Zerone S866 Electric LCD Display Panel User Manual

1. Киришүү

Thank you for choosing the Zerone S866 Electric LCD Display Panel. This manual provides essential information for the proper installation, operation, and maintenance of your new display. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Сүрөт 1.1: Алдыңкы view of the Zerone S866 Electric LCD Display Panel, showing the screen and control buttons.

2. Продукциянын өзгөчөлүктөрү

• Жеңил башкаруу: Quick key functionality allows for straightforward control and parameter adjustment.
• Жөнөкөй орнотуу: Includes an LCD bracket for easy mounting on standard 22.2mm handlebars.
• Таза дисплей: Provides clear status and data information with a backlight feature for visibility in low-light conditions.
• Wide Voltage Шайкештик: Supports 24V, 36V, 48V, and 60V electric bike systems.
• Туруктуу дизайн: Constructed from lightweight and robust ABS material, resistant to daily impacts.

3. Техникалык шарттар

4. Пакеттин мазмуну

Пакетти ачкандан кийин бардык буюмдар бар экенин жана жакшы абалда экендигин текшериңиз:

• 1 x Zerone S866 Electric LCD Display Panel
• 1 х Инструкция (бул документ)

5. Орнотуу жана орнотуу

Follow these steps to properly install your Zerone S866 LCD Display Panel on your electric bicycle:

1. Prepare Handlebars: Ensure the handlebar area where you intend to mount the display is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
2. Дисплейди орнотуу: Use the included bracket to securely attach the S866 display to your handlebar. Tighten the screws firmly but do not overtighten to avoid damage.


Figure 5.1: The S866 display panel shown mounted on bicycle handlebars, ready for connection.

3. Зымдарды туташтыруу: Carefully connect the display's cable to the corresponding port on your electric bicycle's controller or wiring harness. Ensure the connectors are fully seated and secure. Refer to your electric bike's wiring diagram if unsure.


5.2-сүрөт: Арткы view of the S866 display, highlighting the integrated connection cable.

4. Кабелдик башкаруу: Route the cable neatly along your bike frame and secure it with cable ties to prevent snagging or damage during riding.
5. Баштапкы күйгүзүү: Once installed and connected, power on your electric bike. The display should illuminate and show initial data.

6. Иштөө нускамалары

The Zerone S866 LCD Display Panel provides clear information and easy control over your electric bike's functions.

Сүрөт 6.1: Жакын пландан view of the S866 display, showing the digital speed, battery indicator, assist level, and trip distance.

6.1. Баскыч функциялары

• Кубат баскычы (ⓘ):
  • Дисплейди күйгүзүү/өчүрүү үчүн басып кармап туруңуз.
  • Short press to cycle through display modes (e.g., Odometer, Trip Distance).
• Жогору баскычы (+):
  • Short press to increase assist level or navigate menu options upwards.
  • Long press (in certain modes) for specific functions (e.g., headlight control, if supported by your bike's controller).
• Төмөн баскычы (-):
  • Short press to decrease assist level or navigate menu options downwards.
  • Long press (in certain modes) for specific functions.

6.2. Маалыматты көрсөтүү

The LCD screen provides real-time data:

• Ылдамдыгы: Учурдагы минүү ылдамдыгы (км/саат же миль/саат).
• Батарея деңгээли: Graphical indicator showing remaining battery charge.
• Жардам деңгээли: Current pedal assist level (e.g., 0-5).
• Сапардын аралыгы: Учурдагы сапар учурунда басып өткөн аралык.
• Одометр: Велосипед басып өткөн жалпы аралык.
• Ката коддору: Displays specific codes if a system error occurs.

6.3. Параметрди тууралоо

The display allows for basic parameter adjustments. Typically, this involves entering a settings menu by holding a combination of buttons (e.g., Up and Down simultaneously) for a few seconds. Common adjustable parameters may include:

• Unit System (km/h vs. mph)
• Дөңгөлөктүн диаметри
• Батарея Voltage Setting

Note: Specific parameter adjustment procedures may vary slightly. Refer to your electric bike's main controller manual for advanced settings.

7. Техникалык тейлөө жана кам көрүү

To ensure the longevity and proper functioning of your Zerone S866 LCD Display Panel, follow these maintenance guidelines:

• Тазалоо: Дисплейдин экранын жана корпусун жумшак менен сүртүңүз, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as they can damage the plastic and screen.
• Суу таасири: While the display has an IP65 waterproof rating, avoid submerging it in water or exposing it to high-pressure water jets (e.g., from a power washer). Dry any moisture promptly.
• Температура: Avoid exposing the display to extreme temperatures, both hot and cold, for extended periods.
• Таасири: Protect the display from physical impacts and drops, which can cause internal or external damage.
• Байланыштары: Зымдардын туташууларынын бекем жана дат баспагандыгын текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.

8. Кыйынчылыктарды

If you encounter issues with your Zerone S866 LCD Display Panel, try the following troubleshooting steps:

If these steps do not resolve the issue, please contact Zerone customer support or your electric bike dealer for further assistance.

9. Кепилдик жана колдоо

For specific warranty information regarding your Zerone S866 Electric LCD Display Panel, please refer to the warranty card included with your purchase or contact the seller directly. Zerone is committed to providing quality products and customer satisfaction.

For technical support or inquiries, please visit the official Zerone store on Amazon or contact their customer service channels as provided at the point of purchase.

Zerone Store Link: https://www.amazon.com/stores/Zerone/page/A619C4D9-FCE5-459B-B745-8DD2D44F2669