PEAKMETER PM6811 Digital Wood Moisture Meter User Manual

1. Киришүү

Thank you for choosing the PEAKMETER PM6811 Digital Wood Moisture Meter. This device is designed for rapid and accurate measurement of moisture content in wood, cardboard, and other wood fiber products. It features a high-performance microcontroller, environmental temperature compensation, and a large LCD screen for intuitive readings. Please read this manual thoroughly before operation to ensure safe and correct usage.

2. Коопсуздук маалыматы

• Always handle the meter with care. The metal probes are sharp.
• Do not attempt to measure live electrical circuits. This device is not designed for electrical measurements.
• Түзмөктү бузулуп калбашы үчүн, аны суудан жана нымдуулугу жогору чөйрөдөн алыс кармаңыз.
• Do not expose the meter to extreme temperatures or direct sunlight for extended periods.
• Replace batteries promptly when the low-battery indicator appears to ensure accurate readings.
• Батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.

3. Продукт бүтүп калдыview

The PEAKMETER PM6811 is a portable digital moisture meter. Familiarize yourself with its components and controls.

Figure 1: PEAKMETER PM6811 with labeled components. This image shows the high-sensitivity metal probes, LCD screen with backlight, protective cover, power button, species selection button/temperature switch button, and backlight/mode button.

3.1 Негизги өзгөчөлүктөрү

• High-sensitivity metal probes for accurate measurements.
• Large LCD screen with backlight for clear readings.
• Four selectable wood species types for improved accuracy.
• Environmental temperature and humidity detection.
• Маалыматты кармоо функциясы.
• Automatic shutdown after 5 minutes of inactivity (can be disabled).
• Low-battery indication.
• Max/Min measured value display.

4. Техникалык шарттар

Жалпы мүнөздөмөлөр

• Display Maximum Value: 99.9%
• Дайындарды кармоо: Ооба
• Арткы жарык: Manual ON/OFF, automatic OFF after approx. 15s
• Автоматтык түрдө өчүрүү: Default enabled (5 minutes inactivity), can be disabled
• Low-battery Indication: Yes (at <2.4V)
• Электр камсыздоо: 4 × 1.5V AAA батареялары
• Өлчөмдөрү: 300 мм × 96 мм × 50 мм
• Таза Салмагы: 560g (батареялары жок)
• Коопсуздук рейтинги: EN61010-1, EN61010-2-032, EN61326, CAT III 600V

5. Орнотуу

5.1 Батареяны орнотуу

1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Бөлүктү ачуу үчүн капкакты жылдырыңыз же ачыңыз.
3. Insert 4 × 1.5V AAA batteries, ensuring correct polarity (+/-).
4. Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.

Figure 2: Battery compartment with AAA batteries installed. Ensure correct polarity when inserting batteries.

5.2 Баштапкы күйгүзүү

басыңыз КҮЧ button to turn on the device. The LCD screen will illuminate, and the device will perform a self-test before displaying the current environmental temperature and humidity.

6. Иштөө нускамалары

6.1 Ченөө

1. Remove the protective cover from the probes.
2. Түзмөк күйгүзүлгөнүн текшериңиз.
3. Carefully insert the metal probes into the material to be measured (wood, cardboard, etc.). Ensure both probes penetrate the material sufficiently for accurate contact.
4. The moisture content percentage LCD экранында көрсөтүлөт.
5. After measurement, withdraw the probes and replace the protective cover.

6.2 Wood Species Selection

The PM6811 offers four wood species types to improve measurement accuracy for different wood densities.

• басыңыз РЕЖИМ button repeatedly to cycle through the four wood species types (indicated by an icon or number on the display).
• Refer to the device's internal calibration or a separate wood species chart for guidance on which type corresponds to your specific wood material.

6.3 Маалыматты кармоо функциясы

Дисплейдеги учурдагы окууну токтотуу үчүн:

• басыңыз БЕРҮҮ button during measurement. The "HOLD" icon will appear on the screen.
• басыңыз БЕРҮҮ button again to release the data hold and resume live readings.

6.4 Жарыкты башкаруу

The backlight improves visibility in low-light conditions.

• басыңыз РЕЖИМ button briefly to turn the backlight ON or OFF.
• The backlight will automatically turn off after approximately 15 seconds of inactivity to conserve battery power.

6.5 Temperature Unit Switch (°C/°F)

To switch between Celsius and Fahrenheit for temperature readings:

• басыңыз °F/°C button to toggle the temperature unit.

6.6 Автоматтык өчүрүү

The device is equipped with an automatic shutdown feature to save battery life. If no action is performed within 5 minutes, the meter will power off automatically.

• To disable auto-off: While the device is OFF, press and hold the БЕРҮҮ баскычын, андан кийин басыңыз КҮЧ button simultaneously until "OFF" or a similar indicator appears, signifying auto-off is disabled. Repeat the process to re-enable.

7. Техникалык тейлөө

• Тазалоо: Аппаратты кургак, жумшак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Сактагыч: When not in use for extended periods, remove the batteries to prevent leakage. Store the meter in a cool, dry place with the protective probe cover in place.
• Пробка кам көрүү: Keep the probes clean and free from debris. If they become bent or damaged, they may affect measurement accuracy.

8. Кыйынчылыктарды

9. Кепилдик жана колдоо

This PEAKMETER product is designed for reliability and durability. For specific warranty information, please refer to the warranty card included with your purchase or contact your retailer. For technical support or service inquiries, please contact PEAKMETER customer service through their official webсайтты же продуктуңуз менен берилген байланыш маалыматын.

Note: The EU Spare Part Availability Duration is 1 Year.