FlyRobo BM730 3-in-1 Voltage Current Power Meter User Manual

Introduction

The FlyRobo BM730 is a compact 3-in-1 digital meter designed to measure DC voltage, current, and power simultaneously. It features a clear 4-digit LED display for easy reading and is suitable for monitoring battery levels, solar panels, and other DC systems. This manual provides essential information for safe and effective operation.

Коопсуздук маалыматы

• Always ensure proper wiring connections before applying power.
• Көрсөтүлгөн көлөмдөн ашпаңызtage (0-100V DC) and current (10A) limits.
• Ток чынжырлары менен байланышуудан сактаңыз.
• This device is intended for DC circuits only.
• Балдар жетпеген жерде сактаңыз.

Пакеттин мазмуну

Бардык элементтер бар экенин текшериңиз:

• 1x FlyRobo BM730 3-in-1 Voltage Ток кубаттуулугун өлчөгүч
• 1x Wiring Harness for Power Supply (Thin Red/Black Wires)
• 1x Wiring Harness for Current Measurement (Thick Red/Black Wires)

Image: The BM730 meter shown with its two included wiring harnesses. One harness has thin red and black wires for power, and the other has thicker red and black wires for current measurement.

Продукт бүттүview

The BM730 meter features a multi-color LED display and control buttons for operation.

Сүрөт: Жогорку view showing the digital display for voltage (V), current (A), and power (W), along with control buttons (Up, M, Down, R). Bottom view shows the circuit board with connection terminals.

Дисплей көрсөткүчтөрү:

• V (Volts): Red display, indicates DC voltage.
• А (Ampэрес): Green display, indicates DC current.
• W (Watts): Blue display, indicates DC power.

Башкаруу баскычтары:

• Өйдө жебе: Used for navigation or increasing маанилери.
• M (режим): Used to switch display modes or confirm settings.
• Төмөн жебе: Used for navigation or decreasing маанилери.
• R (Кайра коюу): Used to reset readings or settings.

Техникалык шарттар

• Тtage диапазону: 0V 100V DC
• Учурдагы диапазон: 0A to 10A DC
• Кубат диапазону: 0W to 1000W (calculated from V*A)
• Дисплей: 4-Digit LED (Red for V, Green for A, Blue for W)
• Өлчөмдөрү (L x W x Y): 80мм x 41мм x 26мм
• Өлчөө түрү: Ammeter, Voltmeter, Wattmeter
• Кубат булагы: Battery Powered (self-powered from measured circuit or external supply)

Орнотуу жана орнотуу

Proper wiring is critical for the safe and accurate operation of the BM730 meter. Refer to the diagram below for connection details.

Зымдарды туташтыруу:

1. Power Supply for Meter (Thin Red/Black Wires):

   Connect the thin red wire to the positive (+) terminal of your DC power source (0-100V).

   Connect the thin black wire to the negative (-) terminal of your DC power source.

   Note: The meter can be self-powered from the circuit it is measuring, or powered by a separate supply within its voltage диапазону.

2. Current Measurement (Thick Red/Black Wires):

   The thick red wire (IN+) and thick black wire (OUT-) are for current measurement. These wires must be connected in series with the load you wish to measure.

   Connect the thick red wire (IN+) to the positive side of the load.

   Connect the thick black wire (OUT-) to the negative side of the load, completing the circuit back to the power source.

   Маанилүү: Do not connect the thick current wires directly across the power source; this will short the circuit and damage the meter or power source.

Кыска туташуунун алдын алуу үчүн бардык туташуулардын коопсуз жана изоляцияланганын текшериңиз.

Иштөө нускамалары

1. Күйгүзүү: Once correctly wired, apply power to the circuit. The meter's display will illuminate, showing voltagэлектрондук, ток жана кубаттуулук көрсөткүчтөрү.
2. Окуу дисплейи:

   The top red display shows voltage вольт менен (V).

   The middle green display shows current in Ampэрес (А).

   The bottom blue display shows power in Watts (W).

3. Баскыч функциялары:

   The buttons (Up, M, Down, R) are typically used for fine adjustment, calibration, or alarm settings. Refer to specific advanced usage guides if available for detailed button functionalities. For basic operation, the meter displays readings automatically.
4. Overvoltage/Overcurrent Alarm: The meter supports an overvoltage and overcurrent sound alarm function. If the measured values exceed preset thresholds, an audible alarm may sound.

Техникалык тейлөө

• Keep the meter clean and dry. Use a soft, dry cloth to wipe the display and casing.
• Avoid exposing the meter to extreme temperatures, humidity, or corrosive environments.
• c ачууга аракет кылбаңызasing or modify the internal circuitry, as this will void any warranty and may cause damage.
• Колдонулбаган учурда коопсуз жерде сактаңыз.

Проблемаларды чечүү

Эсептегич күйбөйт:

Check the thin red and black power supply wires. Ensure they are correctly connected to a DC power source within the 0-100V range. Verify the power source is active.

Тtage displays, but current/power shows 0:

Ensure the thick red (IN+) and black (OUT-) current measurement wires are correctly connected in series with the load. The load must be drawing current for a reading to appear.

Туура эмес окуулар:

Verify all connections are secure and free from corrosion. Ensure the meter is operating within its specified voltage жана учурдагы диапазондор.

Audible alarm sounds:

This indicates an overvoltage or overcurrent condition. Check your circuit for excessive voltage or current draw and adjust as necessary.

Кепилдик жана колдоо

For warranty information or technical support, please contact FlyRobo directly. Refer to your purchase documentation for specific warranty terms.

Өндүрүүчүнүн Байланыш маалыматы: flyroboofficial@gmail.com