Introduction
This instruction manual provides essential information for the safe and effective assembly, operation, and maintenance of your SONICAKE QDT-30 Hydraulic Height Adjustable Drum Throne. Please read this manual thoroughly before use and retain it for future reference.
Коопсуздук маалыматы
ЭСКЕРТҮҮ:
- Always ensure all components are securely fastened before use. Improper assembly can lead to instability and potential injury.
- Do not exceed the maximum weight capacity of 440 lbs (200 kg). Exceeding this limit may cause damage to the product or personal injury.
- Бийиктикти тууралоодо колду жана манжаларды кыймылдуу бөлүктөрдөн алыс кармаңыз.
- Use the drum throne on a flat, stable surface to prevent tipping.
- Regularly inspect the drum throne for any signs of wear, damage, or loose components. Discontinue use if any issues are found and contact customer support.
Пакеттин мазмуну
Сиздин пакетиңизде төмөнкү компоненттердин бардыгы камтылганын текшериңиз:
- 1x Seat Cushion (with hydraulic lever attached)
- 1x Арты
- 1x Hydraulic Base/Stand Assembly (with legs and anti-slip feet)
- 2x Backrest Attachment Screws
- 2x жуугучтар
Орнотуу жана чогултуу
Follow these steps to assemble your drum throne:
- Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging and place them on a clean, flat surface. Refer to the "Package Contents" section to ensure all parts are present.
- Аркасын отургучка бекитүү:
- Locate the mounting bracket on the underside of the seat cushion and the corresponding attachment point on the backrest.
- Align the backrest with the bracket.
- Insert the two backrest attachment screws through the washers and then through the bracket holes into the backrest. Tighten securely by hand. Do not overtighten.
Сүрөт: Жакын план view of the backrest attachment point on the underside of the seat, showing the screws and mechanism for securing the backrest. - Attach Seat Assembly to Hydraulic Base:
- Place the hydraulic base/stand on a stable surface with the legs fully extended.
- Carefully place the assembled seat (with backrest) onto the top of the hydraulic cylinder of the base. Ensure it is seated firmly and centrally.
- Туруктуулукту текшерүү: Gently test the stability of the assembled drum throne before sitting on it. Ensure all connections are tight and the base legs are fully spread.
Иштөө нускамалары
Бийиктигин тууралоо
The SONICAKE QDT-30 features a hydraulic mechanism for quick and effortless height adjustment.
- Орунду көтөрүү үчүн: While standing, pull the hydraulic lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- Орундукту түшүрүү үчүн: While seated, pull the hydraulic lever upwards. The seat will lower under your body weight. Release the lever when the desired height is reached.
The adjustable height range is approximately 45 cm (17.7 inches) to 60 cm (23.6 inches).
Артканы тууралоо
The backrest can be adjusted for optimal ergonomic support.
- To Adjust Backrest Position: Loosen the backrest attachment screws located on the underside of the seat. Adjust the backrest forwards or backwards to your preferred position. Once adjusted, securely tighten the screws to lock the backrest in place.
- The backrest is designed to conform to the natural curvature of the human body, providing excellent lumbar support.
Техникалык тейлөө
- Тазалоо: Wipe the leather fabric seat and backrest with a soft, damp cloth. For stubborn stains, use a mild soap solution and dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Аппараттык камсыздоону текшерүү: Periodically check all screws and bolts, especially those securing the backrest and the seat to the base, to ensure they remain tight. Tighten if necessary.
- Гидротехникалык система: The hydraulic system is generally maintenance-free. If you notice any issues with height adjustment, ensure the lever is functioning correctly and there are no obstructions.
- Тайгалоого каршы буттар: Ensure the anti-slip rubber pads on the base legs are clean and free from debris to maintain optimal grip.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Seat does not raise or lower smoothly. | Hydraulic lever stuck or obstructed; hydraulic cylinder issue. | Check if the hydraulic lever moves freely. Ensure no obstructions are preventing movement. If the issue persists, contact customer support. |
| Drum throne feels unstable or wobbly. | Loose assembly screws; uneven surface; damaged base. | Ensure all assembly screws (especially backrest and seat-to-base connections) are securely tightened. Verify the drum throne is on a flat, level surface. Inspect the base legs for any damage. |
| Backrest moves or feels loose. | Жөлөнгүчтүн бекитүүчү бурамалары бошоп калган. | Tighten the backrest attachment screws firmly. |
Продукт спецификациялары
- Модел: QDT-30
- Бренд: SONICAKE
- Түсү: Кара
- Жөнгө салынуучу бийиктик диапазону: 45 см - 60 см (17.7 дюйм - 23.6 дюйм)
- Продукциянын өлчөмдөрү: 40 cm (D) x 47 cm (W) x 29 cm (H) (seat dimensions)
- Салмак сыйымдуулугу: 200 кг чейин (440 фунт)
- Материалдар: Leather fabric (seat/backrest), Stainless Steel (frame/base)
- Элемент Салмагы: 7.7 кг
Кепилдик маалымат
Specific warranty details may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding warranty coverage and terms.
Кардарларды колдоо
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please contact SONICAKE customer support or your authorized retailer. Please have your model number (QDT-30) and purchase information ready when contacting support.
For more information about SONICAKE products, visit the official SONICAKE webсайт.