Продукт бүттүview
This manual provides detailed instructions for the installation, operation, and maintenance of the Genuine Mazda Side Seat (L) Rear Buttk, part number G06B57550C68. This component is designed as a genuine replacement part for specific Mazda models, including Attensa, Capella, and MAZDA6. Please read this manual thoroughly before attempting installation or use to ensure proper function and safety.
Продукт сүрөтү
Image of the Mazda G06B57550C68 Side Seat (L) Rear Buttk. The image displays the Mazda brand name and the part number G06B57550C68, indicating it is a genuine Mazda replacement part.
Орнотуу жана орнотуу
The Mazda Side Seat (L) Rear Buttk (G06B57550C68) requires assembly and professional installation is recommended. Ensure you have the necessary tools and safety equipment before proceeding.
- Даярдоо: Park the vehicle on a level surface and engage the parking brake. Turn off the engine and disconnect the negative terminal of the vehicle's battery to prevent electrical hazards.
- Мүмкүнчүлүк: Carefully remove any existing seat components or trim panels that obstruct access to the installation area for the rear side seat. Refer to your vehicle's specific service manual for precise instructions on trim removal.
- Монтаждоо: Align the new Side Seat (L) Rear Buttk with the designated mounting points in the vehicle. Secure the component using the appropriate fasteners (not included, typically reused from original part or specified by Mazda). Ensure all bolts are tightened to the manufacturer's torque specifications.
- Байланыштары: If applicable, connect any electrical harnesses or seatbelt anchors to the new component. Ensure all connections are secure and properly routed.
- Кайра чогултуу: Reinstall any removed trim panels or seat components. Reconnect the vehicle's battery.
- Текшерүү: Test the functionality of the newly installed seat component, including seatbelt operation and any integrated features, before driving the vehicle.
Эскертүү: This part is designed for specific Mazda models: Attensa, Capella, and MAZDA6. Verify compatibility with your vehicle's VIN before installation.
Иштөө нускамалары
As a fixed seat component, the Mazda Side Seat (L) Rear Buttk does not have active operational controls. Its primary function is to provide structural support and seating for passengers. Ensure that seatbelts are properly fastened and adjusted for all occupants using this seat.
- Passenger Seating: This component is designed for one passenger. Ensure the passenger is seated correctly and comfortably.
- Seatbelt Usage: Always ensure that the vehicle's seatbelt is properly routed and buckled when a passenger is occupying this seat.
- Folding/Adjustments: If your vehicle's original seat had folding or reclining features, ensure the new component integrates correctly with these mechanisms. Refer to your vehicle's owner's manual for specific seat adjustment instructions.
Техникалык тейлөө жана кам көрүү
Proper maintenance will extend the lifespan of your Mazda Side Seat (L) Rear Buttk and ensure continued safety and comfort.
- Тазалоо: Regularly clean the seat surface with a soft, damp cloth and a mild automotive interior cleaner. Avoid harsh chemicals or abrasive materials that could damage the fabric or finish.
- Текшерүү: Periodically inspect the seat for any signs of wear, tear, loose stitching, or damage to the frame or mounting points. Check that all fasteners remain tight.
- Төгүлүүлөр: Clean spills immediately to prevent staining. Blot liquids with a clean cloth and follow with appropriate cleaning agents for the seat material.
- Ашыкча жүктөөдөн качыңыз: Do not place excessive weight on the seat or use it for purposes other than passenger seating.
Проблемаларды чечүү
This section addresses common issues you might encounter with the Mazda Side Seat (L) Rear Buttk.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Seat feels loose or wobbly after installation. | Монтаждоо болттору жетишерлик бекемделген эмес. | Re-tighten all mounting bolts to the vehicle manufacturer's specified torque. If the issue persists, inspect mounting points for damage. |
| Difficulty with seatbelt latching or retraction. | Seatbelt mechanism obstructed or misaligned during installation. | Inspect the seatbelt path and ensure no fabric or components are obstructing its operation. Verify the seatbelt anchor is correctly installed. |
| Unusual noises (squeaks, rattles) from the seat. | Loose fasteners or improper fitment. | Check all fasteners for tightness. Ensure all trim pieces are securely snapped into place. If noises persist, professional inspection may be required. |
If you encounter issues not listed here or if solutions do not resolve the problem, it is recommended to consult a certified Mazda service technician.
Техникалык шарттар
| Өндүрүүчү | Mazda |
| Бренд | Mazda |
| Модел | Seat (Side Seat (L) Rear Buttk) |
| Продукциянын өлчөмдөрү | 40 x 30 x 15 см |
| Элемент моделинин номери | G06B57550C68 |
| Өндүрүүчү бөлүгүнүн номери | G06B57550C68 |
| Ассамблея талап кылынат | Ооба |
| Элемент Салмагы | 8 кг |
| ASIN | B0CNGFVHS8 |
| Дата биринчи жеткиликтүү | 22-жылдын 2023-ноябры |
Кепилдик жана колдоо
As a genuine Mazda part, this component is typically covered by Mazda's standard parts warranty. Please refer to your original purchase documentation or contact your authorized Mazda dealer for specific warranty terms and conditions, as these may vary by region and purchase date.
For technical support, installation assistance, or to report any issues with this genuine Mazda part, please contact your local authorized Mazda service center or visit the official Mazda webкардарларды тейлөө байланыш маалыматы үчүн сайт.
- Official Mazda Webсайт: www.mazda.com (Please select your region for localized support)
- Authorized Mazda Dealer: Locate your nearest dealer for professional assistance.