Lutec Solar Wall Lamp Inka Anthracite - Model 6989101118 User Manual

1. Киришүү

Thank you for choosing the Lutec Inka Solar Wall Lamp, model 6989101118. This modern outdoor lighting fixture is designed to provide efficient and sustainable illumination using solar power. Constructed from durable aluminum and featuring an integrated LED light source, it emits a warm white light (3000K) and is rated IP44 for outdoor use. This manual provides essential information for the safe and effective installation, operation, and maintenance of your solar wall lamp.

1.1-сүрөт: The Lutec Inka Solar Wall Lamp installed on an exterior brick wall, showcasing its warm illumination.

2. Коопсуздук маалыматы

Орнотуудан жана колдонуудан мурун бардык коопсуздук нускамаларын окуп чыгыңыз. Бул колдонмону келечектеги маалымат үчүн сактаңыз.

• Ensure the mounting surface is structurally sound and can support the weight of the lamp (2 кг).
• Do not attempt to open, disassemble, or modify the lamp. Бул кепилдикти жокко чыгарып, коопсуздук коркунучун жаратышы мүмкүн.
• l сактаңызamp күйүүчү материалдардан алыс.
• This product is designed for outdoor use with an IP44 rating, protecting against solid objects larger than 1mm and splashing water from any direction. However, do not submerge the lamp сууда.
• Жарык күйүп турганда LED жарык булагына тике карабаңыз.
• Dispose of the product and its integrated battery responsibly according to local regulations at the end of its lifespan.

3. Пакеттин мазмуну

Орнотууну улантуудан мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.

• 1 x Lutec Inka Solar Wall Lamp (Модель 6989101118)
• 1 x Mounting Hardware Kit (screws, wall plugs)
• 1 х Колдонуучунун колдонмосу (бул документ)

4. Орнотуу жана орнотуу

4.1 Керектүү куралдар

• Карандаш
• Өлчөө лентасы
• Дубал штепсельдерине ылайыктуу бургу менен бургула
• Screwdriver

4.2 Монтаждоо ордун тандоо

For optimal performance, select a location that receives direct sunlight for at least 6-8 hours daily. Avoid areas under eaves, trees, or other obstructions that may shade the solar panel. Ensure the chosen surface is flat and stable.

4.1-сүрөт: Product dimensions for installation planning. The lamp measures approximately 18 cm in length and 9 cm in height/depth.

4.3 Орнотуу кадамдары

1. Монтаждоо бетин даярдаңыз: Clean the area where the lamp орнотулат.
2. Бургулоо пункттарын белгилөө: L кармаңызamp or its mounting bracket against the wall at the desired height and use a pencil to mark the positions for the mounting screws.
3. Бургулоо тешиктери: Using the appropriate drill bit for your wall type, drill holes at the marked positions.
4. Дубалга сайгычтарды салуу: Insert the provided wall plugs into the drilled holes until they are flush with the wall surface.
5. Л тоосуamp: l тегиздөөamp's mounting holes with the wall plugs. Insert the screws through the lamp and into the wall plugs. Tighten the screws securely, ensuring the lamp is firmly attached to the wall. Do not overtighten.

5. Иштөө нускамалары

5.1 Баштапкы төлөм

Before first use, allow the solar lamp to charge in direct sunlight for a minimum of 8-10 hours with the switch in the 'OFF' position. This ensures the integrated battery is fully charged for optimal performance.

5.2 Иштөө режимдерин орнотуу

The Lutec Inka Solar Wall Lamp features a control switch located on the underside of the unit, allowing you to select different brightness modes or turn the lamp off. The lamp automatically activates at dusk and deactivates at dawn when a mode is selected.

5.1-сүрөт: Detail of the control switch for selecting operating modes.

• ӨЧҮК: лamp is completely off and will not illuminate. This position is recommended for initial charging or extended storage.
• L (Low Brightness): лamp will illuminate at a low brightness level from dusk until dawn, provided there is sufficient battery charge.
• M (Medium Brightness): лamp will illuminate at a medium brightness level from dusk until dawn, provided there is sufficient battery charge.
• H (High Brightness): лamp will illuminate at a high brightness level from dusk until dawn, provided there is sufficient battery charge. This mode consumes the most power and may result in shorter illumination times if the battery is not fully charged.

Select the desired mode by sliding the switch to the corresponding position. The lamp will then operate automatically based on ambient light conditions.

6. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the lifespan of your solar wall lamp.

• Күн панелин тазалоо: Мезгил-мезгили менен күн панелин жумшак, гamp cloth to remove dust, dirt, and debris. A clean solar panel ensures maximum sunlight absorption and efficient battery charging.
• Тазалоо Лamp Дене: Clean the aluminum body with a soft, damp кездеме. Абразивдүү тазалагычтарды, эриткичтерди же катуу химиялык заттарды колдонбоңуз, анткени алар финишке зыян келтириши мүмкүн.
• Батареяга кам көрүү: лamp contains an integrated, non-replaceable battery. For best battery life, ensure the lamp receives regular sunlight exposure. Avoid prolonged storage in a completely discharged state.
• Текшерүү: Мезгил-мезгили менен монтаждоо бурамаларын текшерип туруңуз, алар бекем жана бекем бойдон калууда.

7. Кыйынчылыктарды

If you experience issues with your Lutec Inka Solar Wall Lamp, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

Бул чечимдерди колдонуу аракетинен кийин көйгөй чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For information regarding warranty coverage, please refer to the terms and conditions provided by your retailer or visit the official Lutec website. If you require technical assistance or have questions not covered in this manual, please contact Lutec customer support or your point of purchase.

Lutec Webсайт: www.lutec.com