ASD A-LTR-24A45

ASD 2x4 Center Basket LED Troffer Panel Light

Model: A-LTR-24A45 Instruction Manual

1. Киришүү

This manual provides essential information for the safe installation, operation, and maintenance of your ASD 2x4 Center Basket LED Troffer Panel Light. Please read these instructions thoroughly before installation and retain them for future reference.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Электр шок коркунучу. Орнотуудан же тейлөөдөн мурун электр энергиясын өчүрүңүз.

  • Орнотуу улуттук жана жергиликтүү электр эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.
  • камсыз кылуу voltage is compatible with the luminaire (120-277V).
  • Do not handle the fixture with wet hands or when standing on wet surfaces.
  • Арматураны өзгөртпөңүз. Ар кандай өзгөртүүлөр кепилдикти жокко чыгарып, коопсуздук коркунучтарын жаратышы мүмкүн.
  • Keep flammable materials away from the fixture during operation.
  • Бул шайман d үчүн бааланганamp жерлер.

3. Продукциянын өзгөчөлүктөрү

The ASD 2x4 Center Basket LED Troffer Panel Light is designed for commercial and industrial applications, offering efficient and versatile lighting. Key features include:

  • Durable Commercial Grade Housing: Constructed from iron, resistant to rust and impact.
  • Anti-Glare PC Lens: Provides even light distribution and reduces glare.
  • Color and Power Selectable: Adjustable color temperatures (3500K, 4000K, 5000K) and power settings (34W, 38W, 45W).
  • Интегралдык драйвер: Features circuit overload, short circuit, and low-voltage коргоо.
  • Тез жана оңой орнотуу: Designed for recessed installation into grid ceilings with built-in T-grid clips.
Product features of the ASD LED Troffer Panel Light, highlighting durable housing, anti-glare lens, color and power selection, and quick installation.
Figure 3.1: ашыкview of the ASD LED Troffer Panel Light's key features.

4. Орнотуу жана орнотуу

Follow these steps for recessed installation into a grid ceiling. Ensure power is disconnected at the circuit breaker before beginning.

  1. Шыпты даярдоо: Ensure the ceiling grid opening is appropriate for a 2x4 fixture.
  2. Access Mounting Clips: Lift all mounting clips located along the edges of the panel. Turn the mounting clip head to prepare for securing.
  3. Арматураны жайгаштырыңыз: Carefully place the LED troffer panel into the ceiling grid opening.
  4. Түзмөктү камсыз кылуу: Once positioned, lower and secure the mounting clips onto the T-grid rails to hold the fixture in place.
  5. Зымдар: Locate the driver box. Remove the knockout hole with a screwdriver, then remove the screw and take out the driver cover. Connect the electrical wires as follows:
    • Black wire from fixture to Black (Line) wire from supply.
    • White wire from fixture to White (Neutral) wire from supply.
    • Green wire from fixture to Green (Ground) wire from supply.

    For dimming functionality, connect the 0-10V dimming wires (purple and gray) to a compatible 0-10V dimmer, if applicable. Ensure all connections are secure.

  6. Close Driver Box: Cover the driver box and tighten it with a screwdriver to complete the connection.
Diagram showing the quick and easy installation process of the LED troffer panel light into a grid ceiling, including securing clips and wiring connections.
Figure 4.1: Installation steps for the LED Troffer Panel Light.

For a full cut sheet with detailed diagrams, please refer to the official documentation: ASD LTR Cut Sheet (PDF).

5. Иштөө нускамалары

Your LED Troffer Panel Light features selectable color temperature and power settings, allowing customization to suit your environment.

5.1. Color Temperature Selection (CCT)

The fixture offers three color temperature options: 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight). A switch located on the fixture's driver allows you to select the desired CCT before or after installation. Ensure power is off when adjusting this switch.

