BLACK+DECKER BMT126C Hand Tool Kit User Manual

1. Продукт бүтүп калдыview

The BLACK+DECKER BMT126C is a comprehensive 126-piece hand tool kit designed for various household DIY tasks and general maintenance. This kit provides a selection of essential tools for common repairs and projects.

Image 1.1: The BLACK+DECKER BMT126C Hand Tool Kit, showcasing all 126 pieces neatly organized within its durable carrying case.

Негизги өзгөчөлүктөрү:

• Оңой сактоо жана көчүрүү үчүн компакт жана жеңил дизайн.
• Suitable for household DIY tasks and emergency maintenance.
• Includes a wide range of tools such as screwdrivers, wrenches, pliers, hammer, utility knife, saw, and measuring tape.
• Durable blow-molded case for organized storage.

2. Жалпы коопсуздук маалыматы

Always prioritize safety when using hand tools. Following these general guidelines will help prevent accidents and ensure safe operation.

• Тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз: This includes safety glasses, gloves, and sturdy footwear.
• Inspect tools before use: Ensure all tools are in good working condition. Do not use damaged or worn tools.
• Жумуш үчүн туура куралды колдонуңуз: Using a tool for a purpose it was not designed for can cause damage to the tool or injury to the user.
• Keep tools clean and maintained: Clean tools after each use and store them properly to prevent rust and damage.
• Maintain a stable work area: Ensure your work surface is clear, well-lit, and stable.
• Балдарды жана жанындагыларды алыс кармаңыз: Tools can be dangerous if not handled properly.
• Куралдарды коопсуз сактаңыз: Keep tools in their case or a designated storage area, out of reach of children.

3. Комплект Мазмуну

The BLACK+DECKER BMT126C Hand Tool Kit includes the following items, organized within a durable blow-molded case:

Сүрөт 3.1: Детальдуу view of the kit contents with labels for easy identification.

Image 3.2: All tools from the BMT126C kit displayed outside the case.

Image 3.3: A visual representation and list of all 126 components included in the kit.

Detailed List of Components:

Image 3.4: Close-up of various precision bits, 25mm bits, and 1/4" drive sockets included in the kit.

Image 3.5: The larger screwdrivers with ergonomic handles.

Image 3.6: The precision screwdrivers for delicate tasks.

4. Иштөө нускамалары

This section provides general guidance on using the various tools in your BLACK+DECKER BMT126C kit. Always refer to specific project requirements and safety precautions.

4.1. Screwdrivers and Bits

• Тандоо: Choose the correct screwdriver tip (Phillips, Slotted, Torx, Hex) and size that matches the screw head. Using the wrong size can strip the screw or damage the tool.
• Колдонуу: Apply firm, steady pressure while turning the screwdriver clockwise to tighten or counter-clockwise to loosen. For precision screwdrivers, use gentle force.

Image 4.1: Demonstrating the use of a precision screwdriver for small tasks.

4.2. Pliers (Long Nose & Combination)

• Узун мурун кычкач: Ideal for gripping small objects, bending wire, and reaching into tight spaces.
• Комбинацияланган кычкачтар: Versatile for gripping, bending, and cutting wires. Use the cutting edge for electrical wires or soft metals.
• Коопсуздук: Do not use pliers to cut hardened steel wire unless specifically designed for it. Avoid using pliers as a hammer.

Image 4.2: Long nose pliers being used to manipulate electrical wire.

4.3. Жөнгө салынуучу ачкыч

• Тууралоо: Turn the worm screw to adjust the jaw opening to fit the fastener snugly.
• Колдонуу: Apply force to the fixed jaw side to prevent slippage and damage to the fastener.

4.4. Claw Hammer

• Как салуу: Hold the nail with one hand and strike the head squarely with the hammer face. Once the nail is started, remove your hand and continue striking.
• Nail Removal: Use the claw end to pry out nails. Ensure the claw is fully engaged under the nail head.
• Коопсуздук: Always strike squarely. Do not use the side of the hammer head.

4.5. Пайдалуу бычак

• Blade Extension: Extend the blade only as far as necessary for the cut.
• Кесүү: Always cut away from your body. Use a cutting mat or sacrificial surface underneath.
• Бычакты алмаштыруу: Replace dull blades promptly for safety and efficiency. Snap off segments as needed for fresh edges.
• Коопсуздук: Retract the blade fully when not in use.

4.6. Өлчөө лентасы

• Өлчөө: Extend the tape measure to the desired length. Ensure it is straight and taut for accurate readings.
• Кулпулоо: Use the lock mechanism to hold the tape at a specific length.

5. Кароо жана тейлөө

Proper care and maintenance will extend the life of your BLACK+DECKER hand tools and ensure their optimal performance.

• Тазалоо: After each use, wipe down tools with a clean, dry cloth to remove dirt, grease, and moisture. For stubborn grime, a mild detergent or solvent can be used, followed by thorough drying.
• Майлоо: Periodically apply a light coat of oil to moving parts of pliers, wrenches, and other hinged tools to ensure smooth operation and prevent rust.
• Сактагыч: Always store tools in their designated slots within the blow-molded case. This protects them from damage, keeps them organized, and prevents loss. Store the case in a dry environment to prevent rust.
• Текшерүү: Regularly inspect tools for signs of wear, damage, or corrosion. Replace or repair damaged tools immediately.
• Айкындуулук: Keep cutting tools (utility knife blades, saw blades) sharp. Replace utility knife blades when dull.

6. Жалпы көйгөйлөрдү чечүү

Most issues with hand tools can be resolved by ensuring proper usage and maintenance. Here are some common scenarios:

• Screw Head Stripping: Ensure you are using the correct screwdriver tip size and type for the screw. Apply adequate downward pressure to prevent cam-out.
• Tool Slipping: For wrenches and pliers, ensure the jaws are properly adjusted and gripping the fastener or object securely. Clean any grease or oil from the tool and workpiece.
• Даттын пайда болушу: Rust is typically caused by moisture. Ensure tools are clean and dry before storage. Apply a light oil coating to metal surfaces, especially in humid environments.
• Difficulty Cutting: Check the blade of your utility knife or saw. A dull blade requires more force and can be dangerous. Replace or sharpen as needed.
• Lost Pieces: The blow-molded case is designed to keep tools organized. Always return tools to their specific slots after use to prevent misplacement.

7. Продукттун спецификациялары

8. Кепилдик жана Кардарларды колдоо

BLACK+DECKER provides a 6-month warranty for this product. For any warranty-related issues, product feedback, or customer support, please use the contact information below.

Image 8.1: BLACK+DECKER Total Care contact details for support.

Кардарларды тейлөө кызматынын байланышы:

• Телефон: 1860-425-1111 (Monday to Friday, 10 AM to 5 PM, except government holidays)
• Электрондук почта: SBD-CUSTOMERCOMMUNICATIONS@SBDINC.COM
• WhatsApp: +91 96060 55835
• Ыйгарым укуктуу тейлөө борборлору: Over 500+ locations.

Өндүрүүчү: Stanley Black & Decker India Private Ltd, #28, Akemps, 3rd Main, 1st Cross, Ashwini Layout Koramangala Bangalore - 560047