Yoidesu B0DFPQ9DHT

Yoidesu Video Signal Amplifier Колдонмо

Model: B0DFPQ9DHT

1. Киришүү

This manual provides instructions for the installation, operation, and maintenance of the Yoidesu Video Signal Amplifier. This device is designed to extend the transmission distance of high-definition video signals (AHD, CVI, TVI) up to 2624.7 feet (800 meters) without significant loss in quality. It features a durable aluminum alloy casing and a plug-and-play design for ease of use.

2. Продукт бүтүп калдыview

The Yoidesu Video Signal Amplifier is a compact device with various ports and controls. Familiarize yourself with the components before installation.

Yoidesu Video Signal Ampкөтөргүч, үстү view
2.1-сүрөт: Жогорку view of the Video Signal Amplifier, showing 'in' and 'out' BNC ports and general layout.
Yoidesu Video Signal Ampкөтөргүч, арткы view with power and video adjustment
2.2-сүрөт: Арткы view -ныкы amplifier, highlighting the DC12V power input, V-OUT BNC port, and VIDEO ADJ knob.
Yoidesu Video Signal Ampкөтөргүч, каптал view with DIP switches
2.3-сүрөт: Side view -ныкы amplifier, showing the DIP switches for signal configuration and the 'in' BNC port.

Компоненттери:

  • BNC Ports (In/Out): Standard connectors for video signal input and output.
  • DC12V кубат киргизүү: Port for connecting the 12V DC power adapter (not included).
  • VIDEO ADJ Knob: Used for fine-tuning video signal strength or clarity.
  • DIP өчүргүчтөр: Configuration switches for adjusting signal parameters (refer to Section 4 for details).
  • Алюминий эритмеси Casing: Provides durability and protection for internal components.

3. Техникалык шарттар

ӨзгөчөлүкDescription
МатериалАлюминий эритмеси
Шайкеш сигналAnalog, AHD, CVI, TVI
Колдоого алынган резолюция720P, 960P, 1080P
Киргизүү көлөмүtageDC12V 1A (power supply not included)
Видео интерфейсиBNC
Өткөрмө аралык0 – 50 000 фут (0 – 15 240 м)
Салыштырмалуу нымдуулук0-95% (конденсацияланбаган)
Иштөө температурасы-40°Cден 60°Cге чейин

4. Орнотуу нускамалары

The Yoidesu Video Signal Amplifier is designed for simple plug-and-play operation. Follow these steps for proper setup:

  1. Кабелдерди даярдоо: Ensure you have appropriate BNC cables for your video source and display, and a compatible DC12V 1A power adapter.
  2. Connect Video Input: Connect the BNC cable from your video source (e.g., camera, DVR output) to the 'in' BNC port on the ampөмүрлүү.
  3. Видео чыгышын туташтыруу: Connect another BNC cable from the 'out' BNC port on the amplifier to your video display or recording device (e.g., monitor, DVR input).
  4. Туташуу кубаты: Insert the DC12V 1A power adapter into the DC12V input port on the amplifier. Plug the adapter into a power outlet.
  5. Баштапкы күйгүзүү: The amplifier will power on automatically once connected to power.
  6. DIP которгучту конфигурациялоо (милдеттүү эмес): If your setup requires specific signal adjustments, refer to the DIP switch settings. The switches are typically used for impedance matching or signal type selection. Consult your video source/display documentation for optimal settings. By default, the amplifier should work with common AHD/CVI/TVI signals.

Note: A power supply is not included with the amplifier and must be purchased separately.

5. Иштөө нускамалары

Бир жолу amplifier is set up, operation is straightforward:

  1. Байланыштарды текшерүү: Ensure all BNC cables and the power adapter are securely connected.
  2. Түзмөктөрдү күйгүзүү: Turn on your video source and display device.
  3. Monitor Video Feed: Check your display for the video signal. The amplifier should automatically boost the signal for extended transmission.
  4. Adjust Video Quality (VIDEO ADJ): If the video quality appears degraded or too strong, gently turn the VIDEO ADJ knob (refer to Figure 2.2) to fine-tune the signal. Turn clockwise to increase signal strength/clarity, and counter-clockwise to decrease. Adjust until optimal image quality is achieved on your display.

The amplifier operates continuously when powered, providing a stable and lossless high-definition image over long distances.

6. Техникалык тейлөө

To ensure the longevity and optimal performance of your Yoidesu Video Signal Ampкөтөргүчтү тейлөө үчүн, төмөнкү жөнөкөй көрсөтмөлөрдү аткарыңыз:

  • Тазалоо: Аппараттын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалагычтарды же абразивдүү материалдарды колдонбоңуз.
  • Курчап турган чөйрө: иштетиңиз amplifier within the specified temperature and humidity ranges. Avoid exposing it to extreme temperatures, direct sunlight, or high moisture.
  • Байланыштары: Кабелдин бардык туташууларынын бекемдигин жана коррозияга учурабагандыгын текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.
  • Вентиляция: Ensure the device has adequate ventilation to prevent overheating, although its aluminum casing aids in heat dissipation.

7. Кыйынчылыктарды

If you encounter issues with your video signal amplifier, төмөнкү көйгөйлөрдү чечүү кадамдарын караңыз:

КөйгөйМүмкүн себепЧечим
Дисплейде видео сигнал жок
  • Күч жок ampөмүрлүү
  • Бош же туура эмес кабелдик байланыштар
  • Incorrect input/output ports used
  • Video source or display device is off
  • Ensure DC12V power adapter is connected and functional.
  • Check all BNC cable connections for tightness and correct port usage ('in' to source, 'out' to display).
  • Verify video source and display are powered on and functioning.
Poor video quality (blurry, distorted, noisy)
  • Incorrect VIDEO ADJ setting
  • Damaged BNC cables
  • Сигналдын кийлигишүүсү
  • DIP switches incorrectly set
  • тууралаңыз VIDEO ADJ knob slowly until image quality improves.
  • Replace BNC cables if suspected to be faulty.
  • Кабелдердин күчтүү электр тоскоолдуктарынан алыс тартылганын текшериңиз.
  • Review DIP switch settings according to your signal type and system requirements.
Үзгүлтүксүз сигнал жоготуу
  • Бошоң байланыштар
  • Бузулган электр энергиясы
  • Кабелдин бузулушу
  • Check and secure all BNC and power connections.
  • Test with a different DC12V 1A power adapter if available.
  • Inspect BNC cables for damage; replace if necessary.

Бул чечимдерди колдонуп көргөндөн кийин көйгөй чечилбесе, кардарларды колдоо менен байланышыңыз.

8. Кепилдик жана колдоо

This Yoidesu product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Yoidesu customer support.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Yoidesu customer service through the retailer where the product was purchased or visit the official Yoidesu webколдоо байланыш маалыматы үчүн сайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.