Jectse MT24 25 100P

Jectse MT24 25 100P 24V Water Booster Pump Instruction Manual

Model: MT24 25 100P | Brand: Jectse

1. Киришүү

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Jectse MT24 25 100P 24V Water Booster Pump. Please read these instructions carefully before use and retain them for future reference. This pump is designed to increase water pressure in various domestic and agricultural applications.

2. Коопсуздук маалыматы

  • Электр энергиясы насостун көлөмүнө дал келүүсүн текшериңизtagталаптар (24V).
  • Do not operate the pump with damaged cables or plugs.
  • Avoid immersing the pump in water. The pump has an IP56 rating, indicating protection against dust and strong jets of water, but it is not submersible.
  • Иштеп жатканда насостун айланасында жакшы желдетүүнү камсыз кылыңыз.
  • Do not use the pump for flammable or corrosive liquids.
  • Keep children and unauthorized personnel away from the operating pump.
  • Кандайдыр бир тейлөө же орнотууну аткаруудан мурун электр энергиясын өчүрүңүз.
  • Operating temperature for the pump is 0-40℃, medium temperature 4-80℃, and liquid temperature 0-65℃. Do not exceed these limits.

3. Продукциянын өзгөчөлүктөрү

  • Кургак чуркоодон коргоо: The pump automatically stops when water supply is low to prevent damage.
  • Автоматтык баштоо/токтоо: In automatic mode, the pump starts and stops based on faucet opening and closing.
  • Low Pressure Start: The pump can switch to low pressure mode if the water flow is insufficient to trigger automatic start.
  • Интеллектуалдык окуу: The water booster pump intelligently learns and selects an efficient boosting solution based on varying water flow and pressure conditions.
  • Энергияны үнөмдөө жана тынч иштөө: Equipped with a brushless motor and centrifugal impeller, the pump operates quietly and efficiently.

4. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

  • 1 x Water Booster Pump (Model: MT24 25 100P)
  • 1 x Power Adapter (EU Plug, 100-240V input)
  • 1 x Threaded Tube
  • 1 x Instruction Manual
  • 2 х бурамалар
  • 1 x Strong Adhesive Sticker
Jectse MT24 25 100P Water Booster Pump and included accessories: power adapter, threaded tube, screws, and adhesive sticker.
Image 4.1: Jectse MT24 25 100P Water Booster Pump and included accessories.

5. Техникалык шарттар

СпецификацияНарк
МоделMT24 25 100P
Operating Voltage24 V
Учурдагы4.2 А
Plug Voltage100-240 В
Жылуулоо даражасыH классы
Коргоо рейтингиIP56
Boost Effect100 Па
Мотор күчү100 Вт
Ызы-чуу деңгээлиLow Noise
Иштөө режимиManual and Automatic Dual Control
Flow RateМүнөтүнө 25 литр
Лифт25 м
Pipe Inner DiameterБолжол менен 15 мм / 0.6 дюйм
Айлана-чөйрөнүн температурасы0-40℃
Орто температура4-80℃
Суюк температура0-65℃
Чыгуу басымы2 бар
Максималдуу басым1 МПа
Туташуу ыкмасыжиптүү
МатериалABS, жез
ТүсКөк

6. Орнотуу жана орнотуу

The Jectse MT24 25 100P water booster pump is designed for straightforward installation. It can be integrated into various water systems to enhance pressure.

Жалпы орнотуу көрсөтмөлөрү:

  • Identify the cold and hot water inlet pipes.
  • Install the booster pump at the designated location in the water line.
  • Суу агып кетпеши үчүн бардык туташуулардын коопсуз жана суу өткөрбөгөндүгүн текшериңиз.
  • Use a wrench to connect the pump to the pipeline for easy and secure installation.
Jectse water booster pump installed under a sink, connected to the water pipes. Text overlay indicates easy installation with a wrench.
Image 6.1: Pump installation under a sink, highlighting easy connection.

Installation Diagrams for Various Applications:

Diagram showing installation of the booster pump for faucet pressurization and sprinkler pressurization. Arrows indicate cold and hot water flow directions.
Image 6.2: Installation for Faucet and Sprinkler Pressurization.
Diagram showing installation of the booster pump for electric water heater pressurization. Arrows indicate cold and hot water flow directions.
Image 6.3: Installation for Electric Water Heater Pressurization.
Diagram showing installation of the booster pump for gas water heater pressurization and solar water heater pressurization. Arrows indicate cold and hot water flow directions.
Image 6.4: Installation for Gas and Solar Water Heater Pressurization.

7. Иштөө нускамалары

The pump features both manual and automatic control modes. For most applications, the automatic mode is recommended.

Автоматтык режим:

  • Once installed and powered, the pump will automatically detect water flow.
  • When a faucet or water outlet is opened, the pump will start to boost pressure.
  • When the faucet or water outlet is closed, the pump will automatically stop.
  • The intelligent learning function allows the pump to adapt to different water flow and pressure situations for optimal performance.
Jectse water booster pump installed next to a water heater, with text 'AL Intelligent Learning' and a description of its function.
Image 7.1: Intelligent Learning feature of the pump.

Low Pressure Start:

  • If the initial water flow is too low to trigger the automatic start, the pump can engage a low-pressure start mode to initiate boosting.

Кол режими:

  • Refer to the control panel on the pump for manual operation options.
Жакын план view of the Jectse water booster pump's control panel, showing the power button and indicator lights.
Image 7.2: Pump control panel.
Comparison images showing water output effect before and after installation of the booster pump for both a faucet and a shower head, demonstrating increased pressure.
Image 7.3: Visual comparison of water pressure before and after pump installation.

8. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your water booster pump.

  • Тазалоо: Жарнама менен насостун сыртын мезгил-мезгили менен тазалап туруңузamp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
  • Текшерүү: Regularly check for any signs of leaks around connections. Ensure the power cable is not damaged.
  • Кыштоо: If the pump is installed in an area subject to freezing temperatures, ensure it is drained or protected from frost to prevent damage.
  • Чыпка текшерүү: If your system includes an inline filter, check and clean it as per its manufacturer's instructions to prevent debris from entering the pump.

9. Кыйынчылыктарды

Насосуңузда көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

КөйгөйМүмкүн себепЧечим
Насос иштебейтЭлектр энергиясы жок
Insufficient water flow (dry run protection activated)
Blocked inlet/outlet
кубат туташуу жана розетка текшерүү
Адекваттуу суу менен камсыз кылуу
Check pipes for blockages
Low boost effectPartial blockage in pipes
Системада аба
Туура эмес орнотуу
Inspect pipes for debris
Системадан абаны чыгарыңыз
Review орнотуу диаграммалары
Насос үзгүлтүксүз иштейтСистемада агып кетүү
Сенсордун бузулушу
Бардык байланыштарды агып кеткендигин текшериңиз
Көйгөй чечилбесе, кардарларды колдоо кызматына кайрылыңыз
Адаттан тышкаркы ызы -чууНасостогу аба
Дөңгөлөктөгү сыныктар
Бошоң монтаждоо
Bleed air
Disconnect power and inspect impeller (if accessible)
Ensure pump is securely mounted

Бул чечимдерди колдонуу аракетинен кийин көйгөй чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

10. Кепилдик жана колдоо

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact the retailer or manufacturer directly.

© 2026 Jectse. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.