uxcell V-156-1C25 Micro Limit Switch Instruction Manual

1. Киришүү

This manual provides essential information for the safe and effective installation, operation, and maintenance of the uxcell V-156-1C25 Micro Limit Switch. This precision component is designed to monitor the position of moving parts in various mechanical systems and can be integrated into AC/DC control circuits for terminal limit protection.

Please read this manual thoroughly before using the product to ensure proper function and to prevent potential hazards.

Figure 1: Package containing six uxcell V-156-1C25 Micro Limit Switches.

2. Продукттун спецификациялары

The uxcell V-156-1C25 Micro Limit Switch features a robust design suitable for various industrial and home applications. Key specifications are detailed below:

Figure 2: Detailed dimensions and contact configuration of the micro limit switch.

3. Коопсуздук маалыматы

WARNING: Electrical components can cause injury or death. Always disconnect power before installation, maintenance, or troubleshooting. Installation should only be performed by qualified personnel.

• Ensure the power supply matches the switch's voltage жана учурдагы рейтингдер.
• Avoid exposing the switch to conditions beyond its IP40 rating (e.g., direct water immersion).
• Verify all connections are secure to prevent short circuits or loose contacts.
• Do not modify the switch or its components.

4. Орнотуу жана орнотуу

The V-156-1C25 micro limit switch is designed for surface mounting and integration into control circuits.

4.1. Монтаждоо

1. Identify a suitable mounting location where the switch's lever can be actuated by the moving part it is intended to monitor.
2. Secure the switch using appropriate fasteners through its mounting holes. Ensure it is firmly attached to prevent movement during operation.
3. Adjust the position of the switch or the actuator arm to ensure reliable contact and release with the moving part.

4.2. Электр зымдары

The switch features 1 Normally Open (NO) and 1 Normally Closed (NC) contact, along with a Common (COM) terminal. Refer to the markings on the switch for correct terminal identification.

• COM (жалпы): This is the shared terminal for both NO and NC contacts.
• ЖОК (Негизде ачык): This contact is open (no current flow) when the switch is in its unactuated (rest) position and closes (allows current flow) when the switch is actuated.
• NC (Нормалдуу жабык): This contact is closed (allows current flow) when the switch is in its unactuated (rest) position and opens (stops current flow) when the switch is actuated.

Connect the switch into your AC or DC control circuit according to your application's requirements. Always ensure power is disconnected before making any wiring connections.

Сүрөт 3: Алдыңкы view of the micro limit switch, highlighting the lever and electrical terminals.

5. Иштөө принциптери

The uxcell V-156-1C25 micro limit switch operates by detecting the presence or absence of a mechanical object. When the lever arm is actuated by a moving part, the internal contacts switch their state:

• The Normally Open (NO) contact closes.
• The Normally Closed (NC) contact opens.

This change in contact state can be used to trigger or stop a process, activate an indicator, or provide feedback to a control system. The switch is designed for high precision and reliable operation over many cycles.

6. Техникалык тейлөө

The V-156-1C25 micro limit switch is designed for durability and requires minimal maintenance. However, periodic checks can extend its lifespan and ensure reliable operation.

• Текшерүү: Regularly inspect the switch for any physical damage, loose connections, or excessive wear on the lever arm.
• Тазалоо: Due to its IP40 rating, the switch is protected against dust. If dust accumulation is observed, gently clean the exterior with a dry, soft cloth. Avoid using liquids or abrasive cleaners.
• Actuation Check: Periodically verify that the switch actuates smoothly and consistently when triggered by the moving part.
• Зымдардын бүтүндүгү: Бардык зымдардын туташууларынын бекем жана дат баспагандыгын текшериңиз.

Кандайдыр бир тейлөө же текшерүү жүргүзүүдөн мурун ар дайым электр кубатын ажыратыңыз.

7. Кыйынчылыктарды

If the micro limit switch is not functioning as expected, consider the following troubleshooting steps:

If problems persist after attempting these solutions, contact uxcell customer support or consult a qualified electrician.

8. Кепилдик жана колдоо

For warranty information and technical support regarding your uxcell V-156-1C25 Micro Limit Switch, please refer to the official uxcell webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Байланыш маалыматы:

• Бренд: uxcell
• Webсайт: Visit the uxcell Store on Amazon
• Модель номери: V-156-1С25
• Бөлүмдүн номери: a24062900ux0690