OUMIFAND H100 Series Variable Frequency Drive User Manual

1. Киришүү

Thank you for choosing the OUMIFAND H100 Series Variable Frequency Drive (VFD). This manual provides essential information for the safe and efficient operation, installation, and maintenance of your VFD. The H100 series is designed for precise motor speed control and phase conversion in various industrial applications. Please read this manual thoroughly before installation and operation to ensure proper usage and to prevent damage to the equipment or injury to personnel.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Improper installation or operation may result in electric shock, fire, or serious injury. Always adhere to local electrical codes and safety regulations.

• Бул жабдууларды квалификациялуу персонал гана орнотуп, иштетип жана тейлөөсү керек.
• Ensure the power supply is disconnected before performing any wiring, inspection, or maintenance. Wait at least 5 minutes after power-off for capacitors to discharge.
• Do not touch the VFD terminals when power is applied or immediately after power-off.
• VFD жана мотордун туура жерге туташтырылганын камсыз кылыңыз.
• Do not operate the VFD with damaged cables or if the enclosure is open.
• Protect the VFD from moisture, dust, corrosive gases, and direct sunlight.

3. Продукт бүтүп калдыview

3.1 Тиркемелер

The OUMIFAND H100 Series VFD is suitable for a wide range of industrial applications requiring precise motor speed control and efficient power conversion.

The OUMIFAND H100 Series Variable Frequency Drive is versatile, suitable for various industrial applications such as pharmaceutical equipment, woodworking machinery, and textile machinery, enabling precise motor speed control.

3.2 Негизги өзгөчөлүктөрү

The H100 VFD offers advanced functionalities for optimal performance and control.

This image illustrates the powerful functions of the OUMIFAND H100 VFD, including high accuracy, high moment of force, multiple speed modes (up to 8/16), support for both synchronization and non-synchronization, and a wide speed regulating range for diverse operational needs.

• High Accuracy: Provides precise control over motor speed.
• High Moment of Force: Delivers strong torque output.
• Up to 8/16 Speed Modes Selection: Offers flexibility in speed control.
• Both Synchronization & Non-Synchronization: Adaptable to various motor types.
• Wide Speed Regulating Range Driving: Allows for broad operational adjustments.

3.3 Multiple Safeguards

The H100 VFD is built with robust safety features to protect both the device and the connected equipment.

The OUMIFAND H100 VFD is equipped with multiple safeguards for reliable operation, featuring an ABS flame-retardant material case, fuse protection, overload protection, over-voltagе коргоо, жана under-томtage protection to ensure user and equipment safety.

• ABS Flame Retardant Material Case: Provides enhanced fire safety and durability.
• Fuse Protection: Safeguards against overcurrents.
• Overload Protection: Prevents damage from excessive loads.
• Ашык-томtage Protection: Protects against high voltage шиптер.
• Томдун астындаtage Protection: Ensures stable operation during low voltage шарттары.

4. Орнотуу жана орнотуу

4.1 Монтаждоо

• VFDди туруктуу, күйбөй турган бетке тигинен орнотуңуз.
• Ensure adequate ventilation space around the unit (at least 10 cm on all sides) to prevent overheating.
• Avoid locations with direct sunlight, high temperatures, excessive dust, moisture, or corrosive gases.

4.2 Электр зымдары

ЭСКЕРТҮҮ: All wiring must be performed by a qualified electrician. Ensure power is disconnected before wiring.

1. Кубат киргизүү (R, S, T же L1, L2): Connect the main power supply to the input terminals. Refer to the specific model specifications for 1-phase or 3-phase input requirements.
2. Мотордун чыгышы (U, V, W): Connect the three-phase motor to these output terminals. Ensure correct phase sequence.
3. Жерге туташтыруу (PE): Connect the ground terminal of the VFD to a reliable earth ground.
4. Башкаруу терминалдары: For external control (e.g., start/stop, speed reference, fault indication), refer to the detailed wiring diagram in the full product manual.
5. Use appropriate wire gauges for all connections to handle the rated current.

5. Иштөө нускамалары

5.1 Башкаруу панелинин үстүнөview

The VFD features a user-friendly control panel for direct operation and parameter setting.

• RUN баскычы: Моторду иштетет.
• STOP баскычы: Моторду токтотот.
• ESC баскычы: Учурдагы менюдан чыгат же операцияны жокко чыгарат.
• SET баскычы: Enters parameter setting mode or confirms a selection.
• Өйдө/төмөн жебелер: Менюлар аркылуу өтүңүз же параметр маанилерин тууралаңыз.
• F/R баскычы: Changes the motor's rotation direction (Forward/Reverse).
• Ылдамдык баскычы: Adjusts the output frequency/motor speed directly.
• Санариптик дисплей: Shows current operating status, frequency, or parameter values.

5.2 Негизги операция

1. Күйгүзүү: VFDди тиешелүү кубат булагына туташтырыңыз. Санариптик дисплей күйөт.
2. Моторду ишке киргизүү: басыңыз RUN баскычын басыңыз. Мотор белгиленген жыштыкка чейин ылдамдай баштайт.
3. Ылдамдыкты жөндөө: айлантыңыз Speed ​​Knob to increase or decrease the motor speed.
4. Багытын өзгөртүү: басыңыз F/R button to reverse the motor's rotation.
5. Моторду токтотуу: басыңыз ТОКТОТ баскычын басыңыз. Мотор жайлап, токтоп калат.

5.3 Параметр Орнотуулары

The VFD has numerous parameters that can be adjusted to customize its operation for specific applications. Refer to the comprehensive parameter list in the full product manual for detailed descriptions and adjustment procedures. Common parameters include acceleration/deceleration times, maximum/minimum output frequency, motor parameters, and control modes.

1. Басыңыз SET to enter the parameter menu.
2. Колдонуу Өйдө/төмөн жебелер to navigate through parameter groups and individual parameters.
3. Басыңыз SET түзөтүү үчүн параметрди тандоо үчүн кайрадан басыңыз.
4. Колдонуу Өйдө/төмөн жебелер параметр маанисин өзгөртүү үчүн.
5. Басыңыз SET жаңы маанини сактоо үчүн.
6. Басыңыз ESC параметр менюсунан чыгуу үчүн.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and reliable operation of your VFD.

• Күнүмдүк текшерүү: Адаттан тыш ызы-чууларды, титирөөлөрдү же жыттарды текшериңиз. Дисплейде ката коддорун байкап туруңуз.
• Жумалык тазалоо: Keep the VFD clean and free from dust and debris. Use a soft, dry cloth. For internal cleaning, disconnect power and use compressed air to clear heat sinks and fans.
• Ай сайын текшерүү: Inspect all wiring connections for tightness. Ensure cooling fans are operating correctly and are not obstructed.
• Жылдык текшерүү: Have a qualified technician inspect the VFD's internal components, including capacitors and power modules, for signs of wear or damage.
• Always ensure power is disconnected and capacitors are discharged before any maintenance.

7. Кыйынчылыктарды

This section provides solutions to common issues. For complex problems, contact technical support.

8. Техникалык шарттар

The OUMIFAND H100 Series Variable Frequency Drives are available in various power ratings and input voltages. Below are the detailed specifications for common models.

8.1 Model: 2.2KW 3HP 110V (Current Product Variant)

8.2 Model: H100-3S2-1B (3KW 4HP 220V)

8.3 Model: H100-4S2-1B (4KW 5.5HP 220V)

8.4 Model: H100-7.5S2-1B (7.5KW 10HP 220V)

9. Кепилдик жана колдоо

OUMIFAND products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your authorized dealer. Please have your model number and purchase date available when contacting support.