ANENG 683 Smart Digital Multimeter Колдонуучунун колдонмосу

1. Киришүү

The ANENG 683 Smart Digital Multimeter is a versatile and intelligent testing instrument designed for a wide range of electrical measurements. Featuring a large VA color reverse display and a smart sensor screen, it provides clear and accurate readings in various working environments. This multimeter is equipped with a built-in rechargeable lithium battery and comes with a durable silicone protective sleeve, ensuring both convenience and safety during use.

Image: The ANENG 683 Smart Digital Multimeter shown with its included test leads, charging cable, and carrying case.

2. Коопсуздук маалыматы

Please read and understand all safety warnings and operating instructions before using this multimeter. Failure to do so may result in injury or damage to the meter or equipment under test.

• Always ensure the test leads are properly connected and the function range is correctly selected before making any measurements.
• Do not exceed the maximum input limits for any function. Refer to the specifications section for details.
• Токтогуч чынжырлар менен иштөөдө өтө этият болуңуз. Жогорку вольтtages can cause severe injury or death.
• Do not use the multimeter if it appears damaged or if the test leads are frayed or broken.
• Keep hands and fingers behind the probe barriers during testing.
• Мультиметрди нымдуу чөйрөдө же жарылуучу чөйрөдө иштетпеңиз.
• Ар дайым чынжырдагы кубатты ажыратып, бардык жогорку көлөмдү чыгарыңызtage capacitors before measuring resistance, capacitance, or continuity.

3. Продукциянын өзгөчөлүктөрү

• Көп функциялуу өлчөө: Чаралар AC/DC тtage, AC/DC current, resistance, capacitance, temperature, frequency, diode, buzzer (continuity), fire line detection, and duty cycle.
• Smart Sensor Screen & VA Color Reverse Display: Easy to operate with a clear, high-contrast display for readability in various lighting conditions.
• 6000 саны дисплей: Provides high resolution for precise measurements.
• NCV байланышсыз индукциясы: AC томун коопсуз аныктайтtage without direct contact, with an audible and visual alarm.
• Интеграцияланган кол чырак: Illuminates the measurement area for convenience in dark environments.
• Soft Silicone Test Wires: High-quality, tensile, and resistant to high temperatures, freezing, and burning.
• Камтылган кайра заряддалуучу литий батареясы: Eliminates the need for frequent battery replacement, rechargeable via Type-C cable.
• Silicone Protective Sleeve: Provides effective protection against drops, shocks, and scratches.
• Маалыматты кармоо функциясы: Оңой жаздыруу үчүн көрсөтүлгөн окууну токтотот.
• Автоматтык түрдө өчүрүү: Батареянын иштөө мөөнөтүн үнөмдөйт.
• Батареянын төмөн көрсөткүчү: Alerts the user when the battery needs charging.

Сүрөт: Жакын план view of the ANENG 683's intelligent control screen highlighting its various measurement capabilities and touch controls.

4. Пакеттин мазмуну

Пакетти ачканда бардык буюмдар бар экенин жана бузулбаганын текшериңиз:

• ANENG 683 Smart Digital Мультиметр
• Сыноочу (Кызыл жана Кара)
• Type-C USB заряддоо кабели
• Ташуу кутусу
• Колдонуучунун Колдонмосу (бул документ)

5. Орнотуу

5.1. Баштапкы заряддоо

Before first use, fully charge the multimeter's built-in lithium battery. Connect the provided Type-C USB charging cable to the multimeter's USB port and to a standard USB power adapter (not included) or a computer USB port.

Сүрөт: каптал view of the ANENG 683 Multimeter, showing the USB-C charging port for battery replenishment.

5.2. Сыноо линияларын туташтыруу

Insert the red test lead into the "VΩmA" input jack and the black test lead into the "COM" (common) input jack. For current measurements exceeding 600mA (up to 10A), insert the red test lead into the "10A" input jack.

5.3. Күйгүзүү / Өчүрүү

Press the power button located on the side of the multimeter to turn it on. The device will automatically enter AUTO mode. To turn off, press and hold the power button until the display turns off.

6. Иштөө нускамалары

The ANENG 683 features a smart sensor screen for intuitive operation. Most functions are automatically detected in AUTO mode. For specific measurements, you can manually select functions using the touch buttons on the screen.

6.1. Автоматтык өлчөө (АВТО режим)

Upon powering on, the multimeter defaults to AUTO mode. In this mode, it automatically identifies and measures AC/DC voltage, каршылык жана үзгүлтүксүздүк. Жөн гана сыноо сымдарын чынжырчага же компонентке туташтырыңыз, ошондо эсептегич тиешелүү көрсөткүчтү көрсөтөт.

6.2. Manual Function Selection

Tap the "AUTO SELECT" button on the screen to cycle through manual measurement modes such as Voltage, Current, Resistance, Capacitance, Diode, and Frequency. The selected mode will be indicated on the display.

6.3. NCV (контактсыз томtagд) аныктоо

Tap the "Live NCV" button to activate NCV mode. Bring the top of the multimeter close to an AC voltage source. The meter will emit an audible alarm and the flashlight will flash red, with increasing frequency as it gets closer to the live wire.

6.4. Live Zero Fire Line Detection

Switch to the "Live" mode (often indicated by a lightning bolt icon or "Live" text). Insert the red test pen into the hole to distinguish between live (fire) and neutral (zero) lines. The flashlight will flash red and an alarm will sound for a live wire. No indication for a neutral wire.

Image: Illustration of the ANENG 683 Multimeter performing live wire detection, showing the difference in display and alarm for a live wire versus a zero line.

6.5. Маалыматтарды кармоо

Tap the "HOLD" button to freeze the current reading on the display. Tap it again to release the hold function.

6.6. Фонар

Tap the "Torch" button to turn the built-in flashlight on or off. This is useful for working in dimly lit areas.

Image: The ANENG 683 Multimeter actively measuring a circuit connected to a light bulb, demonstrating its practical application.

7. Техникалык тейлөө

7.1. Тазалоо

Мультиметрдин сasing жарнама мененamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from any circuits before cleaning.

7.2. Батареяны кубаттоо

Recharge the battery when the low battery indicator appears on the display. Use the provided Type-C USB cable. A full charge ensures optimal performance and battery longevity.

7.3. Сактоо

When not in use for extended periods, store the multimeter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) before long-term storage to preserve battery health.

8. Кыйынчылыктарды

• Эсептегич күйбөйт: Ensure the battery is charged. Connect the Type-C USB cable to charge the device.
• Көрсөтүлгөн көрсөткүч жок же "OL" көрсөткүчү көрсөтүлгөн жок: Check if the test leads are properly connected to the correct input jacks. Ensure the function range is appropriate for the measurement. "OL" (Overload) indicates the measured value exceeds the meter's range for the selected function.
• Туура эмес окуулар: Verify that the test leads are making good contact with the circuit. Ensure the battery is sufficiently charged. Avoid strong electromagnetic interference.
• NCV аныкталбайт томtage: Ensure the NCV sensor area (top of the meter) is close enough to the AC voltage булагы.

9. Техникалык шарттар

The following table outlines the technical specifications of the ANENG 683 Smart Digital Multimeter. Please note that these parameters are for reference only, and the actual measurement of the specific equipment shall prevail.

Image: A detailed table outlining the functional specifications, ranges, resolutions, and accuracies of the ANENG 683 Multimeter.

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official Generic brand webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.