ACEZUK 7000A Car Jump Starter & 150PSI Air Compressor User Manual

1. Киришүү

Thank you for choosing the ACEZUK 7000A Car Jump Starter & 150PSI Air Compressor. This device is a versatile tool designed for emergency vehicle jump-starting, tire inflation, and as a portable power bank. Please read this manual thoroughly before use to ensure safe and optimal operation. Keep this manual for future reference.

Image 1.1: The ACEZUK 7000A Car Jump Starter and Air Compressor, ready for use with jumper cables.

2. Коопсуздук нускамалары

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle:

• Do not operate the jump starter if the battery clampс же кабелдер бузулган.
• Ensure proper polarity when connecting the jumper cables to the vehicle battery (red to positive, black to negative). Reverse polarity can cause sparks and damage.
• Тоңуп калган батареяны секирип иштетпеңиз.
• Аппаратты балдардан алыс кармаңыз.
• Түзмөктү жамгырдын же өтө жогорку температуранын таасирине дуушар кылбаңыз.
• Батареяны кыска туташуудан сактаныңыз clamps.
• Wear eye protection when working with vehicle batteries.
• Do not use the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down between uses.
• Аппаратты колдонбогондо салкын, кургак жерде сактаңыз.

Image 2.1: The smart jumper cables feature 8 protection mechanisms for safe operation, including protection against overheating, overcharging, over-discharge, overcurrent, overvoltage, short circuits, reverse polarity, and anti-interference.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• ACEZUK Jump Starter & Air Compressor Unit
• Smart Jumper кабелдери
• Аба шланг
• USB Type-C кубаттоочу кабель
• Various Nozzle Adapters (for balls, bicycles, inflatable toys)
• Сактоочу баштык
• Колдонуучунун Колдонмосу (бул документ)

Image 3.1: The complete package contents, including the main unit, jumper cables, air hose, charging cable, various adapters, and a storage bag.

4. Продукт бүтүп калдыview

Familiarize yourself with the components and controls of your ACEZUK device.

4.1 Негизги блок

• 3.4" LCD дисплей: Shows battery level, tire pressure, and operating modes.
• Башкаруу баскычтары: M (Mode), OK (Power/Confirm), +/-(Adjust Pressure), Light (LED).
• Jump Start Port: For connecting smart jumper cables.
• Аба шланг порту: For connecting the air hose.
• USB чыгаруу порттору (x2): Тышкы түзмөктөрдү кубаттоо үчүн.
• Type-C Input Port (x1): Стартерди кубаттоо үчүн.
• LED жарык: Integrated flashlight with multiple modes.

Image 4.1: The control panel of the ACEZUK device, highlighting the LCD display and function buttons.

Image 4.2: The device's display provides real-time information on battery level and tire pressure.

5. Орнотуу

5.1 Аппаратты заряддоо

Before first use, fully charge the ACEZUK jump starter. Connect the provided USB Type-C cable to the device's Type-C input port and a suitable USB power adapter (not included). The LCD display will show the charging status. A full charge is indicated when the battery icon is full.

Important: Ensure the device is fully charged before attempting to jump-start a vehicle.

6. Иштөө нускамалары

6.1 Унаанын секирип от алдыруу

1. Стартердин кеминде 50% заряддалганын текшериңиз.
2. Унааңыздын от алгычын жана бардык аксессуарларын өчүрүңүз.
3. Insert the smart jumper cable plug into the jump start port on the ACEZUK unit.
4. Кызыл (+) cl туташтырыңызamp унааңыздын аккумуляторунун оң терминалына.
5. Кара (-) cl туташтырыңызamp унааңыздын аккумуляторунун терс терминалына.
6. Once connected, the smart cable indicator light will show its status. If it's green, it's safe to proceed. If it's red or flashing, check connections and battery status.
7. Унааңыздын кыймылдаткычын иштетиңиз.
8. Once the engine starts, immediately remove the jumper cables from the vehicle battery (black first, then red), and then disconnect the cable from the jump starter unit.

Image 6.1: The jump starter connected to a car battery, illustrating the correct setup for jump-starting.

6.2 Аба компрессорун колдонуу

1. Connect the air hose to the air hose port on the ACEZUK unit.
2. Attach the other end of the air hose to the tire valve or use the appropriate nozzle adapter for other inflatables.
3. Press the "OK" button briefly to turn on the compressor. The LCD will display the current pressure.
4. Press the "M" button to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Manual). Each mode has a preset pressure range.
5. Use the "+" and "-" buttons to adjust the target pressure. Press briefly to change by small increments, or long-press for rapid adjustment.
6. Press the "OK" button to start inflation. The compressor will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire/inflatable and the unit.

Note: Do not operate the compressor for more than 10 minutes continuously. Allow a 10-minute cool-down period after each 10 minutes of use.

Image 6.2: The device actively inflating a car tire using its integrated air compressor function.

Image 6.3: Step-by-step guide for using the air compressor to inflate a tire.

Сүрөт 6.4: Бүттүview of preset inflation modes and their respective pressure ranges.

6.3 LED жарыгын колдонуу

The integrated LED light has three modes: Bright, Strobe, and SOS.

1. Press the Light button briefly to turn on the LED light (Bright mode).
2. Press again to cycle through Strobe mode.
3. SOS режимине өтүү үчүн үчүнчү жолу басыңыз.
4. LED жарыгын өчүрүү үчүн төртүнчү жолу басыңыз.

Сүрөт 6.5: Мисamples of the LED light's utility in various situations, including night repairs and outdoor activities.

6.4 Power Bank катары колдонуу

The device can charge other electronic devices via its USB output ports.

1. Connect your electronic device (smartphone, tablet, etc.) to one of the USB output ports using a compatible USB cable.
2. The ACEZUK unit will automatically begin charging your device.

Image 6.6: The device functioning as a portable power bank, charging various electronic gadgets.

7. Техникалык тейлөө

• Аппаратты кургак, жумшак чүпүрөк менен тазалаңыз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
• Батареянын иштөө мөөнөтүн сактоо үчүн, колдонулбаса дагы, түзмөктү ар бир 3-6 ай сайын кубаттап туруңуз.
• Store the device in a cool, dry environment, away from direct sunlight and extreme temperatures.
• Inspect jumper cables and air hose for any damage before each use.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

ACEZUK products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact ACEZUK customer support.

If you encounter any issues or have questions regarding your product, please contact our customer support team through the retailer where you purchased the product or visit the official ACEZUK webбайланыш маалыматы үчүн сайт.

Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.