DARKROCK D240 CPU Liquid Cooler Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your DARKROCK D240 CPU Liquid Cooler. Please read this guide thoroughly before beginning installation to ensure proper setup and optimal performance. The DARKROCK D240 is an all-in-one (AIO) liquid cooling system designed to efficiently dissipate heat from your CPU, featuring a 240mm radiator, addressable RGB lighting, and a pure copper pump base.

Image: The DARKROCK D240 CPU Liquid Cooler integrated into a computer system, showcasing анын RGB жарык эффекттерин.

2. Орнотуу жана орнотуу

2.1 Пакеттин мазмуну

Орнотуудан мурун, пакетте бардык компоненттер бар экенин текшериңиз:

• 1x Radiator with Integrated Pump and Tubing
• 2x 120mm ARGB PWM Cooling Fans
• Intel Mounting Bracket (LGA1851/1700/1200/115X)
• AMD Mounting Bracket (AM5/AM4)
• Intel розеткалары үчүн арткы пластина
• Mounting Screws and Standoffs for Intel/AMD
• Термикалык паста
• Желдетүүчү бурамалар
• 1 to 3 Fan Splitter Cable
• RGB Controller (if included with your model)

Сүрөт: деталдуу view of all parts and accessories included in the DARKROCK D240 CPU Liquid Cooler package.

2.2 Орнотууга чейинки кадамдар

1. Энелик платаңызды даярдаңыз: Ensure your motherboard is compatible with the cooler. The D240 supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets.
2. Эски муздаткычты алып салуу: Эгерде бар болгон муздаткычты алмаштырып жатсаңыз, аны кылдаттык менен алып салып, процессордун бетиндеги эски термикалык пастаны изопропил спирти менен тазалаңыз.
3. Identify Mounting Hardware: Select the appropriate mounting bracket and screws for your CPU socket type (Intel or AMD).

Image: Visual representation of the cooler's compatibility with various AMD and Intel CPU sockets.

2.3 Mounting the Radiator and Fans

1. Attach the two 120mm fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or side).

Image: Illustration of the 120mm PWM/ARGB cooling fans and the radiator, highlighting their features.

Сүрөт: жакын план view of the radiator's fin structure, designed for optimal heat dissipation.

2.4 Installing the Pump Head

1. Процессоруңуздун интеграцияланган жылуулук тараткычынын (IHS) ортосуна бир аз көлөмдөгү термикалык пастаны сүйкөңүз.
2. Attach the correct mounting bracket to the pump head. Ensure the protective film is removed from the copper base before installation.
3. Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs on the motherboard.
4. Secure the pump head with the thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

Image: A visual representation of the pure copper base of the pump and the liquid circulation path.

2.5 Зымдарды туташтыруу

Connect the pump and fan cables to your motherboard or an RGB controller as follows:

• Power Pump: Connect the pump's 3-pin or 4-pin connector to the dedicated AIO_PUMP or CPU_OPT header on your motherboard.
• желдеткич күчү: Connect the fan cables to the 1-to-3 splitter cable, then connect the splitter to a CPU_FAN or SYS_FAN header on your motherboard.
• ARGB жарыктандыруу: Connect the ARGB cables from the fans and pump head to a 5V 3-pin ARGB header on your motherboard or to the included RGB controller. Ensure correct pin alignment to prevent damage.
• RGB Controller Power: If using an RGB controller, connect it to a SATA power connector from your power supply.

Image: A comprehensive diagram illustrating the electrical connections for the pump, fans, and ARGB lighting.

2.6 Орнотуу видеосу

For a visual guide on the installation process, please refer to the official installation video:

3. Иштөө нускамалары

3.1 Баштапкы күйгүзүү

After completing the installation and wiring, power on your computer. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.

3.2 ARGB Жарыкты башкаруу

The DARKROCK D240 features addressable RGB lights on both the fans and the water-cooling head. These can be controlled via:

• Энелик плата программасы: If connected to a compatible 5V 3-pin ARGB header, you can synchronize and customize lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Камтылган RGB контроллери: If your model includes a dedicated RGB controller, use its buttons or remote control to cycle through various lighting modes, colors, and effects.

Image: A computer case interior illuminated by the customizable addressable RGB lighting of the DARKROCK D240 cooler and other components.

Image: The RGB controller and its remote, used for adjusting the cooler's lighting effects.

3.3 PWM Smart Control

The adjustable PWM fans (800 RPM - 1800 RPM) automatically adjust their speed based on CPU temperature. This provides efficient cooling when needed and reduces noise during lighter loads. You can often fine-tune fan curves through your motherboard's BIOS settings or dedicated software.

3.4 Продукциянын көргөзмө видеосу

Observe the DARKROCK D240 in action with its dynamic RGB lighting and cooling capabilities:

4. Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your liquid cooler:

• Чаңды тазалоо: Аба агымына тоскоол болуп, муздатуу эффективдүүлүгүн төмөндөтүүчү чаңдын топтолушуна жол бербөө үчүн радиатордун канаттарын жана желдеткичтин пычактарын мезгил-мезгили менен тазалап туруңуз. Кысылган абаны же жумшак щетканы колдонуңуз.
• Түтүктөрдү жана байланыштарды текшерүү: Occasionally check the tubing for any signs of leaks or kinks. Ensure all electrical connections are secure.
• Термикалык паста: While not frequently required, if you ever remove the pump head from the CPU, you will need to clean off the old thermal paste and apply new paste before reinstallation.

5. Кыйынчылыктарды

If you encounter issues with your DARKROCK D240 CPU Liquid Cooler, consider the following:

• Кубат жок/ Жарык жок:
  • Check all power connections (pump, fans, RGB controller) to ensure they are securely plugged in.
  • Verify that the motherboard headers are supplying power (check BIOS settings).
  • If using an RGB controller, ensure it is receiving SATA power.
• Жогорку CPU температурасы:
  • Confirm the pump is running (you might feel a slight vibration or hear a low hum).
  • Ensure the pump head is securely mounted to the CPU and thermal paste was applied correctly.
  • Check fan operation and ensure they are spinning and providing adequate airflow.
  • Радиатордун канатчаларынан чаңды тазалаңыз.
• Анормалдуу ызы-чуу:
  • Үн желдеткичтерден же насостон чыгып жатканын аныктаңыз.
  • For fans, check for obstructions or loose mounting.
  • For pump noise, ensure it's not running dry (though unlikely with a sealed AIO).
• RGB Not Working/Incorrect Colors:
  • Verify the ARGB cables are connected to a 5V 3-pin header, not a 12V 4-pin RGB header, as this can cause damage.
  • Check motherboard RGB software settings or RGB controller mode.
  • Ensure all ARGB connections are firm.

6. Техникалык шарттар

7. Кепилдик жана колдоо

For warranty information and technical support, please refer to the official DARKROCK webсайтына кириңиз же алардын кардарларды тейлөө кызматына кайрылыңыз. Кепилдик боюнча дооматтар үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.

Optional protection plans may be available for extended coverage. Please check with your retailer for details on available protection plans.