Ortis Hi-Lo Sump Pump Switch Controller KJ-033 User Manual

1. Киришүү

The Ortis Hi-Lo Sump Pump Switch Controller KJ-033 is an electronic adjustable float switch designed for automatic water level management in various applications such as sewage pits, fish tanks, and water tanks. It features stainless steel anti-corrosion dual sensors and supports both 220V and 110V AC power inputs. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Коопсуздук маалыматы

Сураныч, орнотуу жана иштетүү алдында бардык коопсуздук нускамаларын кылдаттык менен окуп чыгыңыз. Бул нускамаларды аткарбоо электр шокуна, өрткө же олуттуу жаракатка алып келиши мүмкүн.

• Электр коркунучу: Кандайдыр бир орнотууну, техникалык тейлөөнү же көйгөйлөрдү чечүүдөн мурун электр менен жабдуунун ажыратылганын текшериңиз.
• Тtage Шайкештик: кубат менен камсыз кылуу Voltage matches the controller's specifications (220V/110V AC).
• Туура Жерге салуу: Always connect the device to a properly grounded outlet.
• Суу таасири: Do not immerse the controller unit in water. The controller unit is designed to be mounted above the water level.
• Квалификациялуу кадрларды: Installation and electrical connections should be performed by qualified personnel if you are unsure.
• Экологиялык шарттар: Do not operate the device in explosive atmospheres or where flammable liquids or gases are present.

3. Продукциянын өзгөчөлүктөрү

The Ortis KJ-033 controller offers several features for reliable water level management:

• Dual Stainless Steel Sensors: Anti-corrosion sensors for accurate water level detection.
• Жөнгө салынуучу сенсордук диапазон: Sensors can be adjusted from 1/2 inch to 20 inches to define high and low water levels.
• Бир нече иштөө режимдери: Supports Drain Mode (for emptying) and Water Mode (for filling).
• LED көрсөткүчтөрү: Visual feedback for power, load status, and alarm conditions.
• Ашыкча жүктөн коргоо: Integrated protection for connected pumps.
• Үнсүз функция: Allows silencing of the alarm.
• Кеңири колдонуу: Suitable for sewage pits, fish tanks, water tanks, and other water management systems.

3.1-сүрөт: Ortis Water Level Controller Overview with Key Features.

3.2-сүрөт: Various Application Scenarios for the Controller.

4. Орнотуу жана орнотуу

Proper installation is crucial for the reliable operation of the controller.

4.1 Контроллерди орнотуу

The controller unit should be mounted in a dry location, above the maximum water level, and within reach of a grounded power outlet.

• Бурама орнотуу: Use appropriate screws and anchors to secure the controller to a wall or stable surface through the mounting tabs.
• Соручу чөйчөктү орнотуу: For temporary or non-permanent installations, a suction cup can be used to attach the controller to a smooth, clean surface.

4.1-сүрөт: Controller Installation Methods.

4.2 Sensor Installation and Adjustment

The dual sensors detect the high and low water levels. Their position determines the operating range of your pump.

• Сенсордун жайгашуусу: Position the sensors vertically in the water, ensuring they are securely fastened and will not move. The lower sensor defines the 'low' water level, and the upper sensor defines the 'high' water level.
• Жөнгө салынуучу диапазон: The sensors can be adjusted along their cables to set the desired water level range, from 1/2 inch to 20 inches apart. Ensure both sensors are submerged at the desired 'on' level and the lower sensor is exposed at the desired 'off' level for drain mode, or vice versa for water mode.
• Кабелдик башкаруу: Route sensor cables to prevent entanglement or damage.

4.2-сүрөт: Adjustable Sensor Installation.

4.3 Электрдик туташуу

• Электр сайгычы: Plug the controller's power cord into a grounded 220V or 110V AC outlet.
• Насос туташуу: Plug your sump pump or other load device into the outlet on the front of the controller. Ensure the pump's power requirements do not exceed the controller's output capacity (15A, up to 2HP).

4.3-сүрөт: Example Sump Pit Installation.

5. Иштөө нускамалары

The controller features a simple interface for selecting operating modes and managing alarms.

5.1-сүрөт: Башкаруу панелиview.

5.1 Режимди тандоо

Use the 'Drain' and 'Water' buttons to select the desired operating mode:

• Дренаж режими: (LED indicator 'Drain' illuminates) In this mode, the controller activates the pump when the water level reaches the upper (high) sensor and deactivates it when the water level drops below the lower (low) sensor. This mode is typically used for emptying sewage pits or sumps.
• Суу режими: (LED indicator 'Water' illuminates) In this mode, the controller activates the pump when the water level drops below the lower (low) sensor and deactivates it when the water level reaches the upper (high) sensor. This mode is typically used for replenishing water in fish tanks or water tanks.

5.2 Power and Operation Switch

The main switch controls the power and operational state of the connected load:

• АВТО: (LED indicator 'AUTO' illuminates) The controller operates automatically based on the selected mode (Drain or Water) and sensor readings.
• ӨЧҮК: (LED indicator 'OFF' illuminates) The connected pump is turned off, regardless of water levels.
• КҮЙҮК: (LED indicator 'ON' illuminates) The connected pump is continuously turned on, regardless of water levels. Use this for manual override or continuous operation.

5.3 Үнсүз кылуу функциясы

Press the 'Mute' button to silence any active alarms. The 'DisAlarm' LED will illuminate when the alarm is muted.

5.2-сүрөт: Operational Logic in Drain Mode (Sewage Pit Exampле).

6. Техникалык тейлөө

Regular maintenance ensures the longevity and reliable operation of your Ortis controller.

• Сенсор тазалоо: Periodically inspect and clean the stainless steel sensors to remove any buildup of debris, algae, or mineral deposits that could affect their accuracy. Disconnect power before cleaning.
• Кабелдик текшерүү: Check all cables and connections for signs of wear, damage, or corrosion. Replace any damaged components immediately.
• Башкаруучу блок: Keep the controller unit clean and dry. Avoid exposing it to direct sunlight or extreme temperatures.
• Сыноо операциясы: Periodically test the controller's operation by manually raising or lowering water levels to ensure the pump activates and deactivates as expected in the selected mode.

7. Кыйынчылыктарды

Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицага кайрылыңыз.

8. Техникалык шарттар

8.1-сүрөт: Controller Dimensions.

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the product packaging or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.

Өндүрүүчү: FJKJ INC.