BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. Коопсуздук маалыматы

Please read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Жок jump start a frozen battery.
• Жок use the jump starter if the cables or clampлар бузулган.
• Ensure proper polarity: кызыл cl туташтырууamp оң (+) терминалга жана кара clamp to the negative (-) terminal. Reverse polarity can cause damage.
• cl алып салууamps promptly: cl ажыратыңызamps from the vehicle battery immediately after the engine starts.
• Балдардан алыс болуңуз: Бул шайман оюнчук эмес.
• Иштөө температурасы: Use the device within the specified temperature range (-4°F to 140°F).
• Вентиляция: Ensure adequate ventilation when operating the air compressor.
• Коргоо өзгөчөлүктөрү: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Продукт бүтүп калдыview & Компоненттери

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Кутуда эмне бар

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• Smart Jumper Clamps (Оң үчүн кызыл, терс үчүн кара)
• Air Hose with Quick Connector
• Various Air Nozzles (for different inflatables)
• USB-C заряддоо кабели
• User Manual
• Сактоочу куту

2.2 Продукттун өзгөчөлүктөрү

• 7000A эң жогорку ток: Capable of starting all gas engines and up to 10.0L diesel engines.
• 150 PSI аба компрессору: Cordless inflator with tire pressure detection for various inflatables.
• 26800mAh Power Bank: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• 3.4" LCD дисплей: Clear display for battery status, pressure readings, and operational modes.
• Кош LED жарыктары: Features Normal, SOS, and Strobe modes for emergency illumination.
• Өркүндөтүлгөн коопсуздук чаралары: 10 types of protection for safe operation.
• Бардык аба ырайы боюнча иштөө: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Башкаруу панели жана порттор

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• LCD дисплей: Shows battery level, pressure, and mode.
• "M" Button: Mode/Unit Switching (e.g., PSI, BAR, KPA).
• "OK" Button: Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• "+" баскычы: Preset Air Pressure Increase.
• "-" баскычы: Preset Air Pressure Decrease.
• Jump Start Port: For connecting smart jumper clamps.
• Аба шланг порту: For connecting the air hose.
• USB-A чыгаруу порттору (x2): Тышкы түзмөктөрдү кубаттоо үчүн.
• USB-C Input/Output Port (x1): For charging the jump starter or external devices.

3. Орнотуу

3.1 Стартерди кубаттоо

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. USB-C кабелинин экинчи учун USB дубал адаптерине (кошулмада жок) же кубаттагычтуу USB портуна туташтырыңыз.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. Charging is complete when the battery indicator shows full.

4. Иштөө нускамалары

4.1 Унаанын секирип от алдыруу

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

1. 1-кадам: Акылдуу кошкучтун көк сайгычын сайыңызamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. 2-кадам: Кызыл (+) cl туташтырыңызamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp унаанын аккумуляторунун терс терминалына.
3. 3-кадам: Once connected, the smart clamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. 4-кадам: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, андан кийин кызыл (+) clamp. Disconnect the smart clampсекирүүчү стартер блогунан s.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clampбашталгандан кийин дароо.

4.2 Аба компрессорун колдонуу

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Use the "+" and "-" buttons to set the desired target pressure.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Disconnect the nozzle and air hose.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Power Bank катары колдонуу

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. Секирип баштоочу түзмөгүңүздү автоматтык түрдө кубаттай баштайт.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 LED фонарьды колдонуу

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Техникалык тейлөө

• Заряддоо: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
• Тазалоо: Түзмөктү кургак, жумшак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
• Сактагыч: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Кабельге кам көрүү: Inspect jumper cables and air hose for any damage before each use.

6. Кыйынчылыктарды

7. Техникалык шарттар

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Кепилдик жана колдоо

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
• 24/7 Кардарларды колдоо: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM webсайт.