Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your YUHANUS 600lb Electric Magnetic Lock Kit. This system is designed to provide secure and convenient access control for various door types, featuring multiple entry methods including RFID cards, PIN codes, and remote control. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Продукт компоненттери
The YUHANUS 600lb Electric Magnetic Lock Kit includes the following main components:
- Access Control Keypad: For PIN and RFID card entry.
- 600lb Electromagnetic Lock: Provides strong locking force.
- Power Supply Control Box: Manages power distribution and system logic.
- Press to Exit Button: For convenient egress from the secured area.
- Doorbell Chime: Alerts occupants to visitors.
- Алыстан башкаруу каражаттары: For wireless door unlocking.
- RFID карталары: For card-based access.
- Mounting Brackets (Z and L): For various installation types.
Сүрөт: бүттүview of the YUHANUS 600lb Electric Magnetic Lock Kit components, including the keypad, magnetic lock, power supply, exit button, doorbell, and remote controls.
Жайгашуу
1. Электр схемасы
Carefully follow the wiring diagram to connect all components. Ensure all connections are secure and correctly polarized to prevent damage to the system.
Image: Detailed wiring diagram illustrating connections between the access control keypad, power supply, magnetic lock, exit button, doorbell, and remote control receiver.
2. Компонентти орнотуу
Install each component in its designated location. The access control keypad is typically mounted on the exterior side of the door, while the magnetic lock is installed on the door frame and door. The power supply control box should be placed in a secure, dry location. The exit button and doorbell chime are for interior use.
- Access Control Keypad: Mount the keypad at a convenient height near the door.
- Electromagnetic Lock: Install the magnetic lock on the door frame and the armature plate on the door using the appropriate Z and L brackets for your door type. Ensure proper alignment for secure locking.
- Power Supply Control Box: Connect the AC power input (110V-240V) to the power supply. Connect the output to the access control system components as per the wiring diagram.
- Press to Exit Button: Mount the exit button on the interior side of the door.
- Doorbell Chime: Connect the doorbell chime to the keypad as indicated in the wiring diagram.
Image: Close-up of the NFC Keypad, showing the numeric keys and doorbell icon.
Image: The 600lb waterproof electromagnetic lock and its armature plate.
Image: Z and L brackets used for mounting the magnetic lock on different door types.
Image: The doorbell chime unit.
Image: The 'Press to Exit' button for interior door release.
Image: A remote control for wireless door access.
Иштөө нускамалары
1. Баштапкы орнотуу жана негизги код
The default master code for the access control keypad is typically 9999. This code is used to enter programming mode to set new PINs, add cards, and configure system settings. It is highly recommended to change the default master code immediately after installation.
2. Setting a New PIN Code
To set a new PIN code:
- Басыңыз *9999# (default master code).
- Басыңыз 5 to enter the new PIN setting mode.
- Сиздин киргизиңиз Жаңы PIN (мисалы, 1234).
- Басыңыз #.
- Re-enter your Жаңы PIN.
- Басыңыз # ырастоо үчүн.
Video: Demonstration of setting a new PIN code on the access control keypad.
3. Opening the Door by PIN
To open the door using a PIN code:
- Сиздин киргизиңиз PIN код баскычтопто.
- Басыңыз #. The lock will disengage for a set period.
Video: Demonstration of opening the door using a PIN code on the access control keypad.
4. Adding New RFID Cards
To add new RFID cards to the system:
- Басыңыз *9999# (master code).
- Басыңыз 1 to enter card adding mode.
- Swipe each new RFID card over the keypad. The keypad will beep to confirm each card is added.
- Басыңыз # to exit card adding mode.
Video: Demonstration of adding new RFID cards to the access control system.
5. Opening the Door by RFID Card
To open the door using an RFID card:
- Swipe a registered RFID card over the keypad. The lock will disengage.
Video: Demonstration of opening the door using an RFID card.
6. Пультту колдонуу
The remote control provides wireless access to unlock the door. Press the unlock button on the remote to disengage the magnetic lock.
Video: Demonstration of using the remote control to unlock the door.
7. Коңгуроо функциясы
Visitors can press the doorbell icon on the access control keypad. This will activate the indoor doorbell chime, alerting occupants.
Video: Demonstration of the doorbell function and indoor door release.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your access control system:
- Тазалоо: Wipe the keypad and magnetic lock surfaces with a soft, damp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Туташуу текшерүү: Мезгил-мезгили менен бардык зымдарды байланыштарды текшерип, алар бекем жана коррозияга учурабайт.
- Magnetic Lock Alignment: Ensure the magnetic lock and armature plate remain properly aligned. Misalignment can reduce holding force.
- Программалык камсыздоонун жаңыртуулары: Өндүрүүчүнү текшериңиз website for any available firmware updates for the keypad or power supply.
Проблемаларды чечүү
If you encounter issues with your YUHANUS Electric Magnetic Lock Kit, refer to the following troubleshooting guide:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Lock does not engage/disengage. | Incorrect wiring, power supply issue, magnetic lock misalignment, faulty component. | Verify all wiring connections against the diagram. Check power supply output. Ensure magnetic lock and armature plate are aligned. Test components individually if possible. |
| Баскычтоп жооп бербей жатат. | No power, loose connection, keypad malfunction. | Check power to the keypad. Ensure keypad wiring is secure. If issues persist, the keypad may need replacement. |
| RFID cards not working. | Cards not programmed, incorrect card type, faulty keypad reader. | Ensure cards are properly programmed following the 'Adding New RFID Cards' section. Verify card compatibility. |
| Пульт иштебей жатат. | Remote battery dead, remote not paired, receiver issue. | Replace remote battery. Ensure remote is paired with the system receiver. Check receiver wiring. |
| Doorbell chime not sounding. | Incorrect wiring, chime malfunction. | Check doorbell chime wiring connections. Ensure the chime unit is receiving power. |
Техникалык шарттар
- Бренд: ЮХАНУС
- Модель номери: YH-G1501-OP22-280-RT
- Кулпу түрү: Электромагниттик кулпу
- Холдинг күчү: 600лб
- Кирүү ыкмалары: PIN, RFID Card, Remote Control
- Баскычтоп: Waterproof RFID Keypad
- Кубат булагы: Battery Powered (for some components, main power supply is AC 110-240V to DC 12V)
- Тtage: 12 вольт (ток)
- Башкаруу ыкмасы: Алыстан башкаруу, тийүү
- Элементтин өлчөмдөрү (L x W x Y): 12 x 7 x 3 дюйм
- Элемент Салмагы: 6.32 фунт
- UPC: 769894491157
Кепилдик маалымат
This YUHANUS product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and duration, refer to the product packaging or contact YUHANUS customer support.
Колдоо
For technical assistance, troubleshooting, or further inquiries, please contact YUHANUS customer support:
- Электрондук почта: support@yuhanus.com (exampле)
- Телефон: 1-800-XXX-XXXXX (мисampле)
- Webсайт: www.yuhanus.com (мисampле)
Please have your model number (YH-G1501-OP22-280-RT) and purchase date available when contacting support.