Introduction
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Коопсуздук маалыматы
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Пакеттин мазмуну
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Chair Base with Wheels
- Газ көтөрүүчү баллон
- Орундук жыйын
- Арка жамааты
- Баш таяныч
- Колтуктар (Сол жана Оң)
- Footrest (if applicable to your model)
- Монтаждоо жабдыктары (буроолор, шайбалар, аллен ачкычы)
- Instruction Manual
Монтаждоо көрсөтмөлөрү
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Assemble the Chair Base: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Колтуктарды бекитүү: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Артканы бекитүү: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Чогултулган отургучту жана аркалыкты газ көтөргүч цилиндрге этияттык менен орнотуңуз, анын борборлоштурулганын жана туруктуу экенин текшериңиз.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Иштөө нускамалары жана жөнгө салуулар
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Орундуктун бийиктигин жөндөө
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Вертикалдуу тууралоо: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. 3D жөнгө салынуучу колтук тирөөчтөрү
The armrests provide versatile support and can be adjusted in three dimensions:
- Бийиктигин тууралоо: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Айлануу: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Баштын башын тууралоо: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Жатуу функциясы: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Сүрөт: жакын план view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Техникалык тейлөө
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Тазалоочу тор кездеме: The breathable mesh fabric can be cleaned with a damp кездеме жана жумшак самын. Катуу химиялык заттардан алыс болуңуз.
- кадр тазалоо: Wipe the alloy steel frame and plastic components with a soft, damp кездеме.
- Дөңгөлөктөрдү тейлөө: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- бекиткичтерди бекемдөө: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
Сүрөт: чоңойтулган view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кресло бийиктигин тууралабайт | Газ көтөргүч цилиндринин бузук иштеши же рычаг иштебей калышы. | Бийиктикти жөндөө рычагы толук орнотулганын текшериңиз. Эгерде көйгөй чечилбесе, газ көтөргүч цилиндрди алмаштыруу керек болушу мүмкүн. Кардарларды тейлөө кызматына кайрылыңыз. |
| Стул солкулдап же өзүн туруксуз сезет | Бошогон бурамалар же тегиз эмес пол. | Бардык чогултуучу бурамаларды текшерип, бекемдеңиз. Отургучтун тегиз, бир калыпта турганын текшериңиз. |
| Armrests are loose | Монтаждоо бурамдары бош. | Tighten the screws securing the armrests to the seat. |
| Арткы таянгыч жөлөнбөйт же бекитилбейт | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Техникалык шарттар
- Бренд: Хбада
- Модел: E2
- Түсү: Кара
- Продукциянын өлчөмдөрү: 30.51"D x 22.24"W x 18.11"H
- Артка стили: Тор
- Жаш аралыгы (Сүрөттөм): бойго жеткен
- Кол стили: Padded, 3D Adjustable
- Материалды толтуруу: Тор
- Материал: Alloy Steel (Frame), Mesh (Seat/Back)
- Жатуучу позициянын саны: 3 (135 градуска чейин)
- Ийилүү: Ооба
- Форма фактору: Офис төрагасы
Кепилдик жана колдоо
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Бөлүктөрүн алмаштыруу: Parts are replaced, not repaired, for covered issues.
- 30 күндүк кайтаруу саясаты: Enjoy a 30-day return period without specific reasons required.
- Келип түшкөндө бузулган: Repair and replacement are guaranteed for items damaged during shipping.
- Кардарларды тейлөө: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Көбүрөөк маалымат алуу үчүн, киргиле Hbada Store on Amazon.