1. Киришүү
The WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter is an advanced power solution designed for off-grid solar systems. It integrates a solar charge controller, inverter, and battery charger into one unit, offering a comprehensive power management system. This inverter features full digital voltage and current control with a dual closed-loop system, advanced SPWM technology for pure sine wave output, and multiple charging modes to optimize energy utilization.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Сезимтал электроника үчүн таза синус толкунунун чыгышы.
- Dual output modes: utility bypass and inverter output for uninterrupted power supply.
- Four charging modes: Solar Only, Utility Priority, Solar Priority, and Hybrid (Utility & Solar).
- Advanced MPPT technology for high solar charging efficiency.
- Configurable charging current for various battery types.
- Energy-saving mode to reduce no-load power consumption.
- Intelligent variable speed fan for effective heat dissipation and extended system life.
- Lithium battery activation design, compatible with both lead-acid and lithium batteries.
- Comprehensive 360-degree protection against overload, short circuit, and overcurrent.
- Multiple communication modules (RS485, GPRS, WiFi, USB) for remote monitoring and operation.
Сүрөт 1: Алдыңкы view of the WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter.
Figure 2: Key specifications highlighted on the inverter, including 3.6KW power, 24V system, 80A maximum charge current, 3600W maximum PV array power, and 500VDC maximum PV array voltage.
2. Орнотуу жана орнотуу
Before installation, ensure the inverter is placed in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials. The mounting surface should be sturdy enough to support the inverter's weight.
2.1 Системанын туташуу диаграммасы
The inverter can be integrated into various power systems, including solar panels, utility grid, generators, and battery banks, to power home appliances.
Figure 3: Diagram illustrating the typical connections for the hybrid solar inverter, including solar panels, a generator, the utility grid, battery packs, and various home appliances.
2.2 PV Panel Configuration
Proper configuration of your photovoltaic (PV) panels is crucial for optimal performance and safety.
Figure 4: PV configuration details for the ISolar SMX II 3.6KW, including a diagram of PV panels connected to the inverter on a rooftop, and a table specifying maximum PV panels (4000W), PV operating voltage range (120-500VDC), PV charging current range (80A), and module connection details.
Маанилүү коопсуздук эскертүүсү: Ensure all connections are secure and correctly polarized. Consult a qualified electrician for installation if you are unsure. Always disconnect all power sources before performing any wiring or maintenance.
3. Иштөө нускамалары
The inverter features an intuitive LCD screen for real-time operation monitoring and configuration.
Figure 5: The inverter's LCD screen for real-time operation display, alongside illustrations of the four available charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar Hybrid.
3.1 заряддоо режимдери
The inverter supports four distinct charging modes, allowing you to optimize energy usage based on your preferences and available power sources:
- Күн энергиясы гана: The inverter prioritizes charging batteries exclusively from solar power. The utility grid will not be used for charging.
- Негизги артыкчылык: The inverter prioritizes charging batteries from the utility grid. Solar power will be used as a secondary source if the grid is unavailable or insufficient.
- Күн энергиясынын артыкчылыгы: The inverter prioritizes charging batteries from solar power. The utility grid will only be used if solar power is insufficient or unavailable.
- Электр жана күн энергиясынын гибриди: The inverter uses both the utility grid and solar power simultaneously to charge the batteries, maximizing charging speed and efficiency.
3.2 AC Output Control
The inverter features an ON/OFF rocker switch to control the AC output. Ensure this switch is in the 'ON' position for the inverter to supply power to your loads.
3.3 Энергияны үнөмдөө режими
To reduce power consumption when no load or a very light load is connected, the inverter can be configured to operate in an energy-saving mode. Refer to the detailed settings in the full manual for activation and configuration.
4. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter.
- Тазалоо: Инвертордун сыртын мезгил-мезгили менен кургак, жумшак чүпүрөк менен тазалап туруңуз. Желдетүүчү тешиктердин чаңдан жана таштандылардан тазаланганын текшериңиз. Суюк тазалоочу каражаттарды колдонбоңуз.
- желдеткич текшерүү: The inverter uses an intelligent variable speed fan for cooling. Ensure the fan is not obstructed and operates quietly. Excessive noise or lack of operation may indicate a problem.
- Туташуу текшерүүлөрү: Annually, inspect all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion. Loose connections can lead to overheating and system failure.
- Батареянын ден соолугу: Monitor your battery bank's health according to the battery manufacturer's guidelines. Ensure proper charging parameters are set on the inverter for your specific battery type.
- Экологиялык шарттар: Ensure the inverter's operating environment remains within specified temperature and humidity ranges.
Эскертүү: Always turn off all power sources (PV, utility, battery) and wait for the inverter to fully discharge before performing any internal maintenance or inspection.
5. Кыйынчылыктарды
Бул бөлүмдө кеңири таралган көйгөйлөрдү чечүүнүн негизги кадамдары берилген. Татаалыраак көйгөйлөр үчүн кардарларды тейлөө кызматына кайрылыңыз.
- Эч кандай кубаттуулугу жок:
- Check if the AC output switch is ON.
- Verify battery connections and charge level.
- Автоматтык өчүргүчтөрдүн иштебей калганын же сактагычтардын күйүп кеткенин текшериңиз.
- Ensure PV input is sufficient if operating in solar-only modes.
- Inverter Overload Alarm:
- Туташкан жүктү азайтыңыз.
- Check for short circuits in the load wiring.
- Батарея заряддалбай жатат:
- Verify PV panel connections and ensure adequate sunlight.
- Check utility grid connection if using grid charging modes.
- Ensure battery type and charging parameters are correctly set.
- Communication Issues (WIFI/USB):
- Ensure communication modules are correctly installed.
- Check network connectivity for WIFI.
- Refer to the specific communication module manual for detailed setup.
6. Техникалык шарттар
The following table provides detailed technical specifications for the WLLKIY ISolar SMX II 3.6KW Hybrid Solar Inverter.
Figure 6: Product label displaying detailed specifications for the ISolar-SMX-II-3.6KW model.
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | WLLKIY |
| Модель аты | ISolar-SMX-II-3.6KW |
| AC Output Rated Power | 3600VA / 3600W |
| AC Output Voltage | 230Vac ±5% |
| AC чыгаруу номиналдык ток | 15.6A |
| AC Input Voltage Диапазон | (170V~280Vac)±2% or (90Vac-280Vac)±2% |
| AC киргизүү жыштыгы | 50Hz / 60Hz (Auto sensing) |
| Max. AC Bypass Overload Current | 30A |
| Батарея номиналдык Voltage | 24VDC |
| Батарея Voltage Диапазон | 20-33VDC |
| Макс. AC кубаттоо тогу | 80A |
| Макс. PV Array күчү | 4000 Вт |
| Max. PV Array Open Voltage (VOC) | 500VDC |
| MPPT Input Voltage Диапазон | 120-450VDC |
| Макс. PV киргизүү агымы | 13A |
| Макс. Күндүн заряды | 80A |
| Efficiency (Bypass and Inverter) | >95% |
| Switching Time (Bypass and Inverter) | 10 мс (типтүү) |
| Иштөө температурасы диапазону | -15°Cден 55°Cге чейин (45°Cден жогору төмөндөтүү) |
| IP даражасы | IP20 |
| Коопсуздук классы | I |
7. Кепилдик жана колдоо
For warranty information and technical support, please refer to the documentation provided with your purchase or contact WLLKIY customer service. Ensure you have your product model number (ISolar SMX II 3.6KW) and purchase details available when seeking support.