ANENG 683 Smart Digital Multimeter Колдонуучунун колдонмосу

1. Продукт бүтүп калдыview

The ANENG 683 is a versatile and intelligent digital multimeter designed for precise electrical measurements. It features a large VA color reverse display with a smart sensor touch screen, offering clear readability and ease of operation. This device is capable of measuring AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, diode, and includes functions like NCV non-contact induction, fire line detection, duty cycle, and a built-in flashlight.

Figure 1: ANENG 683 Smart Multimeter and its complete set of accessories.

Негизги өзгөчөлүктөрү:

• Көп функциялуу өлчөө: Чаралар AC/DC тtage, AC/DC current, resistance, capacitance, frequency, temperature, diode, and more.
• Smart Touch Screen & VA Color Display: Intuitive operation with a large, clear VA color reverse display and 6000 counts max. display.
• NCV Non-contact Induction: AC томун коопсуз аныктайтtage without direct contact, with rapid alarm and flashlight indication.
• Камтылган кол чырак: Assists in illuminating dark work environments.
• Кайра заряддалуучу литий батареясы: Integrated 3.7V 2800mAh lithium battery with Type-C charging for convenience.
• Туруктуу дизайн: Wrapped in a silicone protective sleeve for enhanced durability, shock resistance, and scratch protection.

2. Орнотуу жана алгачкы колдонуу

2.1 Таңгактан чыгаруу жана текшерүү

Carefully remove the multimeter and all accessories from the packaging. Verify that all components are present and undamaged:

• ANENG 683 Smart Digital Multimeter
• Сыноочу (Кызыл жана Кара)
• Температура проба
• USB Type-C кубаттоочу кабель
• Сактоочу баштык
• Колдонуучунун Колдонмосу (бул документ)

Figure 2: Included accessories for the ANENG 683 Multimeter.

2.2 Батареяны заряддоо

The ANENG 683 Multimeter is equipped with a built-in rechargeable lithium battery. Before first use, or when the low battery indicator appears, charge the device using the provided USB Type-C cable.

1. Connect the Type-C end of the charging cable to the multimeter's charging port (typically located on the side or top).
2. Connect the USB-A end of the cable to a standard USB power adapter (e.g., phone charger, computer USB port, power bank).
3. The display will indicate charging status. Allow the battery to fully charge before extensive use.

2.3 Сыноо өткөргүчтөрүн туташтыруу

For most measurements, the test leads must be correctly connected to the multimeter.

• салыңыз кара тестирлөө COM (Жалпы) джек.
• салыңыз кызыл тестирлөө VΩmA джек үчүн томtage, resistance, capacitance, frequency, diode, and small current measurements.
• For high current (up to 10A) measurements, insert the кызыл тестирлөө 10A джек.

3. Иштөө нускамалары

3.1 Күйгүзүү/өчүрүү

Press and hold the power button (usually located on the side) to turn the multimeter ON or OFF. The device features an automatic power-off function to conserve battery life if left idle for a period.

Сүрөт 3: Алдыңкы view of the ANENG 683 Multimeter display.

3.2 Using the Touch Screen and Modes

The ANENG 683 features a smart sensor touch screen for mode selection and function activation. Tap the desired function icon on the screen to switch between measurement modes.

Figure 4: Interacting with the ANENG 683's touch screen.

Figure 5: Intelligent control screen displaying various measurement options.

3.3 Өлчөө функциялары

Select the appropriate function on the touch screen before taking a measurement.

• AC/DC Voltage (V): Connect test leads in parallel to the circuit or component.
• AC/DC Current (A/mA): Connect test leads in series with the circuit. Ensure correct jack (mA or 10A) is used.
• Каршылык (Ω): Ensure the circuit is de-energized. Connect test leads across the component.
• Сыйымдуулук (F): Ensure the capacitor is discharged. Connect test leads across the capacitor.
• Жыштык (Гц): Connect test leads to the signal source.
• Температура (°C/°F): Connect the temperature probe to the multimeter and place the probe tip on the object to be measured.
• Диод сыноо: Connect test leads across the diode.
• Continuity (Buzzer): Connect test leads across the circuit. A beep indicates continuity.
• NCV (контактсыз томtagд) индукция: Hold the NCV sensor near the conductor. The alarm and flashlight will indicate voltagд болушу.
• Live Zero Fire Line: Switch to Live mode. Insert the red test lead into the live wire hole. The flashlight will flash red and an alarm will sound for a live wire. No indication for a zero line.

Figure 6: Using the Live Zero Fire Line detection feature.

3.4 Маалыматты кармоо функциясы

Press the 'HOLD' button on the screen to freeze the current reading on the display. Press it again to release the hold and resume live readings.

3.5 Фонардын иштеши

The built-in flashlight can be activated by tapping the 'Torch' icon on the screen. This feature is useful for illuminating dimly lit work areas.

Figure 7: Multimeter flashlight in use.

4. Техникалык тейлөө

4.1 Тазалоо

To clean the multimeter, wipe the surface with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз. Тазалоодон мурун аппараттын өчүрүлгөнүн жана бардык чынжырлардан ажыратылганын текшериңиз.

4.2 Батареяга кам көрүү

Recharge the lithium battery regularly, especially if the device will not be used for an extended period, to maintain battery health. Avoid fully discharging the battery frequently.

4.3 Сактоо

When not in use, store the multimeter in its protective silicone sleeve and the provided storage bag to prevent damage from drops, impacts, and scratches. Store in a cool, dry place away from direct sunlight and extreme temperatures.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your ANENG 683 Multimeter.

• Түзмөк күйбөйт:
  Check if the battery is charged. Connect the Type-C charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• No reading or 'OL' (Overload) displayed:
  Ensure test leads are correctly inserted into the appropriate jacks for the selected measurement function. Verify that the measurement range is suitable for the value being measured (if not in auto-ranging mode). For resistance, ensure the circuit is de-energized.
• Туура эмес окуулар:
  Check test lead connections for looseness or damage. Ensure the correct measurement function is selected. Verify that the component or circuit being tested is stable.
• Экран жооп бербейт:
  Try restarting the device by powering it off and then on again. Ensure the screen is clean and dry.
• Батареянын төмөн көрсөткүчү:
  Recharge the multimeter using the provided Type-C USB cable.

6. Техникалык шарттар

The following table outlines the technical specifications of the ANENG 683 Smart Digital Multimeter.

Figure 8: Functional specifications table.

7. Кепилдик жана колдоо

Warranty information for your ANENG 683 Smart Digital Multimeter is typically provided with your purchase documentation. Please refer to the warranty card or contact the retailer/manufacturer directly for details regarding warranty coverage and terms.

For technical support, product inquiries, or assistance with troubleshooting beyond what is covered in this manual, please contact the manufacturer's customer service or the point of purchase. Keep your purchase receipt or order number handy for faster service.