DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Киришүү

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Негизги өзгөчөлүктөрү

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ampмаалыматтарды сактоо үчүн орун.
• Вертикалдык GPU орнотуу: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Motherboard шайкештиги: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Өркүндөтүлгөн муздатуу колдоо: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Оптимизацияланган аба агымы: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Алдыңкы панелдин туташуусу: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Техникалык шарттар

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Орнотуу колдонмосу

4.1. Ишти даярдоо

1. Ишти таңгактан чыгаруу: Компьютердин корпусун таңгагынан этияттык менен чыгарыңыз.
2. Каптал панелдерин алып салуу: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Аксессуарларды текшерүү: Verify all included accessories (screws, cable ties, manual) are present.

4.2. Motherboard орнотуу

1. Standoffs орнотуу: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. I/O Shield орнотуу: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Mount Motherboard: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Дискти орнотуу (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Графикалык картаны (GPU) орнотуу

• Стандарттык орнотуу: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Тик орнотуу: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Муздатуу системасын орнотуу

• Алдын ала орнотулган күйөрмандар: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Кабелдик башкаруу

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Сүрөт: жарылды view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Иштөө нускамалары

• Күйгүзүү/өчүрүү: Use the power button located on the top front panel to turn the system on or off.
• Калыбына келтирүү баскычы: The reset button is also on the top front panel for system restarts.
• Алдыңкы панелдин порттору: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Техникалык тейлөө

• Чаң чыпкасын тазалоо: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Ички тазалоо: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Кыйынчылыктарды

• Система күйбөй жатат:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Check all internal power connections (24-pin ATX, CPU power, GPU power).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Дисплей чыгышы жок:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Графикалык картаны жана RAM модулдарын кайра орнотуңуз.
• Ашыкча ысып кетүү маселелери:
  • Ensure all case fans are spinning and connected correctly.
  • Чаң чыпкаларын жана ички компоненттерин тазалаңыз.
  • CPU муздаткычы туура орнотулганын жана CPU менен жакшы байланышта экенин текшериңиз.
• Диск аныкталган жок:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Кепилдик жана колдоо

The DARKROCK Classico Max computer case comes with a 1 жылдык кепилдик сатып алынган күндөн тартып. Бул кепилдик өндүрүштүк кемчиликтерди жана кадимки колдонуудагы материалдык кемчиликтерди камтыйт.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактаңыз.

Official DARKROCK Store: DARKROCK Amazon Store

9. Медиа галерея

Сүрөт: алдыңкы жагы view of the DARKROCK Classico Max computer case.

Сүрөт: Ички view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Сүрөт: жарылды view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

Videos