DC Brushless Gear Motor User Manual

1. Киришүү

This manual provides essential information for the safe and efficient operation of your DC Brushless Gear Motor. This motor is designed for various applications requiring precise and reliable rotational power, featuring a compact design and robust performance. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Коопсуздук маалыматы

Always observe the following safety precautions to prevent injury or damage to the motor or connected equipment:

• Электр камсыздоо: электр менен жабдууну камсыз кылуу voltage and current match the motor's specifications (12V or 24V DC). Incorrect voltage моторун бузушу мүмкүн.
• Зымдар: Connect wiring correctly according to the provided diagrams. Incorrect wiring can lead to malfunction or damage.
• Ашыкча жүктөн коргоо: Do not exceed the motor's rated continuous current. Implement appropriate overload protection in your system if necessary.
• Жылуулук таркатылышы: Ensure adequate ventilation around the motor to prevent overheating, especially during prolonged operation or high loads.
• Механикалык коркунучтар: Колдорду, кийимдерди жана башка буюмдарды иштетүү учурунда айлануучу бөлүктөрдөн алыс кармаңыз.
• Курчап турган чөйрө: Operate the motor in a clean, dry environment, free from excessive dust, moisture, and corrosive gases.
• Демонтаж: Do not attempt to disassemble or modify the motor. This will void the warranty and may cause damage or injury.

3. Продукт бүтүп калдыview жана компоненттер

The DC Brushless Gear Motor is a robust power unit designed for various industrial and hobby applications. It integrates a brushless DC motor with a reduction gearbox to provide high torque at lower speeds.

Негизги өзгөчөлүктөрү:

• Brushless DC design for long lifespan and high efficiency.
• Integrated gear reduction for increased torque output.
• Available in 12V and 24V configurations.
• Compact 37mm diameter.
• Drip-proof protection feature.
• Continuous Current(A): 0.08 - 0.41A (depending on model and load).

Мотор Views:

4. Орнотуу жана орнотуу

Proper installation is crucial for the motor's performance and longevity. Follow these general guidelines:

1. Монтаждоо: Securely mount the motor using the provided mounting holes on the front flange. Ensure the mounting surface is flat and rigid to prevent vibration.
2. Валдын туташуусу: Connect the load to the output shaft using a suitable coupling. Ensure the coupling is properly aligned to avoid excessive radial or axial loads on the shaft.
3. Зымдар:
   • Identify the power input wires (typically red for positive, black for negative).
   • Connect these to a stable DC power supply matching the motor's voltage (12V же 24V).
   • For brushless motors, additional wires are typically for Hall sensors and control signals (e.g., speed control, direction). Refer to your specific motor's wiring diagram or controller manual for precise connections.
   • Кыска туташуунун алдын алуу үчүн бардык туташуулардын коопсуз жана изоляцияланганын текшериңиз.
4. Контроллер интеграциясы: If using an external motor controller (ESC), connect the motor's phase wires and Hall sensor wires to the controller as per the controller's instructions.
5. Баштапкы сыноо: Before full operation, perform a low-power test to verify correct rotation and functionality.

5. Иштөө нускамалары

Once installed and wired correctly, the motor can be operated. The specific control method depends on your application and chosen motor controller.

1. Күйгүзүү: Apply the specified DC voltage to the motor's power input. If using a controller, power on the controller first.
2. Ылдамдыкты көзөмөлдөө: Adjust the motor speed using your connected motor controller or power supply. Brushless DC motors typically use Pulse Width Modulation (PWM) for speed control.
3. Багыт көзөмөлдөө: The direction of rotation can usually be reversed by swapping two of the three phase wires (for sensorless motors) or by a specific signal from your motor controller (for sensored motors). Consult your controller's manual.
4. Мониторинг: During operation, monitor the motor for unusual noises, excessive heat, or vibrations. Discontinue use if any abnormal conditions are observed.
5. Токтотуу: Reduce the power input or signal to the controller to stop the motor.

6. Техникалык тейлөө

The DC Brushless Gear Motor is designed for low maintenance. However, periodic checks can extend its lifespan:

• Тазалоо: Keep the motor clean and free from dust, dirt, and debris. Use a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Текшерүү: Periodically inspect the motor for any signs of wear, damage, or loose connections. Check the output shaft for excessive play.
• Майлоо: The gearbox is typically sealed and pre-lubricated for life. Do not attempt to lubricate unless specifically instructed by the manufacturer.
• Вентиляция: Ensure that ventilation openings (if any) are not obstructed.

7. Кыйынчылыктарды

Эгерде сиз моторуңузда көйгөйлөргө туш болсоңуз, төмөнкү кеңири таралган көйгөйлөрдү жана чечимдерди караңыз:

8. Техникалык шарттар

Note: Specific RPM values (10/20/35/65/100/150/200/300/600/1000 RPM) depend on the specific variant purchased. The current model is specified as 600rpm / 12V.

9. Кепилдик жана колдоо

This product is manufactured by Nastyaer. For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Please have your product model number (37GB-BL3625) and purchase details ready when contacting support.

For general inquiries, refer to the product listing on Amazon.com or contact Generic customer service.