HiKOKI 10.8V Cordless Circular Saw C1205DA 125mm Instruction Manual

1. Продукт бүтүп калдыview

The HiKOKI 10.8V Cordless Circular Saw C1205DA is a compact and lightweight power tool designed for efficient cutting tasks. Featuring a 10.8V lithium-ion battery and a high-efficiency brushless motor, this saw delivers cutting performance comparable to 18V models. Its ergonomic design and advanced features enhance user comfort and precision.

Figure 1: HiKOKI 10.8V Cordless Circular Saw C1205DA.

2. Негизги өзгөчөлүктөрү

• Жеңил жана компакт дизайн: Weighing 2.2kg (with BSL1240M battery), the saw is easy to handle, reducing user fatigue during extended operation.
• 18V Equivalent Cutting Speed: Equipped with a small, high-efficiency brushless motor and a standard Super Chip Saw Kuroshachi (125mm), it achieves cutting speeds comparable to 18V models, offering approximately 20% faster cutting than conventional products under specific conditions (wood cross-cutting, SPF 2x10 material, 20N pressing load).
• Optimized Handle Angle: The 28° handle angle provides improved workability, making it easier to apply force, especially when cutting thin materials.
• Low Vibration and Low Noise: Designed for reduced vibration and noise, enhancing user comfort and making it suitable for various work environments, including indoors and residential areas.
• Improved Switch Lock Operability: A tapered switch lock button design makes it easier to press and operate.
• Жогорку жарыктыктагы LED жарыгы: Integrated LED light illuminates the cutting area for improved visibility.
• Соккуну азайтуу системасы: Helps to mitigate kickback during operation. Users must ensure materials are securely fixed and the tool is held firmly.
• New Parallelism Adjustment Link Structure: Allows for smooth vertical adjustment of the base, ensuring precise cuts.
• Үрүүчү функциясы: Clears sawdust from the cutting line, maintaining visibility and accuracy.
• Четтерин кесүү функциясы: The sub-base can be removed to enable reverse 15° edge cutting.

Figure 2: Illustrates the cutting capacity of the circular saw, showing approximately 230 cuts of SPF 2x4 material per charge.

Figure 3: Highlights the lightweight (2.2kg) and compact design of the C1205DA, emphasizing its maneuverability.

Figure 4: Demonstrates the 18V equivalent cutting speed achieved by the C1205DA, comparing it to other models.

Figure 5: Shows the optimal 28° handle angle designed for easier force application and improved workability.

Figure 6: Illustrates the new parallelism adjustment link structure, allowing for smooth vertical base adjustments.

3. Пакеттин мазмуну

The HiKOKI 10.8V Cordless Circular Saw C1205DA(2LSP) package includes the following items:

• HiKOKI 10.8V Cordless Circular Saw C1205DA
• 10.8V Lithium-ion Battery (BSL1240M) x 2
• Charger (UC12SL)
• System Case 3
• Chip Saw Kuroshachi (125mm)
• Hex Wrench
• Түтүк адаптери

Figure 7: All items included in the HiKOKI C1205DA(2LSP) package.

4. Коопсуздук маалыматы

Электр шаймандарын колдонууда өрт, электр шок жана жеке жаракат алуу коркунучун азайтуу үчүн ар дайым негизги коопсуздук чараларын сактаңыз. Операциядан мурун бардык нускамаларды кылдат окуп чыгыңыз.

• Тиешелүү жеке коргоочу шаймандарды (ЖКК) кийиңиз, анын ичинде коргоочу көз айнек, угууну коргоо жана кол кап.
• Даярдоочу бөлүктүн бекем clamped же кесүү учурунда кыймылга жол бербөө үчүн өткөрүлөт.
• Keep hands and body clear of the cutting blade.
• d-де арааны иштетпеңизamp же нымдуу шарттар.
• Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же аспапты сактоодон мурда ар дайым батарея топтомун ажыратыңыз.
• Use only HiKOKI recommended accessories and replacement parts.

5. Орнотуу

5.1 Батареяны орнотуу жана алып салуу

1. To install the battery, align the battery pack with the receptacle on the saw and slide it in until it clicks into place.
2. Батареяны чыгаруу үчүн, батареяны чыгаруу баскычын басып, батарея пакетин сыртка жылдырыңыз.

5.2 Блейдди орнотуу жана алып салуу

1. Ensure the battery is removed before changing the blade.
2. Бычакты бекитүү үчүн шпиндельди бекитүү баскычын басыңыз.
3. Use the hex wrench to loosen the blade bolt.
4. Сырткы фланецти жана эски бычакты алып салыңыз.
5. Install the new 125mm Super Chip Saw Kuroshachi blade, ensuring the teeth are pointing in the direction of rotation.
6. Replace the outer flange and tighten the blade bolt securely with the hex wrench while holding the spindle lock.

5.3 Кесүү тереңдигин жана конус бурчун тууралоо

1. Кесүү тереңдиги: Loosen the depth adjustment lever, raise or lower the base to the desired cutting depth, and then tighten the lever.
2. Эң бурч: Loosen the bevel adjustment lever, tilt the saw base to the desired angle (up to 45°), and then tighten the lever.

6. Операция

6.1 Арааны ишке киргизүү жана токтотуу

1. To start the saw, press the switch lock button and then pull the trigger switch.
2. Арааны токтотуу үчүн, ачкычты кое бериңиз.

6.2 Жалпы кесүү ыкмалары

1. Mark your cutting line clearly on the workpiece.
2. Position the saw with the blade just above the workpiece, aligning the blade with the cutting line.
3. Материалды тартуудан мурун арааны баштаңыз жана бычактын толук ылдамдыгына жетиңиз.
4. Maintain a steady, even pressure and feed rate through the material. Avoid forcing the saw.
5. Ensure proper support for the workpiece to prevent pinching the blade or kickback.

6.3 Using the Blower Function and Edge Cutting

• The integrated blower function automatically clears sawdust from the cutting line during operation.
• For edge cutting (reverse 15°), remove the sub-base as described in the manual. This allows for cuts closer to edges or walls.

7. Техникалык тейлөө

7.1 Тазалоо

• Regularly clean the saw's ventilation openings to prevent overheating.
• Remove sawdust and debris from the blade guard and base plate after each use.
• Use a soft, dry cloth for cleaning. Do not use solvents or abrasive cleaners.

7.2 Бычакка кам көрүү

• Inspect the blade for sharpness and damage before each use. Replace dull or damaged blades immediately.
• Ылайыктуу бычакты тазалоочу менен бычактан чайырды жана чайырды тазалаңыз.

7.3 Батареяга жана заряддагыч түзүлүшкө кам көрүү

• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Do not expose batteries or chargers to water or moisture.
• Батареянын иштөө мөөнөтүн сактоо үчүн, сактоодон мурун жана узак сактоо мезгилинде батареяларды мезгил-мезгили менен толук кубаттаңыз.

8. Кыйынчылыктарды

Жалпы көйгөйлөр жана аларды чечүү жолдору үчүн төмөнкү таблицага кайрылыңыз.

9. Техникалык шарттар

10. Кепилдик жана колдоо

HiKOKI products are manufactured to high-quality standards and come with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For product support, service, or repair inquiries, please visit the official HiKOKI website or contact your local authorized service center. Online repair applications are also available for convenience.

Figure 8: ашыкview of the HiKOKI online repair application process.

You can find more information and support on the official HiKOKI store page: HiKOKI Store