Audio Equalizer User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL REQ7 7-Band Car Audio Parametric Graphic Equalizer. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

2. Негизги өзгөчөлүктөрү

• 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer.
• Fully Adjustable -12 dB to +12 dB EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz and 16kHz).
• 2 channels of speaker level inputs & 6 channels of RCA outputs (front, rear, sub).
• Auxiliary stereo RCA input & front panel auxiliary stereo input.
• Separate level controls on front of EQ for convenience (master, sub, front/rear fader, main/auxiliary inputs).
• Exceptional 83 dB signal-to-noise performance.
• Extended frequency response from 20 Hz to 30 kHz.
• Жогорку Voltage (Max Output Voltage 7V) Premium Tiffany RCA connectors.
• ISO mounting holes and removable trim ring for custom installation.
• Includes installation brackets and hardware.

3. Коопсуздук маалыматы

Орнотуу жана эксплуатациялоо учурунда ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Электр иштерин жасоодон мурун унаанын терс аккумулятор терминалын ажыратыңыз.
• Бардык зымдар туура орнотулганын жана бузулууларды же кыска туташууларды болтурбоо үчүн бекитилгенин текшериңиз.
• Do not operate the unit in wet conditions or expose it to excessive moisture.
• Орнотуу кадамдарына ишене албасаңыз, профессионал унаа аудио орнотуучусуна кайрылыңыз.
• Avoid adjusting audio settings while driving to maintain focus on the road.

4. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• RECOIL REQ7 Equalizer Unit
• Орнотуу кашаа
• Монтаждоочу жабдыктар (бурамалар ж.б.)
• Электр/жерге туташтыруучу зымдардын шнуру
• Колдонуучунун Колдонмосу (бул документ)

5. Продукт бүтүп калдыview

5.1 Алдыңкы панелдин башкаруу элементтери

Image: Front panel of the RECOIL REQ7 equalizer, showing the seven EQ band controls, master volume, subwoofer level, fader, and auxiliary input.

• КОШУМЧА ДЕҢГЭЭЛ: Adjusts the output level of the subwoofer channel.
• Көлөмү: Master volume control for all channels.
• AUX S/W: Switch to select between Main and Auxiliary input.
• AUX IN: 3.5mm stereo jack for auxiliary audio input.
• FADER: Balances the audio output between front and rear channels.
• EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz): Seven individual rotary controls to adjust the gain (-12dB to +12dB) for specific frequency ranges.

5.2 Арткы панелдин туташуулары

Image: Rear panel of the RECOIL REQ7 equalizer, displaying RCA inputs (Main In, Aux In, Hi Input), RCA outputs (Front Out, Rear Out, Sub Out), and power connection.

• SUB OUT (L/R): RCA outputs for connecting to a subwoofer ampөмүрлүү.
• AUX IN (сол/оң): RCA inputs for auxiliary audio sources.
• HI INPUT (L/R): Speaker level inputs for connecting to a factory head unit without RCA outputs.
• MAIN IN (L/R): RCA inputs for the primary audio source (e.g., head unit).
• REAR OUT (L/R): RCA outputs for connecting to a rear channel ampөмүрлүү.
• FRONT OUT (L/R): RCA outputs for connecting to a front channel ampөмүрлүү.
• КҮЧ: Connection terminal for power, ground, and remote turn-on wires.
• LOW PASS FREQUENCY Switch (90Hz/60Hz): Selects the low-pass crossover frequency for the subwoofer output.

6. Орнотуу

Proper installation is crucial for optimal performance. If you are not comfortable with car audio wiring, seek professional assistance.

6.1 Монтаждоо

1. Choose a suitable mounting location that is dry, well-ventilated, and accessible for adjustments. The REQ7 is a 1/2 DIN size, allowing for flexible placement.
2. Use the provided mounting brackets and hardware to secure the equalizer. Ensure the unit is firmly attached to prevent vibration.
3. The removable trim ring can be used for custom installations to achieve a flush look.

6.2 Зымдарды туташтыруу

Refer to the diagram below for typical wiring connections.

Сүрөт: жогорудан төмөнгө view of the RECOIL REQ7 equalizer, illustrating the various input and output connections for a car audio system.

• Power (RED wire): Connect to a fused +12V constant power source from the vehicle's battery.
• Ground (BLACK wire): Connect to a clean, solid chassis ground point in the vehicle. Ensure good metal-to-metal contact.
• Remote (BLUE wire): Connect to the remote turn-on output of your head unit or other switched +12V source. This turns the equalizer on/off with your audio system.
• Аудио киргизүү каражаттары:
  • RCA Inputs (MAIN IN / AUX IN): RCA кабелдерин башкы бирдигиңизден туташтырыңызamp outputs to the MAIN IN. Use AUX IN for additional RCA sources.
  • High Level Inputs (HI INPUT): If your head unit does not have RCA outputs, connect the speaker wires directly to the HI INPUT terminals.
• Audio Outputs (FRONT OUT / REAR OUT / SUB OUT): Connect RCA cables from these outputs to the corresponding inputs on your external ampаман калгандар.

7. Иштөө нускамалары

7.1 Баштапкы кубаттуулук

1. After completing all wiring, reconnect the vehicle's negative battery terminal.
2. Turn on your head unit. The REQ7 should power on automatically via the remote wire.
3. Start with all EQ bands at their center (flat) position, master volume low, and subwoofer level low.

7.2 Аудио жөндөөлөрүн тууралоо

• Булак тандоо: колдонуу AUX S/W switch to toggle between the MAIN IN (RCA from head unit) and AUX IN (front panel 3.5mm or rear RCA auxiliary inputs).
• Негизги том: Акырындык менен көбөйтүү VOLUME баскычын ыңгайлуу угуу деңгээлине коюңуз.
• Сабвуфердин деңгээли: тууралаңыз SUB LEEVEL knob to blend the subwoofer output with the main speakers.
• FADER Control: колдонуу FADER knob to balance the sound between the front and rear speakers.
• Теңдөө: Жеке адамды тууралаңыз EQ Band controls (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz) to fine-tune the audio frequency response to your preference. Increase (+) to boost a frequency, decrease (-) to cut it.
• Төмөн өтүү чыпкасы: колдонуу ТӨМӨН ӨТҮҮ Жыштыгы switch on the rear panel to select the desired crossover point (60Hz or 90Hz) for the subwoofer output. This ensures only low frequencies are sent to the subwoofer.

8. Техникалык тейлөө

• Түзмөктү таза жана чаңсыз кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөк колдонуңуз.
• Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
• Ensure all connections remain secure over time. Periodically check wiring for any signs of wear or corrosion.

9. Кыйынчылыктарды

10. Техникалык шарттар

11. Кепилдик жана колдоо

RECOIL products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RECOIL webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

For further assistance, you may contact RECOIL customer support through their official channels.