1. Киришүү
Welcome to the Keychron Q2 Max user manual. This guide provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new 65% compact custom mechanical gaming keyboard kit. The Keychron Q2 Max is designed for enthusiasts seeking a premium typing experience with extensive customization options and versatile connectivity.
The Q2 Max features a full metal body, advanced 2.4 GHz wireless, Bluetooth 5.1, and wired USB-C connectivity. It supports QMK/VIA for comprehensive key remapping and macro programming, and includes multi-layered acoustic foams and a double-gasket design for an enhanced typing feel.
Please read this manual thoroughly before using your keyboard to ensure proper setup and optimal performance.
2. Пакеттин мазмуну
The Keychron Q2 Max Barebone Keyboard Kit includes the following components:
- 1x Keychron Q2 Max Keyboard Kit (Barebone Version - without keycaps & switches)
- 1x Алюминий куту
- 1x PCB (Printed Circuit Board)
- 1x PC Plate
- 1x Үндү жутуучу көбүк
- 1x IXPE көбүгү
- 1x PET тасмасы
- 1x Latex Bottom Pad
- 1x Төмөнкү корпустун акустикалык көбүгү
- 1x Bottom Case PET тасмасы
- 14x Gaskets (10 installed, 4 in box)
- 4 sets x PCB Stabilizers
- 1x Type-C - Type-C кабели
- 1x Type-A to Type-C адаптер
- Алуучу үчүн 1x узартуу адаптери
- 1x Type-A 2.4 ГГц кабылдагыч
- 1x Баскыч капкагы жана которгуч
- 1x Screwdriver
- 1x Hex ачкычы
3. Орнотуу
3.1. Assembling Your Keyboard (Barebone Kit)
Since the Q2 Max is a barebone kit, you will need to install your preferred switches and keycaps. Follow these steps:
- Коммутаторлорду даярдоо: Ensure your mechanical switches are compatible with hot-swappable PCBs (3-pin or 5-pin).
- Которгучтарды орнотуу: Align the pins of each switch with the holes on the PCB. Gently press down until the switch clicks into place. Ensure the switch is fully seated and straight.
- Keycaps орнотуу: Align the keycap stem with the cross-shaped stem on the switch. Press firmly until the keycap is securely attached.
3.2. Баштапкы байланыш
The Keychron Q2 Max offers three connectivity modes: 2.4 GHz wireless, Bluetooth 5.1, and wired USB-C.
- Зымдуу туташуу: Connect the provided USB-C to USB-C cable (or USB-A to USB-C with adapter) from your keyboard to your computer's USB port. The keyboard will power on automatically.
- 2.4 ГГц зымсыз байланыш: Insert the 2.4 GHz receiver into an available USB-A port on your computer. Slide the mode switch on the keyboard to the 2.4G position. The keyboard should connect automatically.
- Bluetooth байланыш: Slide the mode switch on the keyboard to the BT position. Press and hold fn+1 (же fn+2 / fn+3) for 4 seconds to enter pairing mode. The backlight will flash rapidly. On your device, search for "Keychron Q2 Max" in Bluetooth settings and connect.
3.3. Системанын шайкештигин которгуч
The Q2 Max has a system toggle switch located on the back or side of the keyboard to switch between macOS and Windows layouts. Ensure this switch is set to your operating system for correct key mapping.
4. Иштөө нускамалары
4.1. QMK/VIA Programmability
The Keychron Q2 Max is fully programmable with QMK/VIA open-source software. This allows you to remap keys, create macros, and customize the knob's functions across different layers.
- Download VIA: Расмий VIAга барыңыз website to download the latest software for your operating system (macOS, Windows, Linux).
- Download Keymap JSON: Obtain the specific keymap JSON file for the Keychron Q2 Max from the Keychron support page.
- Load Keymap in VIA: Open VIA, navigate to the "Settings" tab, and enable "Show Design tab". Drag and drop the downloaded JSON file into the "Design" tab to load your keyboard's layout.
- Ыңгайлаштыруу: Use the VIA interface to remap keys, assign macros, and configure the rotary knob. Changes are applied in real-time.
