CREWORKS 1.5-30mm Electric Wire Stripping Machine

1. Киришүү

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 1.5-30mm Electric Wire Stripping Machine. This automatic wire stripper is designed to remove plastic and rubber insulation from old electrical wires, facilitating copper recovery. It features a 180W motor, capable of stripping wires at speeds up to 30 meters per minute, with a low noise level of 25 dB. The machine is equipped with 5 distinct feed channels, accommodating wire widths from 1.5 mm to 30 mm, making it suitable for a wide range of common wire sizes. Its durable construction, featuring a reinforced aluminum alloy frame and steel blades, ensures long-term reliability. A built-in cooling fan prevents overheating during extended use. Please read this manual thoroughly before operating the machine.

Figure 1: CREWORKS 1.5-30mm Electric Wire Stripping Machine.

2. Коопсуздук нускамалары

Жаракат алуунун жана машинанын бузулушунун алдын алуу үчүн ар дайым төмөнкү коопсуздук көрсөтмөлөрүн аткарыңыз:

• Колдонмону окуу: Иштөө алдында бардык көрсөтмөлөрдү жана эскертүүлөрдү түшүнүңүз.
• Жеке коргонуу каражаттары (ЖКК): Always wear safety glasses, gloves, and appropriate work attire. Avoid loose clothing or jewelry that could get caught in moving parts.
• Иш чөйрөсү: Ensure your work area is clean, well-lit, and free from obstructions. Keep children and bystanders away from the machine during operation.
• Электр коопсуздугу: Connect the machine to a properly grounded power outlet. Do not operate in wet conditions or with wet hands. Inspect the power cord for damage before each use.
• Бычактын коопсуздугу: The blades are extremely sharp. Exercise extreme caution when adjusting or cleaning them. Always disconnect power before performing maintenance.
• Шашылыш токтотуу: Авариялык токтотуу баскычынын жайгашкан жери жана функциясы менен таанышып алыңыз.
• Зым шайкештиги: Only strip wires within the specified diameter range (1.5 mm to 30 mm).
• Вентиляция: Ensure adequate ventilation to prevent motor overheating. The integrated cooling fan assists in this.
• Коопсуз жайгаштыруу: Anchor the machine to a stable workbench or surface before use to prevent movement during operation.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1 x CREWORKS Electric Wire Stripping Machine
• 1 x User Manual
• 2 x Hex Wrenches (for adjustments)
• 1 x Ventilation Plug
• 2 x коргоочу мээлейлер

Figure 2: Package contents of the wire stripping machine.

4. Продукт бүтүп калдыview

Familiarize yourself with the components of the wire stripping machine:

Figure 3: Product Diagram with labeled parts.

• Мотор: Provides power for the stripping mechanism.
• Blade Adjustment Knobs: Used to precisely set the blade height for different wire diameters.
• Байкоо терезеси: Allows visual inspection of the stripping process.
• Blade Support: Holds the stripping blades in place.
• Бычак: The cutting component that removes wire insulation.
• Ролик: Guides the wire through the stripping mechanism.
• Feed Hole Plate: Features multiple channels for various wire sizes.
• Токтотуу баскычы (кызыл): Immediately halts machine operation.
• Start Button (Green): Initiates machine operation.
• Электр кабели: Connects the machine to the electrical supply.

Figure 4: Five distinct feed channels for various wire sizes.

5. Орнотуу

1. Пакеттен чыгаруу: Carefully remove the machine and all accessories from the packaging. Retain packaging for future storage or transport.
2. Жайгашкан жери: Place the wire stripping machine on a stable, level, and secure workbench. Use the mounting holes on the base to anchor the machine if prolonged or heavy-duty use is anticipated.
3. Кубат туташуу: Ensure the machine's power switch is in the 'OFF' position. Connect the power cord to a suitable grounded electrical outlet (refer to specifications for voltagд талаптар).
4. Бычактын бийиктигин тууралоо: Before stripping, adjust the blade height using the adjustment knobs. Select the appropriate feed channel for your wire diameter. Turn the adjustment knob until the blade just touches the insulation of the wire without cutting into the copper conductor. Test with a small piece of wire first.

Figure 5: Close-up of the ultra-sharp blades and V-shaped rollers.

6. Иштөө нускамалары

Follow these steps for safe and effective wire stripping:

1. Зымды даярдоо: Ensure the wire is straight and free of kinks or bends.
2. Каналды тандоо: Choose the feed channel that best matches the diameter of the wire you intend to strip.
3. Бычакты тууралоо: Fine-tune the blade height using the adjustment knob for the selected channel. The blade should score the insulation without damaging the conductor.
4. Машинаны ишке киргизүү: Press the green 'Start' button to power on the machine.
5. Жетүүчү зым: Carefully insert the end of the insulated wire into the chosen feed hole. The rollers will automatically pull the wire through the machine.
6. Collect Stripped Wire: The stripped insulation will separate from the copper conductor, which will exit from the rear of the machine. Collect the stripped copper.
7. Шашылыш токтотуу: In case of any malfunction or emergency, immediately press the red 'Stop' button.
8. Өчүрүү: After use, press the red 'Stop' button and disconnect the machine from the power supply.

Figure 6: Easy-to-follow steps for operating the wire stripping machine.

Figure 7: The machine handles various wire types and sizes.

7. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the lifespan of your machine:

• Тазалоо: After each use, disconnect the power and clean the machine. Remove any accumulated insulation debris from the blades, rollers, and feed channels using a brush or compressed air.
• Бычак текшерүү: Periodically inspect the blades for wear, dullness, or damage. Sharp blades are crucial for efficient stripping. Replace dull or damaged blades promptly.
• Майлоо: Apply a small amount of light machine oil to moving parts, such as the blade adjustment mechanism and rollers, as needed to ensure smooth operation.
• Муздатуу желдеткич: Ensure the cooling fan is free from dust and debris to maintain effective heat dissipation.
• Сактагыч: Машинаны колдонбогондо кургак, таза чөйрөдө сактаңыз.

Figure 8: The powerful cooling fan helps prevent overheating.

8. Кыйынчылыктарды

Жалпы маселелер жана аларды чечүү үчүн бул бөлүмдү караңыз:

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information, please refer to the documentation included with your purchase or contact the retailer. For technical support, spare parts, or service inquiries, please contact CREWORKS customer service through their official website or the contact information provided in your purchase documentation. Please have your model number (WSM-NM30-DE) and purchase date available when contacting support.