Introduction
This instruction manual provides essential information for the proper use and maintenance of your Amazon Basics ABS 3D Printer Filament. Acrylonitrile Butadiene Styrene (ABS) is a robust thermoplastic material known for its strength and heat resistance, making it suitable for durable 3D printed objects. Adhering to these guidelines will help ensure optimal printing results and prolong the life of your filament.
Продукт өзгөчөлүктөрү
- Filament for 3D printers (1.75 mm diameter, white, 1 kg spool). Designed to fit most standard 3D printers (verify spool size for compatibility).
- Made from ABS, a strong thermoplastic material commonly used for creating durable objects requiring high heat resistance.
- Integrated indicator on spools shows the percentage of material remaining and approximate remaining length.
- Designed to reduce clogging; keep dry and away from UV light.
- Note: Proper configuration of your 3D printer settings is crucial for successful printing.
Жайгашуу
Before beginning your 3D print, ensure your printer is properly calibrated and prepared for ABS filament. ABS requires specific environmental conditions for successful printing.
- Жипчени ачып алыңыз: Carefully remove the filament spool from its packaging. The spool is typically vacuum-sealed with a desiccant packet to prevent moisture absorption.
- Filament жүктөө: Follow your 3D printer's instructions for loading new filament. Ensure the filament feeds smoothly into the extruder without tangling.
- Принтер чөйрөсү: ABS is prone to warping due to temperature fluctuations. It is highly recommended to print in an enclosed environment or with a printer enclosure to maintain a stable temperature around the print bed and object.
- Bed Adhesion: Prepare your print bed for optimal adhesion. Common methods include using an adhesive (e.g., ABS slurry, glue stick, hairspray) or a specialized print surface designed for ABS.
Image: A white spool of Amazon Basics ABS 3D printer filament, 1.75mm diameter, 1kg weight. This is the main product view.
Operating (Printing Parameters)
Optimal printing parameters can vary depending on your specific 3D printer model and environmental conditions. The following are recommended starting points:
| Параметр | Сунушталган диапазон |
|---|---|
| Сопло температурасы | 235°C - 255°C |
| Жылытылган керебеттин температурасы | 90°C - 110°C |
| Filament диаметри | 1.75 мм |
| Таза Салмак | 1 кг |
Always perform small test prints to fine-tune settings for your specific printer and desired print quality. Adjust settings incrementally.
Image: The back of the Amazon Basics ABS filament spool, displaying recommended printing temperatures for nozzle (235-255°C) and bed (90-110°C), along with filament diameter and net weight.
Техникалык тейлөө
Proper storage of your ABS filament is crucial to maintain its quality and prevent printing issues.
- Кургак кармоо: ABS filament is hygroscopic, meaning it absorbs moisture from the air. Store unused filament in a dry, airtight container with desiccant packets.
- Protect from UV Light: Exposure to ultraviolet (UV) light can degrade the filament over time, affecting its strength and printability. Store filament in a dark place or in opaque containers.
- Чаташтырбоо: Always secure the end of the filament to the spool when not in use to prevent tangles, which can lead to print failures.
Сүрөт: Жакын пландан жасалган тарап view of the white ABS filament neatly wound on its spool, illustrating proper winding and filament consistency.
Жалпы көйгөйлөрдү чечүү
Here are solutions to common problems encountered when printing with ABS filament:
| Маселе | Мүмкүн болгон себеп / Чечим |
|---|---|
| Төшөктүн кыйшайышы / начар адгезияланышы |
|
| Clogging / Extrusion Issues |
|
| Layer Separation / Weak Prints |
|
Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Бренд | Amazon негиздери |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Түс | Ак |
| Элемент Салмагы | 1.39 Kilograms (including spool) |
| Filament диаметри | 1.75 миллиметр |
| Таза Filament Салмагы | 1 кг |
| Модель номери | ABS175WH11000C |
| GTIN / UPC | 840095870306, 840095800044 |
| Келип чыккан өлкө | Польша |
Image: A diagram illustrating the dimensions of the Amazon Basics ABS filament spool, including its diameter (200mm / 7.87 inches) and width (80mm / 3.14 inches).
Кепилдик жана колдоо
Кепилдик жөнүндө маалымат же продуктуну колдоо үчүн, Amazon Basics расмий сайтына кайрылыңыз webсайтына кириңиз же Amazon кардарларды тейлөө кызматына түз кайрылыңыз. Кепилдик боюнча дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактап коюңуз.
Кошумча ресурстар жана продукт маалыматы үчүн, баш багыңыз Amazon Basics дүкөнү.
