Rakstore XY-MD02
Rakstore XY-MD02 SHT20 Temperature and Humidity Transmitter Module User Manual
Model: XY-MD02
1. Продукт бүтүп калдыview
The Rakstore XY-MD02 is an industrial-grade temperature and humidity transmitter module. It integrates a high-precision SHT20 sensor and communicates via RS485 using the Modbus-RTU protocol. This module is designed for reliable and accurate environmental monitoring in various applications.
Негизги өзгөчөлүктөрү:
- Industrial-grade chip and SHT20 sensor for high reliability and precision.
- RS485 output signal.
- Supports Modbus-RTU protocol and custom common protocol.
- Wide power supply range: DC 5V-30V.
- Temperature accuracy: ±0.5℃ (at 25℃).
- Humidity accuracy: ±3%RH.
2. Пакеттин мазмуну
Пакетти ачканда, бардык компоненттер бар экенин жана бузулбаганын текшериңиз.
- 1 x XY-MD02 Temperature and Humidity Transmitter Module
Эгерде кандайдыр бир нерселер жок болсо же бузулса, кардарларды колдоо менен байланышыңыз.
3. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модел | XY-MD02 |
| Сенсор түрү | SHT20 |
| Электр камсыздоо | DC 5V-30V |
| Output Signal | RS485 |
| Байланыш протоколу | Modbus-RTU, Custom Common Protocol |
| Температуранын тактыгы | ±0.5℃ (at 25℃) |
| Нымдуулуктун тактыгы | ± 3% RH |
| Өлчөмдөр | 66мм x 46мм x 29мм (болжол менен) |
4. Орнотуу жана орнотуу
4.1 Физикалык орнотуу
The XY-MD02 module supports standard 35mm DIN rail installation. Ensure the module is securely clipped onto the DIN rail in a location free from excessive vibration, direct sunlight, or extreme temperatures.
Figure 1: Standard 35mm DIN rail installation. The module features clips for easy mounting onto a DIN35 guide rail.
Figure 2: Dimensions of the XY-MD02 module, approximately 66mm x 46mm x 29mm.
4.2 Электр өткөргүч схемасы
Connect the module according to the following wiring diagram. Ensure correct polarity for the power supply and proper connection for the RS485 communication lines.
Figure 3: Wiring connections for the XY-MD02 module. Connect DC 5-30V to '+' and '-' terminals, and RS485 A+ and B- to their respective terminals.
- Туруктуу ток 5-30V: Connect the positive (+) and negative (-) terminals of your DC power supply.
- RS485 A+: Connect to the A+ line of your RS485 network.
- RS485 B-: Connect to the B- line of your RS485 network.
Caution: Incorrect wiring can damage the module. Always verify connections before applying power.
5. Иштөө нускамалары
5.1 Байланыш протоколу
The XY-MD02 module supports the Modbus-RTU protocol. For detailed register addresses and communication commands, refer to the Modbus-RTU protocol documentation specific to this module (typically provided separately or available for download from the manufacturer).
General Modbus-RTU Parameters:
- Берүү ылдамдыгы: Typically 9600 bps (configurable).
- Маалымат биттери: 8.
- Токтоочу биттер: 1.
- Паритет: None (configurable).
- Кулдун дареги: Typically 1 (configurable).
The module will begin transmitting temperature and humidity data over the RS485 bus once powered and correctly configured.
5.2 Маалыматтарды окуу
To read temperature and humidity data, send Modbus-RTU read holding registers (Function Code 0x03) or read input registers (Function Code 0x04) commands to the module's slave address. The specific register addresses for temperature and humidity values will be outlined in the detailed protocol documentation.
Example (conceptual):
- Temperature Register: Address X (e.g., 0x0001)
- Humidity Register: Address Y (e.g., 0x0002)
The returned values will typically be integer representations that need to be scaled (e.g., divided by 10 or 100) to obtain the actual temperature in ℃ and humidity in %RH.
6. Техникалык тейлөө
The XY-MD02 module is designed for low maintenance. However, periodic checks can ensure optimal performance:
- Тазалоо: Keep the sensor area free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Байланыштары: Зымдардын туташууларынын бекем жана дат баспагандыгын текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.
- Курчап турган чөйрө: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent sensor degradation.
Warning: Do not attempt to open the module casing as it may void the warranty and expose internal components to damage.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No power indicator / Module not responding | Туура эмес электр энергиясыtage or polarity; Loose power connection. | Verify power supply is within DC 5V-30V. Check wiring for correct polarity (+/-). Ensure connections are secure. |
| No data received via RS485 | Incorrect RS485 wiring (A+/B- reversed); Incorrect communication parameters (baud rate, parity, stop bits); Incorrect slave address; RS485 bus termination issues. | Check A+ and B- wiring. Verify communication parameters match the module's settings. Ensure the correct slave address is used. Add or check termination resistors if on a long bus. |
| Так эмес окуулар | Sensor obstructed or dirty; Module exposed to extreme conditions; Sensor damage. | Clean the sensor area. Relocate the module to a more stable environment. If issues persist, the sensor may be damaged and require replacement. |
8. Кепилдик жана колдоо
This Rakstore XY-MD02 module comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or inquiries regarding the Modbus-RTU protocol documentation, please contact Rakstore customer service or visit their official webсайт.
Өндүрүүчү: RAKSTORE
Биринчи жеткиликтүү болгон күнү: 20-март, 2024-жыл
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.