DieseRC Wireless Roller Shutter Remote Control Switch User Manual

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and programming of your DieseRC Wireless Roller Shutter Remote Control Switch. This device is designed to wirelessly control AC motors, enabling forward, reverse, and stop functions for applications such as garage doors, electric gates, and roller shutters. Please read this manual carefully before use to ensure proper functionality and safety.

2. Пакеттин мазмуну

• 1 x Relay Receiver Board
• 2 x Transmitters (battery included)
• 1 x Продукт колдонмосу

3. Техникалык шарттар

4. Орнотуу

4.1 Коопсуздук чаралары

• Ар кандай зымдарды туташтыруудан мурун, электр кубатынын өчүрүлгөнүн текшериңиз.
• Wiring should be performed by a qualified electrician if you are unsure.
• Verify correct polarity (Live, Neutral) to avoid damage or short circuits.

4.2 Кабылдагычты туташтыруу

Connect the receiver to your AC motor and power supply according to the diagram below. The receiver supports AC 90V-250V input. Ensure secure connections for all wires.

Image: Receiver dimensions and wiring diagram. Note the 'Up' and 'Down' motor connections and AC 90-250V power input.

The receiver features large screw ports for easy installation and metal clips for secure wiring. A transparent flip cover allows for circuit adjustment.

Сүрөт: деталдуу view of the receiver's screw terminals and cable compatibility.

4.3 Баштапкы кубаттуулук

After wiring, apply power to the receiver. The indicator light on the receiver will illuminate, indicating it is ready for operation or programming.

4.4 Продукт бүттүview Video

Видео: Бул видеодо толук маалымат берилетview of the DieseRC 2201COM receiver and KT03 remote control, highlighting their design and features.

5. Иштөө режимдери

The DieseRC remote control switch supports three main operating modes: Momentary, Toggle, and Latched. All products are set to Toggle mode before shipment. If you wish to change the operating mode, you must first reset the receiver (see Section 6.2).

Image: Visual representation of Momentary, Toggle, Latched, and Delay operating modes.

5.1 Убакыт режими

• "басып, кармап туруңуз▲" button: The motor rotates forward.
• Release the button: The motor stops.

5.2 Которуу режими

• басыңыз "▲" button once: The motor rotates forward.
• басыңыз "▲" button again: The motor stops.

5.3 Кулпуланган режим

• басыңыз "▲" button: The motor rotates forward.
• басыңыз "▼" button: The motor rotates backward.
• басыңыз "■" button: The motor stops.

5.4 Колдонмо Examples

Сүрөт: Мисample of the remote control switch used for a garage door.

Video: This video demonstrates various applications of the DieseRC Wireless Roller Shutter Remote Control Switch, showcasing its functionality in controlling different types of AC motors.

6. Алыстан башкаруу элементтерин программалоо

The receiver can store up to 20 transmitters. Follow these steps to program your remote control to the desired operating mode.

Image: Step-by-step programming instructions for different modes.

6.1 Learning a Remote Control

1. Press the learning button on the receiver:
   • Басыңыз 1 жолу for Momentary Mode.
   • Басыңыз 2 жолу for Toggle Mode.
   • Басыңыз 3 жолу for Latched Mode.
   Wait 3 seconds after pressing.
2. басыңыз "▲" button on your remote control. Wait 3 seconds.
3. басыңыз "▼" button on your remote control. The programming is successful.

Note: For Latched Mode, the remote control requires 3 keys (Forward, Reverse, Stop).

6.2 Resetting the Receiver

To clear all programmed remote controls from the receiver's memory:

• Press the learning button on the receiver 8 жолу.

Important: After resetting, all previously programmed remote controls will no longer work and must be re-programmed.

6.3 Programming Demonstration Video

Video: A step-by-step video guide on how to program the DieseRC 2201COM receiver, covering the different operating modes and remote control pairing.

7. Техникалык тейлөө

7.1 Transmitter Battery Replacement

The remote control transmitters use 2 x CR2016 batteries. If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the transmitter image for visual guidance.

Image: DieseRC remote control transmitter.

7.2 Тазалоо

Wipe the receiver and transmitters with a dry, soft cloth. Do not use abrasive cleaners or solvents.

7.3 Экологиялык шарттар

Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight. Ensure the receiver is installed in a location with adequate ventilation.

8. Кыйынчылыктарды

• Алыстан башкаруу жооп бербей жатат:
  • Check the battery in the transmitter. Replace if necessary.
  • Ensure the receiver has power.
  • If the receiver was recently reset, re-program the remote control (see Section 6.1).
  • Ensure the remote is within the effective operating range (20-50 meters).
• Мотор кыймылдабай жатат:
  • Бардык зымдардын туташууларынын бекем жана туура экенин текшериңиз (4.2-бөлүмдү караңыз).
  • Check the power supply to the receiver and motor.
  • Ensure the motor itself is functioning correctly.
• Интерференция:
  • While multiple remote control sets can be used in the same area without interference (except in Momentary mode), strong local RF interference might affect performance. Try relocating the receiver if possible.

9. Кепилдик жана колдоо

DieseRC products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please reach out to DieseRC customer support through the vendor's contact information provided at the point of purchase.