1. Продукт бүтүп калдыview
The ELECTOP Car Solar Power Simulated Dummy Alarm is designed to act as a visual deterrent against potential vehicle theft. It simulates the presence of a car alarm system with a flashing LED light, making your vehicle appear less appealing to thieves. This device is powered by solar energy and includes a USB charging port for backup, ensuring continuous operation.
Сүрөт 1.1: Бүттүview of the ELECTOP Simulated Dummy Alarm units.
Image 1.2: The dummy alarm light installed, effectively deterring with its flashing light.
2. Негизги өзгөчөлүктөрү
- Көрүү тоскоолдугу: Designed to deter malicious intentions by simulating an active car alarm.
- Күн энергиясы: Automatically charges in sunlight, allowing for all-night operation after sufficient daytime charging.
- Кош кубаттоо: Features a convenient USB charging port for backup power during overcast or rainy days.
- Камтылган жарык сенсору: Intelligently senses light intensity, blinking every 5 seconds when the switch is on and light is dim.
- Оңой орнотуу: Equipped with strong double-sided tape for effortless mounting on various surfaces.
Image 2.1: Built-in light sensor functionality, showing day and night operation.
Image 2.2: Component breakdown and dimensions of the dummy alarm light.
3. Пакеттин мазмуну
Ар бир пакетте төмөнкү элементтер бар:
- 4 x ELECTOP Car Solar Power Simulated Dummy Alarm units (Blue Light)
4. Орнотуу жана орнотуу
The ELECTOP dummy alarm light is designed for simple and quick installation. Follow these steps for optimal adhesion and performance:
- Жайгашкан жерди тандаңыз: Select a suitable surface in your car such as the rearview mirror, center console, car door, or rear window.
- Бетти тазалоо: Ensure the chosen surface is clean, dry, and free from dust or grease. Use an alcohol wipe if necessary and allow it to dry completely.
- Пил клейси: Carefully peel off the protective film from the strong double-sided tape on the bottom of the dummy alarm unit.
- Агрегатты орнотуу: Firmly press the unit onto the cleaned surface for several seconds to ensure strong adhesion.
Сүрөт 4.1: Мисamples of easy installation locations within a vehicle.
5. Иштөө нускамалары
The dummy alarm light operates automatically based on light conditions and its charge level.
- Автоматтык иштетүү: Once installed and the switch is turned on, the built-in light sensor will detect ambient light.
- Daytime Behavior: The LED will not blink when there is sufficient light (e.g., during the day) to conserve power.
- Nighttime Behavior: When the light is dim (e.g., at night or in a dark garage), the LED will automatically begin to blink every 5 seconds.
- Кол менен башкаруу: To stop the device from working, simply turn off the switch located on the unit.
- Күн кубаты: The unit will automatically charge its internal battery when exposed to sunlight. Ensure the solar panel faces an area that receives adequate light.
- USB заряддоо: For situations with prolonged low light or if additional charging is needed, connect a standard Micro USB cable to the charging port.
Image 5.1: Solar charging in action on a car dashboard.
6. Техникалык тейлөө
To ensure the longevity and optimal performance of your ELECTOP Car Solar Power Simulated Dummy Alarm, follow these simple maintenance guidelines:
- Күн панелин таза кармаңыз: Дайыма күн панелин жумшак менен сүртүп, гamp күн нурунун сиңишине тоскоол боло турган чаңды, кирди же калдыктарды тазалоо үчүн кездеме.
- Катуу химиялык заттардан алыс болуңуз: Do not use abrasive cleaners or solvents on the unit, as they may damage the surface or internal components.
- Адгезияны текшерүү: Periodically check the double-sided tape for secure adhesion, especially after extreme temperature changes. Reapply if necessary.
- Зарылчылыгына жараша заряддоо: If the unit does not blink consistently at night, it may require a full charge via the USB port, particularly during extended periods of cloudy weather.
7. Кыйынчылыктарды
If you encounter any issues with your ELECTOP dummy alarm light, refer to the following table for common problems and their solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| LED does not blink at night. | Insufficient charge; Switch is off; Too much ambient light. | Ensure solar panel receives direct sunlight during the day or charge via USB. Turn the switch to the 'on' position. Move to a darker location or partially cover the light sensor if blinking is desired in dim light. |
| LED blinks during the day. | Light sensor is covered or in a dark area. | Relocate the unit to an area with sufficient light or ensure the light sensor is not obstructed. |
| Unit falls off after installation. | Surface was not clean/dry; Tape adhesion weakened. | Clean the surface thoroughly before reapplication. Use new double-sided tape if the original adhesive is no longer strong. |
8. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Бренд | ЭЛЕКТОП |
| Модел | Simulated Dummy Alarm |
| Ачык түс | Көк |
| Power Source | Solar, USB Charging |
| Өлчөмдөрү (болжол менен) | 2.16 x 0.98 x 0.59 дюйм |
| Элемент Салмагы | 2.08 унция (бирдигине) |
| Материал | ABS |
| Келип чыккан өлкө | Кытай |
9. Кепилдик жана колдоо
The ELECTOP Car Solar Power Simulated Dummy Alarm comes with a 1 жылдык Өндүрүүчүнүн Кепилдиги.
For any questions, assistance, or warranty claims, please contact ELECTOP customer service through the platform where the product was purchased. Please have your order number and product details ready when contacting support.