Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. Киришүү

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. Коопсуздук нускамалары

Жаракат алуунун жана шаймандардын бузулушунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Жеке коргонуу шаймандарын (ЖКК) кийиңиз: Always use safety glasses, hearing protection, gloves, and a dust mask.
• Коопсуз жумуш бөлүгү: Ensure the material being worked on is firmly clampиш учурунда кыймылга жол бербөө үчүн орнотулган же камсыздалган.
• Maintain Proper Grip: Hold the angle grinder firmly with both hands, ensuring a stable stance.
• Зыянды текшерүү: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
• Туура аксессуарларды колдонуңуз: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
• Adjust Guard: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
• Ашыкча чектен чыгуудан качыңыз: Maintain balance and control at all times.
• Жумуш аймагын таза кармоо: Remove flammable materials and ensure adequate ventilation.
• Кубатты өчүрүү: Always remove the battery pack before making any adjustments, changing accessories, or performing maintenance.
• Коргоону кайра иштетүү: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
• Электрондук ашыкча жүктөмдөн коргоо: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
• 1 x Separation Protection Cover
• 1 x Tool-free Quick Release Nut
• 1 x Anti-vibration Handle
• 1 x Key (for disc changes if not using quick release)
• 1 x Plastic Tool Box (L-BOXX 238)

4. Орнотуу

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 Батареяны орнотуу

1. Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
2. Батарея таңгагын шаймандагы батарея портуна тууралаңыз.
3. Батарейканы портко тыкылдатмайынча жылдырыңыз.
4. Чыгаруу үчүн, батареядагы чыгаруу баскычын басып, аны сыртка жылдырыңыз.

4.2 Кароолду тууралоо

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

• Loosen the guard's locking mechanism.
• Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
• Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

1. Шпинделди бекитүү баскычын басып, кармап туруңуз.
2. If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
3. Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
4. Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
5. If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

• Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
• Tighten it securely by hand.

5. Иштөө нускамалары

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

• Жандыруу: Slide the power switch forward. The tool features a soft start function for smooth power-up.
• Өчүрүү: Slide the power switch backward to the OFF position.
• Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Cutting and Grinding Techniques

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

• Майдалоо: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
• Кесүү: Кесүү үчүн кесүүчү дискти колдонуңуз жана даяр бөлүк бекем бекитилгенин текшериңизamped. Make straight cuts, allowing the disc to cut without forcing it.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

5.3 Өркүндөтүлгөн функциялар

• Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
• Температура мониторинги: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин бурчтагы жаргылчактын узак иштөөсүн жана оптималдуу иштешин камсыз кылат.

• Тазалоо: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
• Дискти текшерүү: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Батареяга кам көрүү: Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
• Жалпы текшерүү: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7. Кыйынчылыктарды

Жалпы маселелер жана алардын чечимдери үчүн бул бөлүмдү караңыз.

8. Техникалык шарттар

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

• Модел: CCG 18-115-12 AS
• Батарея Voltage: 18 V
• Батарея шайкештиги: Li-ion/ProCORE Li-ion (AMPShare compatible)
• Мотор: Brushless
• Бош ылдамдык: 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
• Майдалоочу дөңгөлөктүн диаметри: 115 мм
• Elastic Sanding Disc Diameter: 115 мм
• тироочу: M 14
• Салмагы (батарейкасыз): 2.20 кг
• Продукциянын өлчөмдөрү (L x W x Y): 35.7 x 25.3 x 44.2 см
• Материал: Metal, aluminium, copper, plastic
• Функциялары: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Fein Official Webсайт: www.fein.com