Jesverty PS-30SWX DC Regulated Bench Power Supply User Manual

1. Киришүү

The Jesverty PS-30SWX is a regulated DC power supply designed to convert AC power to a stable DC voltage. It is suitable for powering various 13.8V equipment, including CB, HAM, GMRS, and LMR two-way radios, and scanners. This unit features an adjustable output voltage from 5V to 15V DC and provides a maximum continuous current of 30A.

This manual provides essential information for the safe and efficient operation of your PS-30SWX power supply. Please read it thoroughly before use and retain it for future reference.

2. Коопсуздук чаралары

To ensure safe operation and prevent damage to the unit or connected devices, observe the following precautions:

• Агрегатты жамгырга же нымдуулукка дуушар кылбаңыз.
• в ачпагылаasing; ичинде колдонуучу тейлей турган тетиктер жок. Бардык тейлөө иштерин квалификациялуу адистерге тапшырыңыз.
• Туура желдетүүнү камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
• Connect the unit to a grounded 115V AC outlet.
• Чыгуу көлөмүн текшериңизtage and current settings are appropriate for your connected device before powering it on.
• The unit is equipped with overheat, short-circuit, over-voltage, over-current, and overload protection.

3. Продукттун өзгөчөлүктөрү жана компоненттери

Familiarize yourself with the various parts of your PS-30SWX power supply:

1-сүрөт: Front and Rear Panel Components. This image displays the Jesverty PS-30SWX power supply with labels pointing to its various components, including the LCD display, power switch, voltage control knob, output terminals, and cooling fan.

Алдыңкы панели:

• LCD дисплей: Чыгарылыштын көлөмүн көрсөтөтtage жана ток.
• Күйгүзүү көрсөткүчү: Түзмөк күйгүзүлгөндө күйөт.
• Ашыкча жүктөө көрсөткүчү: Illuminates if an overload condition is detected.
• Callsign Setting Button: Used to store a call number in memory.
• Тtage Control Knob: Чыгуу көлөмүн тууралайтtage (5V-15V).
• Кубат которгучу: Аппаратты КҮЙГҮЗҮП/ӨЧҮРӨТ.
• Snap-in Terminals: Provides up to 6A output.
• Cigar-lighter Socket: Provides up to 10A output.

Арткы Panel:

• Phone Jack (SPKR 8Ω): Connects an external speaker for radio signal audio.
• Output Terminals (5-Way Binding Posts): Universal hardwired screw-type connection for up to 30A output.
• Муздатуу желдеткич: Temperature-regulated fan for heat dissipation.
• AC киргизүү розеткасы: AC кубат шнурын туташтыруу үчүн.

4. Орнотуу

Follow these steps to set up your PS-30SWX power supply:

1. Жайгашкан жери: Place the power supply on a stable, flat surface, ensuring adequate space around the unit for ventilation. Do not place it near heat sources or in direct sunlight.
2. AC кубат туташуу: Connect the supplied AC power cord to the AC Input Socket on the rear panel of the power supply and then plug it into a standard 115V AC wall outlet.
3. DC түзмөк туташуу: Connect your DC-powered device to the power supply using one of the following methods:
   • Cigar-lighter Socket: For devices requiring up to 10A. Open the cover and insert the cigar-lighter plug.
   • Snap-in Terminals: For devices requiring up to 6A. Open the cover and connect the wires.
   • Output Terminals (Binding Posts): For devices requiring up to 30A. Connect the positive (+) and negative (-) wires from your device to the corresponding binding posts on the rear panel. Ensure connections are secure.
   

   2-сүрөт: Cigar-lighter socket access. This image shows the front panel of the power supply with the cover for the cigar-lighter socket opened, revealing the socket.

   

   3-сүрөт: Rear panel connections. This image highlights the rear panel of the power supply, showing the 5-way binding posts for high-current output and the AC input socket.
4. Баштапкы томtage Орнотуу: Before turning on the power supply, rotate the Voltage Control Knob to the desired output voltage, typically 13.8V for most amateur radio equipment.

5. Иштөө нускамалары

Once the power supply is set up, follow these steps for operation:

1. Күйгүзүү: Flip the Power Switch to the 'ON' position. The LCD display will illuminate, showing the current output voltagд жана amperage. The Power-on Indicator will also light up.
2. Жөндөө Voltage: Voltage Control Knob clockwise to increase the output voltage and counter-clockwise to decrease it. The LCD display will show the adjusted voltage in real-time. The adjustable range is 5V to 15V DC.
3. Callsign Storage: To store a callsign, press the Callsign Setting Button. Follow the on-screen prompts or refer to the specific instructions for this feature if available in a separate guide.
4. Audio Speaker Function: If your radio signal includes audio, connect an 8Ω speaker to the Phone Jack (SPKR 8Ω) on the rear panel to transfer the radio signal into sound.
5. Мониторинг: Continuously monitor the LCD display for voltage and current readings during operation. If the Overload Indicator illuminates, reduce the load or check for short circuits.
6. Өчүрүү: When finished, turn off your connected device first, then flip the Power Switch on the power supply to the 'OFF' position.

4-сүрөт: Accurate Back-lit LCD Display. This image shows a close-up of the power supply's front panel, highlighting the clear, back-lit LCD display showing voltage жана учурдагы окуулар.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө электр менен камсыздооңуздун узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылууга жардам берет:

• Тазалоо: Disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Вентиляция: Periodically check that the ventilation openings and the cooling fan are free from dust and obstructions. Blocked vents can lead to overheating.
• Байланыштары: Ensure all input and output connections remain secure. Loose connections can cause intermittent power or damage.

7. Кыйынчылыктарды

If you encounter issues with your PS-30SWX power supply, refer to the following common troubleshooting steps:

• Кубат жок:
  • Check if the AC power cord is securely plugged into both the unit and the wall outlet.
  • Ensure the Power Switch is in the 'ON' position.
  • Башка аспапка сайып, розетка иштеп жатканын текшериңиз.
• Overload Indicator On:
  • The connected device may be drawing too much current. Disconnect the device and check its power requirements.
  • Check for any short circuits in the wiring to your connected device.
  • Электр энергиясы менен камсыздоонун жүгүн азайтыңыз.
• Туура эмес чыгаруу томtage:
  • Томду тууралаңызtage Control Knob to the desired voltage.
  • Ensure the LCD display is functioning correctly.
• No Audio from Speaker Jack:
  • Verify the speaker is correctly connected to the SPKR 8Ω jack.
  • Ensure the connected radio is outputting audio.
  • Check the speaker's functionality with another audio source.

If the problem persists after attempting these steps, please contact Jesverty customer support.

8. Техникалык шарттар

Key technical specifications for the Jesverty PS-30SWX power supply:

5-сүрөт: Dimensions and Weight. This image illustrates the physical dimensions (width, length, height) and weight of the PS-30SWX power supply.

9. Кепилдик жана колдоо

Jesverty provides lifetime technical support for the PS-30SWX power supply. If you have any questions, require assistance, or are not satisfied with your product, please do not hesitate to contact us. Our customer service team is available to help.

For support, please refer to the contact information provided with your product packaging or visit the official Jesverty webсайт.