Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your RUIZHI 12V DC 200A Remote Battery Disconnect Switch. This device is designed to remotely interrupt the power supply from your vehicle's battery, preventing discharge during periods of inactivity and offering an additional layer of anti-theft protection. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Коопсуздук маалыматы
- Always disconnect the negative terminal of the battery before beginning any electrical work on your vehicle to prevent electrical shock or short circuits.
- Ensure all connections are secure and properly insulated to avoid arcing or fire hazards.
- Do not overload the switch. The continuous working current is 200A, and the instantaneous starting current is 250A. Exceeding these limits can damage the device and pose a safety risk.
- The switch housing is made of flame-retardant materials. It is normal for the fuselage temperature to reach 70-80°C under full load, and engine compartment temperatures can reach 100°C.
- The two thin wires of the switch must be connected to the positive and negative terminals of the battery. The red wire connects to the positive terminal (Pin 86), and the black wire connects to the negative terminal (Pin 85). These connections must not be reversed.

Image: The main relay unit with a remote control and a clear warning about correct wiring for the positive (red wire, pin 86) and negative (black wire, pin 85) battery connections.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- 1 x Remote Battery Disconnect Switch Unit
- 2 x Remote Controls (Key Fobs)
- 2 x Battery Terminals (Clamps)
- 2 x Brass Posts
- 2 x Brass Sheets
- 1 x Red Wire (for positive connection)
- 1 x Black Wire (for negative connection)
- 1 x Clamp 50A
- 1 x Insulating Sleeve

Image: A complete set of components for the RUIZHI battery disconnect switch, including the main relay, two remote controls, wiring, and battery terminals.
Продукт бүттүview & Өзгөчөлүктөрү
The RUIZHI 12V DC 200A Remote Battery Disconnect Switch is designed for reliable power management in various vehicles. Its robust construction and remote operation provide convenience and enhanced security.
- Remote Disconnection: Allows you to cut off battery power remotely, preventing battery drain during long periods of vehicle inactivity.
- Уурулукка каршы функция: Disconnecting the battery power can act as an effective anti-theft measure.
- Жогорку сапаттагы курулуш: Features brass material, silver-plated contacts, pure copper wire, and a flame-retardant housing for durability, conductivity, and safety.
- Кеңири колдонуу: Suitable for 12V battery systems in automobiles, trucks, RVs, travel trailers, SUVs, boats, and electric tricycles.

Image: An illustration highlighting the key features of the battery disconnect switch, including battery discharge prevention, anti-theft capability, remote control operation, and long service life.

Image: A collage showing various applications for the battery disconnect switch, including a Jeep, an SUV, a boat, and an RV, demonstrating its versatility.
Техникалык шарттар
| Operating Voltage | 12 вольт DC |
| Continuous Rated Current | 200 Amperes |
| Instantaneous Starting Current | 250 Amperes |
| Иштөө режими | КҮЙГҮЗҮҮ ӨЧҮРҮҮ |
| Которуу түрү | Алыстан башкаруу |
| Байланыш материалы | Silver |
| Турак жай материалы | Өрткө каршы |
| Өлчөмдөрү (L x W x Y) | 8.5 x 8.1 x 7.9 см |
| Салмагы | 380 г |
| Минималдуу иштөө температурасы | 70°C (Internal) |
| Максималдуу иштөө температурасы | 80°C (Internal) |
Орнотуу (Орнотуу)
Follow these steps carefully to install the RUIZHI Remote Battery Disconnect Switch:
- Батареяны даярдоо: Before starting, ensure your vehicle's ignition is off. Disconnect the original negative power cable from your vehicle's battery. If you need to control the positive electrode, disconnect the positive cable instead.
- Connect the Relay to Negative Terminal: Connect one end of the relay (Pin 30) to the negative terminal of the battery. If controlling the positive, connect Pin 30 to the positive terminal.
- Башкаруу зымдарын туташтыруу:
- туташтыруу кызыл зым (Positive Pole 86 pin) to the оң терминал батарейканын
- туташтыруу кара зым (Negative Pole 85 pin) to the терс терминал батарейканын
Important: The red and black control wires must be connected correctly to the battery's positive and negative terminals, respectively. Do not reverse these connections.
- Connect Original Battery Cable: Remove the original battery main line and connect it to Pin 87 of the switch.
- Коопсуз байланыштар: Ensure all connections are tight and secure. Use the provided insulating sleeve for added protection.

Image: A detailed diagram illustrating the connection method for the battery disconnect switch, showing the red wire (Pin 86) to positive and black wire (Pin 85) to negative, along with the main battery cable connection.

Сүрөт: жакын план view of hands connecting the control wires to the battery disconnect switch, demonstrating a step in the installation process.
Иштөө нускамалары
The RUIZHI Remote Battery Disconnect Switch is operated using the provided remote controls.
- Электр кубатын туташтыруу (КҮЙГҮЗҮҮ) үчүн: Press the "ON" button on the remote control. You should hear a click from the relay, indicating that the battery power is connected.
- Электр кубатын өчүрүү (ӨЧҮРҮҮ) үчүн: Press the "OFF" button on the remote control. The click from the relay confirms that the battery power has been disconnected.
- The remote controls are pre-coded for direct use.

Image: A hand holding the remote control inside a vehicle, demonstrating the ease of remotely activating or deactivating the battery connection for anti-theft or power-saving purposes.
Техникалык тейлөө
The RUIZHI Remote Battery Disconnect Switch requires minimal maintenance. To ensure optimal performance and longevity:
- Periodically check all electrical connections for tightness and corrosion. Clean any corrosion with a wire brush and battery terminal cleaner.
- Ensure the switch unit is free from excessive dirt, moisture, or debris.
- Avoid exposing the remote controls to water or extreme temperatures.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Switch does not respond to remote. |
|
|
| Battery still drains when disconnected. |
|
|
| Switch gets excessively hot. |
|
|
Кепилдик жана колдоо
Кепилдик жөнүндө маалымат же техникалык колдоо алуу үчүн, сатып алуу платформасына кайрылыңыз же сатуучуга түз кайрылыңыз. Сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.