Instruction Manual

1. Introduction and Overview

This manual provides essential information for the installation and use of replacement spare parts for Konica Minolta Bizhub Press series printers. These parts are designed to replace components within the Charge Corona Unit Grid KIT, specifically for models C1060, C1070, C1070P, C1060L, and C2070. It is crucial to review this document thoroughly before attempting any installation to ensure proper fit and function.

2. Продукттун шайкештиги

These spare parts are compatible with the following Konica Minolta Bizhub Press printer models:

• Konica Minolta Bizhub Press C1060
• Konica Minolta Bizhub Press C1070
• Konica Minolta Bizhub Press C1070P
• Konica Minolta Bizhub Press C1060L
• Konica Minolta Bizhub Press C2070

Маанилүү: Model numbers are provided for reference only. Before ordering or installing, carefully compare the appearance and part number of the replacement item with your original printer part to ensure full compatibility and proper fit. Discrepancies may lead to improper function or damage.

3. Пакеттин мазмуну

The package typically includes one set of Charge Corona Unit Grid KIT components, as depicted in the images below. The exact contents may vary based on your specific selection at the time of purchase (e.g., 1-piece, a set, or a lot).

3.1-сүрөт: A white cylindrical printer component, possibly a roller or part of the corona unit, packaged in a brown cardboard box.

3.2-сүрөт: Components of the Charge Corona Unit Grid KIT, featuring a long metallic bar assembly and a flat flexible cable. The "MCC COPIER SUPPLY" logo is visible.

4. Орнотуу жана орнотуу

1. Биринчи коопсуздук: Before beginning any installation, ensure the printer is powered off and unplugged from the electrical outlet. Allow sufficient time for the printer to cool down if it has been recently in operation.
2. Access the Unit: Refer to your printer's official service manual for instructions on how to safely access the Charge Corona Unit Grid KIT within your specific Konica Minolta Bizhub Press model.
3. Эски бөлүгүн алып салуу: Carefully disconnect any cables or connectors attached to the old Charge Corona Unit Grid KIT. Note their positions for reassembly. Gently unmount and remove the old unit.
4. Compare Parts: Before installing the new part, visually compare it with the old part to confirm they are identical in shape, size, and connection points. This step is critical for compatibility.
5. Жаңы бөлүктү орнотуу: Carefully position the new Charge Corona Unit Grid KIT into its designated slot. Ensure all mounting points align correctly.
6. Кайра туташуу: Reconnect any cables or connectors that were detached during removal. Ensure all connections are secure.
7. Reassemble Printer: Follow the reverse steps to reassemble the printer's covers and panels.
8. Сыноо функциясы: Plug in and power on the printer. Perform a test print or diagnostic check to ensure the new part is functioning correctly and there are no error messages.

Note: If you are unsure about any step, it is recommended to consult a qualified printer technician or refer to the official Konica Minolta service manual for your specific printer model.

5. Техникалык тейлөө

Proper maintenance of printer components can extend their lifespan and ensure optimal printer performance. While these are replacement parts, general maintenance practices apply:

• үзгүлтүксүз тазалоо: Periodically clean the surrounding areas of the Charge Corona Unit Grid KIT within the printer using a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
• Чаңды тазалоо: Use compressed air to gently remove dust and debris from accessible areas, ensuring not to dislodge any delicate components.
• Кесиптик тейлөө: For internal cleaning or complex maintenance, it is advisable to seek professional servicing from a certified technician.

6. Кыйынчылыктарды

If you encounter issues after installing the replacement part, consider the following troubleshooting steps:

• Printer Error Codes: If the printer displays an error code, consult your printer's user manual or Konica Minolta's support website to understand the meaning of the code and recommended solutions.
• Туташуу текшерүү: Ensure all cables and connectors to the Charge Corona Unit Grid KIT are securely attached and not loose.
• Бөлүктү тегиздөө: Verify that the new part is correctly seated and aligned within its designated slot. Improper alignment can prevent proper function.
• Принтерди кайра иштетүү: Power off the printer, unplug it for a few minutes, then plug it back in and power it on. This can sometimes resolve minor electronic glitches.
• Кайра орнотуу: If issues persist, carefully re-perform the installation steps, paying close attention to the comparison and alignment of the parts.

If the problem cannot be resolved, contact a qualified printer technician for assistance.

7. Техникалык шарттар

8. Маанилүү эскертүүлөр

• Шарты: The product may be compatible new or original refurbished, sent at random. Please do not order if you have specific concerns about the condition.
• Бөлүктү текшерүү: Always compare the item's appearance and part number with your original part before installation to ensure compatibility.
• Measurement Variation: Due to manual measurement processes, slight differences in dimensions may occur.

9. Кепилдик жана колдоо

Specific warranty information for this product is not provided in the available documentation. For support regarding installation, compatibility, or product issues, please refer to the seller or the platform where the purchase was made. It is recommended to retain your purchase receipt for any potential inquiries.