BONTEC MDM001A

BONTEC Single Monitor Desk Mount MDM001A Instruction Manual

Model: MDM001A

Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your BONTEC Single Monitor Desk Mount MDM001A. Please read this manual thoroughly before installation and retain it for future reference.

Маанилүү коопсуздук маалыматы

  • Салмак сыйымдуулугу: Do not exceed the maximum weight capacity of 22 lbs (10 kg). Overloading may result in property damage or personal injury.
  • Экрандын өлчөмү: This mount is designed for monitors between 13 and 34 inches.
  • VESA шайкештиги: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm.
  • Столдун туруктуулугу: Verify that your desk surface is stable and strong enough to support the combined weight of the mount and your monitor.
  • Орнотуу: Follow all installation steps carefully. If you are unsure about any part of the installation, seek professional assistance.
  • Кыймылдуу бөлүктөр: Be cautious when adjusting the mount to avoid pinching fingers or other body parts.

Пакеттин мазмуну

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.

  • Монитор курал ассамблеясы
  • Desk Clamp Компонент
  • Тырмакчанын негизинин компоненти
  • VESA плитасы
  • Аппараттык комплект (буроолор, шайбалар, бөлгүчтөр)
  • Аллен Keys
  • Кабелдик башкаруу клиптери
BONTEC Single Monitor Desk Mount MDM001A with monitor attached, showing desk clamp жана тешикчелердин негизинин варианттары.

Сүрөт: бүттүview of the BONTEC Single Monitor Desk Mount MDM001A, illustrating the main components and both desk clamp and grommet base installation options.

Орнотуу жана орнотуу

The BONTEC Single Monitor Desk Mount offers two installation methods: Desk Clamp жана Grommet Base. Үстөлүңүзгө эң ылайыктуу ыкманы тандаңыз.

Шайкештикти текшерүү

  • Монитордун өлчөмү: 13-34 дюйм
  • Монитор Салмагы: 22 фунтка чейин (10 кг)
  • VESA үлгүлөрү: 75x75mm же 100x100mm
Diagram illustrating the BONTEC monitor mount's compatibility with 13-34 inch screens, 22lbs max capacity, and VESA 75x75mm and 100x100mm.

Image: Visual representation of monitor compatibility requirements, including screen size, weight, and VESA patterns.

Орнотуу ыкмалары

Illustration of the two installation methods for the BONTEC monitor mount: desk clamp and grommet base, with specified desk thickness and hole diameter ranges.

Image: Detailed illustration comparing the Desk Clamp and Grommet Base installation methods, including compatible desk thickness and hole diameter specifications.

Method 1: Desk Clamp Орнотуу

  1. Үстөлдү тиркөө clamp component to the main pole.
  2. Клamp столуңуздун четинде. Үстөлдүн калыңдыгы 0.39" жана 3.35" ортосунда болушу керек.
  3. Клamp screw firmly until the mount is securely fixed to the desk.

Method 2: Grommet Base Installation

  1. If your desk has a bolt-through hole, ensure its diameter is between 0.39" and 3.35" and the desk thickness is between 0.39" and 3.15".
  2. Disassemble the desk clamp and use the grommet base plate and screw.
  3. Insert the grommet screw through the desk hole and secure it from underneath with the provided nut.
  4. Негизги түркүктү громметтин негизине бекитиңиз.

Мониторду тиркөө

  1. Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure a secure fit.
  2. Carefully slide the monitor (with the attached VESA plate) onto the mounting head of the arm.
  3. Tighten any security screws on the mounting head to prevent accidental dislodging.

Иштөө жана тууралоо

The BONTEC monitor mount offers various adjustments to optimize your viewтажрыйба жана эргономикалык турпат.

Бийиктигин тууралоо

The monitor can be raised or lowered along the 16.73-inch pole. Loosen the collar on the pole, adjust the monitor to the desired height, and then re-tighten the collar to secure its position.

Side view of the BONTEC monitor mount demonstrating the 16.73 inch height adjustment range.

Image: Illustration of the monitor mount's vertical height adjustment capability along the central pole.

Эңкейтүү, айлануу жана айлануу

The special swivel head design allows for flexible positioning:

  • Россия: Adjust the screen vertically by ±15° to reduce glare and find the optimal viewбурч.
  • Айлануучу: Rotate the monitor horizontally up to 360° to share your screen or change viewбагыт.
  • Айлануу: Rotate the screen 360° from landscape to portrait mode for different tasks.

After adjusting the angle, use the back screw lock on the VESA plate to provide extra security and maintain the desired position.

Diagram showing the BONTEC monitor mount's tilt (±15°), swivel (360°), and rotation (360°) capabilities.

Image: Visual guide to the tilt, swivel, and rotation adjustments available on the monitor mount.

Кабель башкаруу

Utilize the integrated cable management clips along the pole to route and organize your monitor cables. This helps maintain a tidy workspace and prevents cable clutter.

An integrated storage slot for Allen keys is also provided on the pole for convenient access to adjustment tools.

Image showing the integrated cable management system and storage slot for Allen keys on the BONTEC monitor mount.

Сүрөт: Жакын план view of the cable management clips and the Allen key storage slot on the mount's pole.

Техникалык тейлөө

  • Тазалоо: Орноткучту жумшак, d менен тазалаңызamp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
  • Мезгилдүү текшерүүлөр: Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда. Керек болсо кайра тартыңыз.
  • Майлоо: Бул продукт үчүн, адатта, майлоо талап кылынбайт.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Монитор салбырап турат же позициясын кармабайт.Mounting screws are loose; monitor weight exceeds capacity.Ensure all screws, especially the back screw lock on the VESA plate, are tightened. Verify monitor weight is within 22 lbs (10 kg).
Mount is unstable on the desk.Үстөл clamp/grommet base is not tightened sufficiently.Үстөлдү кайра бекемдөө clamp or grommet base screw. Ensure desk thickness is within specified limits.
Difficulty adjusting monitor height.Height adjustment collar is too tight.Loosen the height adjustment collar on the pole before attempting to adjust height. Re-tighten once desired height is achieved.
Cables are messy.Кабелдик башкаруу колдонулган эмес.Route cables through the integrated cable management clips on the pole.

Техникалык шарттар

  • Бренд: BONTEC
  • Модел: MDM001A
  • Экрандын өлчөмү шайкештиги: 13-34 дюйм
  • Салмак сыйымдуулугу: 22 фунт (10 кг)
  • VESA шайкештиги: 75x75мм, 100x100мм
  • Жантайма диапазону: ±15°
  • Айлануу диапазону: 360°
  • Айлануу: 360°
  • Бийиктигин тууралоо: Up to 16.73 inches (along pole)
  • Desk Clamp Калыңдыгы: 0.39" - 3.35"
  • Grommet Base Desk Thickness: 0.39" - 3.15"
  • Громмет тешигинин диаметри: 0.39" - 3.35"
  • Материал: Металл
  • Түсү: Кара

Кепилдик жана колдоо

Specific warranty details are not provided within this manual. For warranty information, technical support, or to inquire about replacement parts, please visit the official BONTEC webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз.

Webсайт: BONTEC Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.