1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of the YUHANUS Smart Door Access Control System. This kit is designed to provide secure and convenient access management for outswinging doors, integrating a 600lbs magnetic lock with Tuya App and remote control capabilities.
2. Пакеттин мазмуну
Төмөндө саналып өткөн бардык компоненттер пакетиңизге камтылганын текшериңиз:
- 600lbs Magnetic Lock with Built-in Alarm Beeper
- Power Supply Controller (Model: SP1203)
- 2 Алыстан башкаруучулар
- Stainless Steel Exit Button
- Power Plug Connector
- Mounting Hardware (screws, washers, L-bracket, Z-bracket)
Сүрөт 2.1: Бүттүview of the YUHANUS Smart Door Access Control System kit components.
3. Продукттун спецификациялары
| Өзгөчөлүк | Спецификация |
|---|---|
| Magnetic Lock Holding Force | 600 фунт |
| Power Supply Input | AC 100-240V |
| Кубат менен жабдуу | DC 12V / 3A |
| Timer Adjustment (Power Supply) | 0-15 секунд |
| Алыстан башкаруу жыштыгы | 433 МГц |
| Max Remote Controllers Supported | 30 шт |
| Door Type Compatibility | Outswinging doors |
| Alarm Beeper | Integrated in magnetic lock |
| Колдонмо башкаруу | Tuya App |
4. Орнотуу боюнча колдонмо
4.1 Коопсуздук чаралары
- Ensure power is disconnected before beginning any installation or wiring.
- Эгерде сиз зымдарды орнотуунун кандайдыр бир жол-жоболору боюнча күмөн санасаңыз, квалификациялуу электрикке кайрылыңыз.
- Орнотуу учурунда тиешелүү коопсуздук шайманын кийиңиз.
4.2 Magnetic Lock Installation (Outswinging Door)
For outswinging doors, the magnetic lock body is typically mounted on the door frame, and the armature plate is mounted on the door. Z and L brackets are required for proper alignment.
- Mount the L-Bracket: Secure the L-bracket to the door frame using the provided screws. Ensure it is level and positioned correctly for the magnetic lock body.
- Mount the Magnetic Lock Body: Attach the magnetic lock body to the L-bracket.
- Mount the Z-Bracket: Assemble the Z-bracket components and attach them to the door. The Z-bracket allows the armature plate to align with the magnetic lock body.
- Attach the Armature Plate: Secure the armature plate to the Z-bracket. Ensure the armature plate can pivot slightly to allow for full contact with the magnetic lock face.
- Тегиздөө: Close the door and adjust the position of the magnetic lock and armature plate to ensure full contact and secure locking.
Image 4.1: Z and L brackets used for mounting the magnetic lock on outswinging doors.
Image 4.2: The 600lbs magnetic lock and its corresponding armature plate.
4.3 Exit Button Installation
Mount the stainless steel exit button in a convenient location near the door on the secure side. Ensure it is easily accessible for exiting personnel.
Image 4.3: The stainless steel push-to-exit button.
4.4 Power Supply Controller Installation
Mount the power supply controller in a secure, dry location, preferably near the door frame but out of direct reach. Ensure proper ventilation.
Image 4.4: The SP1203 power supply controller.
4.5 Электр өткөргүч схемасы
Follow the wiring diagram carefully to connect all components. Incorrect wiring can damage the system or pose a safety risk.
Image 4.5: Detailed wiring diagram for connecting the magnetic lock, exit button, and power supply.
- Connect the magnetic lock to the NC (Normally Closed) and COM (Common) terminals on the power supply.
- Connect the exit button to the PUSH жана GND (Ground) terminals on the power supply.
- Connect the AC power cable to the N (Neutral) and L (Live) terminals on the power supply.
- Бардык байланыштар коопсуз жана изоляцияланганын текшериңиз.
5. Иштөө нускамалары
5.1 Жалпы операция
Once installed and powered, the magnetic lock will engage, securing the door. To unlock the door:
- Ичинен: Press the stainless steel exit button. The lock will disengage for the set duration (0-15 seconds), allowing the door to open.
- From Outside (Remote): Press the unlock button on the remote controller. The lock will disengage.
- From Outside (Tuya App): Use the Tuya App on your smartphone to remotely unlock the door.
5.2 Tuya тиркемесинин интеграциясы
The power supply controller is compatible with the Tuya Smart App for remote access control.
- Колдонмону жүктөп алуу: Download the Tuya Smart App from your smartphone's app store.
- Катталуу/Кирүү: Create an account or log in to your existing Tuya account.
- Түзмөк кошуу: Follow the in-app instructions to add a new device. The power supply controller should be discoverable when in pairing mode. Refer to the power supply manual for specific pairing mode activation.
- Алыстан кулпуну ачуу: Once connected, you can use the app to remotely unlock the door from anywhere with an internet connection.
5.3 Алыстан башкарууну жупташтыруу
The kit includes two pre-paired remote controllers. If you need to add more remotes (up to 30 total) or re-pair existing ones:
- Жупташтыруу режимине кирүү: Locate the pairing button or switch on the power supply controller (refer to the power supply diagram for '433 SET'). Press and hold it until an indicator light or sound confirms pairing mode.
- Press Remote Button: While the power supply is in pairing mode, press any button on the remote controller you wish to pair.
- Ырастоо: The power supply will indicate successful pairing (e.g., a beep or light change).
- Жупташтыруу режиминен чыгуу: The pairing mode will typically time out automatically or can be exited by pressing the pairing button again.
Image 5.1: One of the remote controllers for the access system.
6. Техникалык тейлөө
Regular maintenance ensures optimal performance and longevity of your access control system.
- Clean Magnetic Lock: Periodically clean the face of the magnetic lock and the armature plate with a soft, dry cloth to ensure full contact and prevent debris buildup.
- Зымдарды текшерүү: Inspect all wiring connections annually for any signs of wear, corrosion, or loose terminals. Tighten as necessary.
- Сыноо функциясы: Regularly test the exit button, remote controls, and Tuya App functionality to ensure the system is operating correctly.
- Программалык камсыздоо жаңыртуулары: Keep the Tuya Smart App updated to the latest version for optimal performance and security.
7. Кыйынчылыктарды
Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицага кайрылыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Magnetic lock does not engage. | No power; loose wiring; faulty lock. | Check power supply connection; verify all wiring according to diagram; test lock with direct 12V power. |
| Door does not unlock with exit button. | Exit button wiring issue; faulty button. | Check exit button wiring to PUSH and GND terminals; test button continuity. |
| Remote control does not unlock door. | Remote not paired; remote battery low; interference. | Re-pair remote control (Section 5.3); replace remote battery; check for signal interference. |
| Tuya App cannot control the lock. | No internet connection; app not paired; power supply offline. | Ensure stable Wi-Fi connection; re-pair device in Tuya App; check power supply status. |
| Alarm beeper activates unexpectedly. | Door not fully closed/secured; sensor malfunction. | Ensure door is fully closed and armature plate makes full contact; inspect lock for damage. |
8. Коопсуздук маалыматы
- This system is designed for low-voltage applications. Do not connect directly to high voltage without the power supply controller.
- Ensure all wiring is done according to local electrical codes and standards.
- Keep the power supply and magnetic lock away from water and excessive moisture.
- Do not attempt to modify or repair the components yourself. Contact support for assistance.
9. Кепилдик жана колдоо
This product comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the product packaging or contact the seller directly. For technical support, troubleshooting assistance, or replacement parts, please contact YUHANUS customer service through the platform of purchase.