VECELO Dining Table Set for 4 - Instruction Manual

1. Киришүү

This manual provides comprehensive instructions for the assembly, safe use, and proper maintenance of your VECELO 5-Piece Dining Table Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Коопсуздук маалыматы

• Чийип калбашы үчүн ар дайым продуктуну жумшак, таза бетке чогултуңуз.
• Колдонуудан мурун бардык бурамалар жана болттор бекем бекитилгенин текшериңиз. Зарылчылыкка жараша мезгил-мезгили менен текшерип, кайра бекитиңиз.
• Столдун же отургучтун үстүндө турбаңыз.
• Чогултуу учурунда кичинекей бөлүктөрүн балдардан алыс кармаңыз.
• Салмакты столдун бетине бирдей бөлүштүрүңүз.
• Do not exceed the maximum weight capacities: Table: 180 lbs, Each Chair: 320 lbs.

3. Пакеттин мазмуну

Монтаждоону баштоодон мурун бардык компоненттер бар экендигин текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, кардарларды колдоо менен байланышыңыз.

• 1 x Rectangular Dining Table
• 4 x Ашкана отургучтары
• 1 x Аксессуарлар баштыгы (бурамаларды, болтторду жана шаймандарды камтыйт)
• 1 х Колдонуучунун колдонмосу (бул документ)

4. Монтаждоо боюнча нускамалар

Follow these steps carefully for proper assembly. It is recommended to have two people for table assembly.

4.1. Төрагалык Ассамблея

Маанилүү кеңеш: When assembling the chair frame, do not fully tighten screws until all parts are loosely connected. This allows for adjustment and proper alignment. Fully tighten all screws once the chair is upright and stable.

1. Step 1: Assemble Chair Frame. Attach the chair leg pieces together using the provided screws. Ensure the front and rear iron support brackets (Parts 6 and 7) are correctly oriented. Part 6 (shorter, 330mm/13") goes on the back side, and Part 7 (longer, 360mm/14") goes near the leg when you sit. Refer to the image for correct placement.
2. Step 2: Attach Seat. Place the chair seat (Part 5) onto the assembled frame. The chair seat is trapezoid-shaped, not square. Ensure the longer side (395mm/15.5") is at the front and the shorter side (355mm/14") is at the back to align with the frame. Secure with screws.
3. Step 3: Attach Backrest. Align the backrest (Part 4) with the upper part of the chair frame. The backrest screw holes and metal frame holes must match correctly. The shorter distance (268mm/10.5") between holes should align with the frame. Secure with screws.
4. 4-кадам: Акыркы бекемдөө. Once all parts are loosely assembled and correctly aligned, carefully tighten all screws using the provided tool. Do not overtighten.

4.2. Үстөлдү чогултуу

The table assembly typically involves attaching the legs to the tabletop. Refer to the included instruction sheet for specific diagrams and screw types.

1. Step 1: Prepare Tabletop. Чийилип калбашы үчүн, столдун үстүн оодарып, жумшак, таза бетке коюңуз.
2. Step 2: Attach Legs. Align each table leg with the pre-drilled holes on the underside of the tabletop. Secure each leg using the appropriate screws and bolts from the accessory bag. Do not fully tighten yet.
3. Step 3: Attach Support Brackets (if applicable). If your table includes additional support brackets between the legs, attach them now, ensuring they are correctly oriented.
4. 4-кадам: Акыркы бекемдөө. Once all legs and supports are loosely attached, carefully turn the table upright. Ensure it is stable and level, then fully tighten all screws and bolts.

5. Колдонуу

This VECELO dining set is designed for indoor use in kitchens, dining rooms, breakfast nooks, or small spaces. The chairs are designed to fit under the table when not in use, optimizing space.

6. Техникалык тейлөө

• Тазалоо: Жарнак менен беттерди сүртүңүзamp кездеме. Финишке зыян келтирүүчү катаал химиялык заттардан же абразивдүү тазалагычтардан алыс болуңуз.
• Төгүлүүлөр: Clean up spills immediately to prevent staining, especially on the MDF tabletop.
• Катуулоо: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
• Коргоо: Use placemats or coasters to protect the tabletop from heat, scratches, and moisture.

7. Кыйынчылыктарды

7.1. Chair Seat and Back Board Assembly Issues

If you encounter difficulties with the chair seat or backrest alignment during assembly, please refer to the following video for detailed troubleshooting tips. Incorrect orientation of parts 6 and 7, or the trapezoid seat, can lead to misalignment.

7.2. Башкы Ассамблеянын кеңештери

• Туура эмес жайгаштырылган тешиктер: If screw holes do not align perfectly, loosen all screws on the affected section, adjust the parts slightly, and then re-tighten. Avoid forcing screws, as this can damage the material.
• Титиреген стол/отургучтар: Ensure all screws are fully tightened. If wobbling persists, check that all legs are on an even surface. Slight adjustments to screw tightness can sometimes resolve minor wobbles.
• Жетишпеген бөлүктөр: Double-check the accessory bag and packaging. If parts are genuinely missing, contact customer support immediately.

8. Техникалык шарттар

9. Кепилдик жана колдоо

VECELO is committed to providing quality products and customer satisfaction. If you encounter any problems with your product, including missing parts or assembly difficulties, please do not hesitate to contact our customer service team.

Электрондук почта: support@vecelo.com

Our technical support team aims to reply within 24 hours.

For information regarding protection plans, please refer to your purchase documentation or the retailer's webсайт.