1. Киришүү
This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your CREWORKS 10L Multi-Slot Ultrasonic Cleaner. This device utilizes ultrasonic waves to clean various items, including jewelry, dental appliances, glasses, and small parts, by generating cavitation bubbles in a cleaning solution.
2. Коопсуздук маалыматы
WARNING: Read all safety instructions before use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the unit is unplugged before filling or emptying the tank, or performing any maintenance.
- Тазалоочу каражатты резервуарда суюктук жок болсо иштетпеңиз.
- Негизги блокту сууга же башка суюктуктарга салбаңыз.
- Агрегатты балдардан алыс кармаңыз.
- Use only appropriate cleaning solutions. Avoid flammable, corrosive, or abrasive solutions.
- Ensure proper ventilation when using cleaning solutions that may emit fumes.
- Do not touch the tank or solution during operation, especially if heated, as temperatures can be high.
- If the unit shows signs of damage, discontinue use immediately and contact customer support.

3. Продукциянын компоненттери
Your CREWORKS 10L Multi-Slot Ultrasonic Cleaner includes the following main components:
- Негизги блок: Houses the ultrasonic transducers, heating element, and control panel.
- Дат баспас болоттон жасалган танк: The primary cleaning reservoir, constructed from 304 stainless steel for durability and corrosion resistance.
- Капкак: Covers the tank during operation to reduce noise and prevent splashing.
- Башкаруу панели: Features rotary knobs for setting temperature and time.
- Дренаж клапаны: Located on the side for convenient emptying of the tank.
- Cleaning Baskets: Two multi-slot baskets designed to hold items during cleaning, preventing them from resting directly on the tank bottom.

4. Орнотуу
- Пакеттен чыгаруу: УЗИ тазалагычты жана бардык аксессуарларды таңгактан этияттык менен алып салыңыз. Бузулууларды текшериңиз.
- Жайгашкан жери: Place the unit on a stable, level, and heat-resistant surface. Ensure there is adequate ventilation around the unit. Keep it away from water sources.
- Кубат туташуу: Ensure the power switch is in the OFF position. Plug the power cord into a grounded electrical outlet.
- Танкты толтуруу: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill.
- Себеттерди киргизүү: Place the cleaning baskets into the tank.
5. Иштөө нускамалары
Follow these steps to operate your ultrasonic cleaner:
- Буюмдарды даярдоо: Place the items to be cleaned into the cleaning baskets. Ensure items are not overcrowded and are fully submerged in the cleaning solution.
- Жабуу: Close the lid to reduce noise and prevent splashing.
- Температураны коюу: Use the TEMPERATURE control knob to set the desired cleaning solution temperature. The range is typically between 70°F and 175°F (20°C to 80°C). Allow time for the solution to heat up if a higher temperature is selected.
- Убакытты коюу: Use the TIME control knob to set the desired cleaning duration, up to 30 minutes.
- Тазалоону баштоо: The unit will begin the ultrasonic cleaning process once the timer is set. The heating indicator will illuminate if heating is active, and the cleaning indicator will show when ultrasonic action is occurring.
- Циклдин аягы: Таймер нөлгө жеткенде бирдик автоматтык түрдө токтойт.
- Элементтерди алып салуу: Carefully open the lid. Using the basket handles, lift the baskets out of the tank. Allow excess liquid to drain back into the tank.
- Чайноо жана кургатуу: Rinse the cleaned items thoroughly with clean water and dry them completely.



6. Техникалык тейлөө
Proper maintenance ensures the longevity and performance of your ultrasonic cleaner.
- Резервуарды төгүү: After each use, or when the solution is dirty, turn off and unplug the unit. Open the drain valve to empty the tank. Dispose of the cleaning solution according to local regulations.
- Танкты тазалоо: Дат баспас болоттон жасалган бакты таза суу менен чайкаңыз. Аппараттын ичин жана сыртын жумшак, d менен сүртүңүзamp кездеме. Абразивдүү тазалагычтарды же жуугучтарды колдонбоңуз.
- Сактагыч: Store the unit in a cool, dry place with the lid slightly ajar to allow for air circulation.
- Үзгүлтүксүз текшерүү: Periodically check the power cord for any damage. Ensure the rubber feet are intact for stable operation.

7. Кыйынчылыктарды
If you encounter issues with your ultrasonic cleaner, refer to the following common problems and solutions:
- Түзмөк күйбөйт:
- Электр шнурунун иштеген розеткага бекем сайылганын текшериңиз.
- Кубат өчүргүч ON абалында экенин текшериңиз.
- Автоматтык өчүргүч өчүп калбаганын текшериңиз.
- No Ultrasonic Action (No Buzzing Sound):
- Ensure the tank is filled with liquid above the MIN line.
- Check if the timer is set and the cleaning indicator is on.
- The unit may have a safety cutoff if overheated; allow it to cool down.
- Жылытуу элементи иштебей жатат:
- Verify the temperature knob is set to a desired temperature and the heating indicator is on.
- Allow sufficient time for the solution to reach the set temperature.
- Начар тазалоо натыйжалары:
- Ensure the cleaning solution is appropriate for the items and type of dirt.
- Тазалоо убактысын же температурасын көбөйтүңүз (сунушталган чектерде).
- Replace old or dirty cleaning solution.
- Ensure items are not touching the bottom of the tank directly; use the baskets.
Бул кадамдар маселени чечпесе, кардарларды колдоо кызматына кайрылыңыз.
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | B0CNGFCNQK |
| Танк көлөмү | 10 л (2.6 гал.) |
| УЗИ күч | 240 Вт |
| Жылытуу күчү | 200 Вт |
| УЗИ жыштыгы | 40 кГц |
| Температура диапазону | 70-175°F (20-80°C) |
| Таймер диапазону | 1-30 мүнөт |
| Танк материалы | 304 Дат баспас болот |
| Жалпы өлчөмдөр | 13.1 x 10.9 x 10.8 дюйм |
| Танктын өлчөмдөрү | 11.7 x 9.3 x 5.9 дюйм |
| Slot өлчөмдөрү | 3.3 x 3 дюйм |

9. Кепилдик жана колдоо
CREWORKS is committed to providing quality products and customer satisfaction.
- Кепилдик: This product comes with a 1-year promise, covering manufacturing defects and ensuring reliable operation.
- Кардарларды тейлөө: For any questions, technical assistance, or warranty claims, please contact CREWORKS customer service. Support is available 24/7. Refer to your purchase documentation or the official CREWORKS webбайланыш маалыматы үчүн сайт.
