1. Киришүү
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hyuduo 30A PWM Solar Charge Controller. This device is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It is suitable for 12V and 24V solar systems.

Сүрөт 1: Алдыңкы view of the Hyuduo 30A PWM Solar Charge Controller.
2. Коопсуздук маалыматы
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in personal injury or damage to the controller or other equipment.
- Батареяда жетиштүү көлөм бар экенин текшериңизtage for the controller to recognize the correct battery type during first installation.
- Install the controller as close as possible to the battery to minimize voltage drop from long wires.
- This controller is designed for lead-acid batteries (OPEN, AGM, GEL). It is not suitable for other battery types.
- Ensure all connections are tight and correct to prevent damage.
- Контроллерди өз алдынча бөлбөңүз же оңдоого аракет кылбаңыз. Тейлөө үчүн квалификациялуу кызматкерлерге кайрылыңыз.
- Keep the controller away from water, flammable gases, and corrosive substances.
3. Продукциянын өзгөчөлүктөрү
The Hyuduo 30A PWM Solar Charge Controller incorporates advanced technology for reliable solar power management:
- Industrial Grade Master Control Chip: Ensures stable and efficient operation with complete 3-stage PWM кубаттоо башкаруу.
- Чоң LCD дисплей: Provides clear status and data, allowing easy mode switching and parameter configuration.
- Комплекстүү коргоо: Built-in overcurrent, short circuit, open circuit, and reverse connection protection. All protections are self-recovery type, preventing damage to the controller.
- MOS Anti-Backup Circuit: Features ultra-low heat generation, ensuring optimal device performance and longevity.
- Туруктуу курулуш: Made from excellent ABS material, providing impact resistance, high ignition point, and anti-aging/erosion properties.
- USB чыгышы: Two USB output ports (5V, 1A maximum) for charging external devices.
4. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- Hyuduo 30A PWM Solar Charge Controller
- Колдонуучунун колдонмосу (бул документ)
5. Продукт бүтүп калдыview
Familiarize yourself with the components of your solar charge controller.

2-сүрөт: Жогорку view showing connection terminals and buttons.

3-сүрөт: Детальдуу view of the LCD display and control buttons.
5.1. Дисплей жана баскычтар
The large LCD display shows real-time system status and parameters. The three buttons below the display allow for navigation and setting adjustments:
- Сол баскыч: Меню / Кирүү
- Орто баскыч: Жогору / көбөйтүү
- Оң баскыч: Төмөн / төмөндөтүү
6. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| System Voltage | 12V, 24V Automatic Adaptation |
| Номиналдуу разряддык ток | 10A (Note: Product title indicates 30A, please refer to product label for actual rating) |
| Maximum Photovoltaic Voltage | Max 23V for 12V Battery; Max 46V for 24V Battery |
| Light Control On Threshold | PV Panel 8V (Light Control On with delay) |
| Light Controlled Off Threshold | PV Panel 8V (Light Controlled Off with delay) |
| USB чыгышы | 2 Way USB Output, 5V, 1A (Maximum) |
| Иштөө температурасы | -35°Cден +60°Cге чейин |
| Материал | ABS |
| Пакеттин өлчөмдөрү | 5.51 x 3.15 x 1.57 дюйм |
| Элемент Салмагы | 5.3 унция |
Note: The product description lists a Rated Discharge Current of 10A, while the product title specifies 30A. Please verify the actual rating on the product label or packaging.
7. Орнотуу (Орнотуу)
Follow these steps for proper installation of your solar charge controller. Ensure all power sources are disconnected before making any connections.

4-сүрөт: Арткы view зым терминалдары менен.
- Батареяны туташтыруу: Connect the battery to the charge controller first. Ensure the battery has sufficient voltage for the controller to recognize the correct battery type (12V or 24V). Connect the positive (+) and negative (-) terminals correctly.
- Күн панелин туташтыруу: Connect the solar panel to the charge controller. Ensure correct polarity (+ and -).
- Жүктү туташтыруу: Connect the DC load to the charge controller. Ensure correct polarity (+ and -).
Маанилүү: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.
Install the controller in a well-ventilated area, away from direct sunlight and moisture. Mount it as close to the battery as possible to prevent voltage drop in the battery cables.
8. Иштөө нускамалары
Once installed, the controller will automatically begin charging. The LCD display provides real-time information about your system.
8.1. Дисплей режимдери
The LCD cycles through various display screens automatically. You can also manually cycle through them or enter parameter setting mode using the buttons.
8.2. Параметр конфигурациясы
To adjust charging and discharge parameters:
- басыңыз Меню button (left button) to enter the parameter setting interface.
- колдонуу Up (middle) and Төмөн (right) buttons to navigate through parameters.
- басыңыз Меню button again to select a parameter for modification. The value will start flashing.
- колдонуу Up жана Төмөн маанисин өзгөртүү үчүн баскычтар.
- басыңыз Меню button to confirm the new value and exit the modification mode for that parameter.
- көпкө басыңыз Меню параметр орнотуу интерфейсинен чыгуу үчүн баскыч.
Refer to the specific icons on the LCD for battery status, solar charging status, and load discharge status.
9. Техникалык тейлөө
Regular maintenance ensures optimal performance and longevity of your solar charge controller.
- Байланыштарды текшерүү: Мезгил-мезгили менен бардык зымдарды туташтыргычтын бекемдигин жана коррозиясын текшерип туруңуз.
- Контроллерди тазалоо: Контроллерди чаңдан жана таштандыдан таза жана таза кармаңыз. Тазалоо үчүн кургак чүпүрөктү колдонуңуз.
- Вентиляция: Ensure the installation area remains well-ventilated to prevent overheating.
- Батареянын ден соолугу: Monitor your battery's health and ensure it is properly maintained according to the battery manufacturer's guidelines.
10. Кыйынчылыктарды
If you encounter issues with your solar charge controller, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей жок/Кубат жок | Батарея туташкан эмес же кубаты азtage; reversed polarity; loose connection. | Батарея байланыштарын жана тtage. Туура полярдуулукту текшериңиз. Бардык терминалдарды бекемдеңиз. |
| Батарея заряддалбай жатат | Solar panel not connected or low voltage; reversed polarity; shading on panels; faulty panel. | Күн батареяларынын туташууларын жана көлөмүн текшериңизtage. Ensure correct polarity. Clear any shading. Test solar panel output. |
| Жүк иштебейт | Load not connected or reversed polarity; battery low; load overcurrent; load output disabled. | Check load connections and polarity. Charge battery. Reduce load. Check load output settings on controller. |
| Overcurrent/Short circuit protection activated | Load current exceeds controller rating; short circuit in load wiring. | Reduce load or use a smaller load. Inspect load wiring for short circuits. The controller should self-recover once the fault is cleared. |
11. Кепилдик жана колдоо
Кепилдик маалыматы же техникалык колдоо алуу үчүн сатуучуга же өндүрүүчүгө түздөн-түз кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Кошумча жардам алуу үчүн, сураныч, баш багыңыз Hyuduo Store.