5.2. Power Output Selection (Wattage)

You can also select between 34W, 38W, or 45W power output settings. A separate switch on the driver controls the wattage. Adjust this switch to achieve the desired brightness level. Ensure power is off when adjusting this switch.

5.3. Күңүрттөө функциясы

This luminaire supports 0-10V dimming. Connect the purple and gray dimming wires to a compatible 0-10V dimmer switch (sold separately) to adjust the light intensity from 100% down to 10%.

Diagram illustrating the color and power selectable switches on the LED troffer panel light, showing options for 3500K, 4000K, 5000K and 34W, 38W, 45W.
Figure 5.1: Switches for color temperature and power selection.

6. Техникалык тейлөө

The ASD LED Troffer Panel Light requires minimal maintenance.

  • Тазалоо: Ensure the power is disconnected before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
  • Колдонуучу тейлей турган бөлүктөр жок: The LED components and driver are integrated and not designed for user replacement. Do not attempt to open or repair the fixture.

7. Кыйынчылыктарды

If you encounter issues with your LED Troffer Panel Light, refer to the following common troubleshooting steps:

  • Жарык күйбөйт:
    • Түзмөккө кубат берүү үчүн автоматтык өчүргүчтү текшериңиз.
    • Verify all wiring connections are secure and correct (Line, Neutral, Ground).
    • Ensure the fixture's internal switches for CCT and wattage are set correctly and not in an intermediate position.
  • Жарык жымыңдайт же бүдөмүк:
    • Confirm the power output (wattage) switch is set to the desired level.
    • If using a dimmer, ensure it is a compatible 0-10V dimmer and that the dimming wires are correctly connected. Test the dimmer's functionality.
    • Бошогон зым байланыштарын текшериңиз.
  • Туура эмес түс температурасы:
    • Verify the CCT selection switch on the fixture is set to your preferred color temperature (3500K, 4000K, or 5000K).

Бул кадамдар көйгөйдү чечпесе, кардарларды колдоо кызматына кайрылыңыз.

8. Техникалык шарттар

Detailed specifications for the ASD 2x4 Center Basket LED Troffer Panel Light (Model A-LTR-24A45):

Product specification diagram for the ASD 2x4 Center Basket LED Troffer Panel Light, showing dimensions of 47-3/4 inches length, 23-3/4 inches width, and 2-1/8 inches height, along with power, CCT, and brightness details.
Figure 8.1: Product dimensions and key electrical specifications.
СпецификацияДеталь
Модель номериA-LTR-24A45(2p)
Өлчөмдөрү (L x W x Y)47.74" x 23.74" x 2.13" (1213 мм x 603 мм x 54 мм)
Ватtage34W / 38W / 45W (Selectable)
Жарыктык6028 люменге чейин
Натыйжалуулук134 лм/Вт
Түс температурасы (CCT)3500K / 4000K / 5000K (Тандоого болот)
Тtage120-277V
Dimmable0-10V караңгылатуу
МатериалIron, Polycarbonate
Ички/тышкы колдонууҮй ичинде гана колдонуу
Сууга туруктуулук деңгээлиСууга чыдамдуу эмес (Damp Жайгашкан жери боюнча бааланган)
СертификаттарUL, DLC Standard
Calculated Lifespan180,000 саатка чейин
Элемент Салмагы12.3 фунт

9. Кепилдик маалыматы

ASD provides a 5-year limited warranty for this product, guaranteeing top quality and safety. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

The product is UL and DLC certified, ensuring it meets high standards for safety and energy efficiency.

10. Кардарларды колдоо кызматы

For technical assistance, warranty claims, or any questions regarding your ASD LED Troffer Panel Light, please contact ASD Lighting Corp customer support. Refer to the product packaging or the official ASD webакыркы байланыш маалыматы үчүн сайт.

When contacting support, please have your model number (A-LTR-24A45) and proof of purchase readily available.

© 2024 ASD Lighting Corp. Бардык укуктар корголгон.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.