4.2. RGB арткы жарыктандыруу
The Q2 Max features 22 types of RGB LED backlighting. You can cycle through different lighting effects and adjust brightness directly on the keyboard using function key combinations or through the VIA software for more granular control.
4.3. Батарея жана заряддоо
The keyboard is equipped with a rechargeable Lithium Polymer battery. Connect the USB-C cable to charge the keyboard. The LED indicator will show charging status (usually red for charging, green for full). For optimal battery life, avoid fully discharging the battery frequently.
5. Техникалык тейлөө
5.1. Клавиатураңызды тазалоо
- Баскыч капкактары: Use the provided keycap puller to remove keycaps. Clean them with a mild soap and water solution, then dry thoroughly before reattaching.
- Которгучтар: Use compressed air to remove dust and debris from around the switches. Avoid spraying liquid directly into the switches.
- Иш: Wipe the aluminum case with a soft, damp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
5.2. Коммутаторлорду алмаштыруу
The Q2 Max features hot-swappable sockets, allowing you to change switches without soldering.
- Баскыч капкагын алып салуу: Алмаштыргыңыз келген которгучтан клавиатуранын капкагын акырындык менен алып салуу үчүн клавиатуранын капкагын тартуучу каражатты колдонуңуз.
- Которуштурууну алып салуу: Use the switch puller to grasp the top and bottom clips of the switch. Gently rock and pull the switch upwards until it detaches from the PCB.
- Жаңы которгуч орнотуу: Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight. Gently press down until the switch clicks into place. Do not force it, as bent pins can damage the socket.
- Баскыч капкагын кайра тиркөө: Баскыч капкагын кайра жаңы которгучка коюңуз.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Баскычтоп жооп бербей жатат (зымдуу) | Loose cable connection, faulty cable, driver issue. | Check USB-C cable connection. Try a different USB port or cable. Restart your computer. |
| Keyboard not connecting (wireless) | Low battery, incorrect mode switch, pairing issue, receiver not detected. | Charge the keyboard. Ensure mode switch is set to 2.4G or BT. Re-pair Bluetooth (Fn+1/2/3 for 4s). Try receiver in a different USB port. |
| Ачкычтар катталбайт же эки жолу терилбейт | Loose or faulty switch, debris in switch. | Remove keycap and switch. Clean the switch socket with compressed air. Reinstall or replace the switch. |
| RGB арткы жарыгы иштебей жатат | Backlight turned off, low brightness, software conflict. | Adjust backlight brightness/effect using keyboard shortcuts. Check VIA software settings. |
| QMK/VIA software not detecting keyboard | Keyboard not in wired mode, incorrect firmware, software version. | Ensure keyboard is connected via USB-C cable. Download the correct keymap JSON file. Update VIA software to the latest version. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | Keychron Q2 Max |
| Макет | 65% компакт |
| Байланыш | 2.4 ГГц зымсыз, Bluetooth 5.1, USB-C зымдуу |
| Добуш берүү көрсөткүчү | 1000 Hz (2.4 GHz Wireless & Wired) |
| Дене материалы | 6063 Aluminum (CNC machined) |
| Ыңгайлаштыруу | QMK/VIA Programmable, Hot-swappable PCB, Programmable Knob |
| Арткы жарыктандыруу | RGB LED (22 types) |
| Acoustic Дизайн | Multi-layered acoustic foams, Double-gasket design |
| Стабилизаторлор | Screw-In PCB Stabilizers |
| Батарея түрү | Литий полимери (кошулган) |
| Шайкеш OS | macOS, Windows, Linux |
| Элемент Салмагы | 4.27 фунт |
| Өлчөмдөр | 14.26 x 6.89 x 2.83 дюйм |
8. Кепилдик жана колдоо
Keychron products typically come with a limited warranty covering manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Keychron webсайт.
For technical support, troubleshooting assistance, or to download the latest drivers and firmware, please visit the Keychron support page:
Keychron Official Support Page
You can also find additional resources and community support on the Keychron brand store on Amazon: